Delta RMC151 - Manual (Page 272)

RMC70/150 and RMCTools User Manual
view these events, you must set the filter to include them. Other events that appear by
default may sometimes flood the log - such as user program step transitions - and make it
difficult to see other events. You can set the filter to exclude these events.
To change the filter configuration, on the Event Log toolbar, click the Event Log Properties
button. The Event Log Properties dialog will open:
For each item on the left, a list of events will be displayed on the right. All events that are
checked will be included in the Event Log. To exclude an event, choose an item on the left,
and clear the check box of the event you wish to exclude. When you are finished, click OK and
the changes will be automatically applied to the controller if you are online.
In general, errors cannot be filtered out.
Filtered Items
Item Description
Controller
Register Write Errors
Logs all errors that occur when registers are written to .
Flash Update Events Logs when the controller Flash update is started and
when it successfully completes.
This category does not include logging of errors during
Flash updates.
RUN/PROGRAM Mode
Changes
Logs all changes to the RUN/PROGRAM mode.
Axes
Commands Received
Logs all commands received by the controller, and logs
transitions.
252 Delta Computer Systems, Inc.