General tools, Uploading and downloading, Download – Delta RMC151 User Manual
Page 274: Upload and download, Upload
RMC70/150 and RMCTools User Manual
Data Channel 0 Logging
For the Basic/Enhanced modes, logs the specified actions
from Data Channel 0.
None: Do not log any actions from Data Channel 0.
Requests: Log only read or write requests from Data
Channel 0.
All: Log every change in the Data Channel 0 data.
Data Channel 1 Logging
For the Basic/Enhanced modes, logs the specified actions
from Data Channel 1 (available only in Enhanced RMC
PROFIBUS modes).
None: Do not log any actions from Data Channel 1.
Requests: Log only read or write requests from Data
Channel 1.
All: Log every change in the Data Channel 1 data.
I/O Mode Data Logging
For the I/O modes, logs the PROFIBUS Output Data
(coming from the PLC to the RMC) each time there is a
change in the data.
Configuration Information
Logs PROFIBUS initialization state changes and
configuration and parameterization information received
from the PROFIBUS master.
4.16. General Tools
4.16.1. Uploading and Downloading
Downloading transfers data from RMCTools to the RMC controller.
Uploading transfers data from the RMC controller to RMCTools.
Note:
RMCTools must be online in order to upload or download.
Note:
When downloading, the new data will write over the existing RMC data. However, it will not be
saved in Flash until you update Flash.
Instructions
In general, items in the Project pane can be uploaded or downloaded by right-clicking and
choosing Upload from Controller or Download to Controller. In many editor
windows, the window contents can be uploaded or downloaded by clicking the download
button or the upload button . Uploading and downloading can also be accessed from
the Controller, Programming and Editor menus.
Item
Location of Download/Upload
All project contents
In the project pane, right-click the controller.
Axis Parameters
In Axis Tools window toolbar.
Programming (includes Variables (not
Current Values), Discrete I/O
Configuration, Program Triggers, User
In the project pane, right-click the
Programming folder.
254
Delta Computer Systems, Inc.