Delta RMC151 User Manual
Page 1082
RMC70/150 and RMCTools User Manual
1.000000). It can be
used as a master for
Curves that are to
run based on time.
F20:11-
31
10263-
10303
D10262
D10302
-
%MD20.11-
31
-
-
Reserved
RMC70 Registers, File 21: Communication Configuration
Address
Modbus
Address
External
Data
Internal
IEC
Address
Internal
Access Register Name
RMC75E
F21:0-7 10753-
10767
D10752-
D10766
-
%MD21.0-7
-
Read Only Reserved
F21:8
10769
D10768 DWORD %MD21.8 DWORD Read Only MAC Address (bytes 0-3)
big Endian, (for 00-50-A0-A1-23-45, this
would be 0x0050A0A1)
F21:9
10771
D10770 DWORD %MD21.9 DWORD Read Only MAC Address (bytes 4-5)
big Endian, in upper 16 bits (for 00-50-
A0-A1-23-45, this would be
0x23450000)
F21:10 10773
D10772 DWORD %MD21.10 DWORD Read Only Ethernet Status Bits
F21:11 10775
D10774 DWORD %MD21.11 DWORD Read/Write Ethernet Configuration Bits
F21:12 10777
D10776 DWORD %MD21.12 DWORD Read/Write IP Address
F21:13 10779
D10778 DWORD %MD21.13 DWORD Read/Write Subnet Mask (0=use standard network
masks)
F21:14 10781
D10780 DWORD %MD21.14 DWORD Read/Write Default Gateway (0=none)
F21:15 10783
D10782 DWORD %MD21.15 DWORD Read Only DHCP (or BOOTP) server IP Address
F21:16 10785
D10784 DINT
%MD21.16 DINT
Read Only DHCP Lease Start (seconds since
powerup)
F21:17 10787
D10786 DINT
%MD21.17 DINT
Read Only DHCP Lease End (seconds since
powerup)
F21:18 10789
D10788 DINT
%MD21.18 DINT
Read/Write EtherNet/IP Class 1 TTL (time-to-live)
F21:19 10791
D10790 DINT
%MD21.19 DINT
Read/Write EtherNet/IP Class 1 Start of Multicast
Address Block
F21:20 10793
D10792 DINT
%MD21.20 DINT
Read/Write EtherNet/IP Class 1 Size of Multicast
Address Block
F21:21 10795
D10794 DWORD %MD21.21 DWORD Read/Write Ethernet Outgoing Cyclic I/O Data
Source
F21:22 10797
D10796 DWORD %MD21.22 DWORD Read/Write Ethernet Incoming Cyclic I/O Data
Destination
F21:23 10799
D10798 DWORD %MD21.23 DWORD Read Only Controlling Connection Status
F21:24 10801
D10800 DINT
%MD21.24 DINT
Read Only Controlling PLC Status
F21:25 10803
D10802 DINT
%MD21.25 DINT
Read/Write Ethernet App Flags
Bits 0-3 - I/O Data Mode
0=Use a Sync Register
1062
Delta Computer Systems, Inc.