Delta RMC151 - Manual (Page 294)

RMC70/150 and RMCTools User Manual
Download All to Controller: Downloads all the parameters from the project to the
currently selected controller. This will overwrite the controller values.
Upload All from Controller: Uploads all the parameters from the currently
selected controller to the project. This will overwrite the project values.
Save Communication Log: Saves the log of RMCTools communications with the
RMC. This is only useful when requested by Delta technical support.
RUN Mode: Puts the controller in RUN Mode.
PROGRAM Mode: Puts the controller in PROGRAM Mode.
Enable Controller: Issues an Enable Controller (7) command.
Fault Controller: Issues a Fault Controller (8) command.
Clear All Faults: Issues a Clear Faults (4) command to every axis.
Update Flash: Updates the Flash memory.
View/Change Modules: Opens the View/Change Controller Hardware dialog.
View/Change Axis Definitions: Opens the Axis Definitions dialog.
Reset Controller to Defaults: Resets the controller to its default settings.
View Communication Statistics: Opens the Communication Statistics window.
Programming
Download Programs to Controller: Downloads all the contents of the
Programming folder to the controller.
Upload Programs from Controller: Uploads all of the contents of the
Programming folder from the controller.
Compare to Controller: Compares the Programming node of the project with
that of the RMC. Yellow warning triangles and a yellow background will mark the
items where differences exist. To resolve the differences, download or upload the
Programming node.
New User Program: Creates a new User Program.
Export User Program: Exports a User Program.
Import User Program: Imports a User Program.
Verify Programs: Verifyies the programs (all the contents of the Programming
folder).
Lock Programming: Locks the user programs so changes cannot be made. See
Programming Security for details.
Unlock Programming: Unlocks the user programs so changes can be made. See
Programming Security for details.
Browse Labels: Displays a list of all the Labels in the user programs and their
locations.
Plots
Open Plot Manager: Opens the Plot Manager.
Edit Plot Templates: Opens the Plot Template Editor.
Download Plot Templates to Controller: Downloads the Plot Templates to the
controller.
Upload Plot Templates from Controller: Uploads the Plot Templates from the
controller.
Compare to Controller: Compares the Plots node of the project with that of the
RMC. Yellow warning triangles and a yellow background will mark the items
where differences exist. To resolve the differences, download or upload the Plots
node.
Save Plots: Save any of the plots listed on the History tab.
274 Delta Computer Systems, Inc.