Delta RMC151 - Manual (Page 276)

RMC70/150 and RMCTools User Manual
or warnings caused by a program running in the RMC, but you still want to see error
resulting from actions in RMCTools, such as issuing a command with invalid parameters.
To disable the Error Bubble Pop-up:
• Right-click the Error Icon and choose Disable Error Popup. The Error Bubble will no
longer pop up.
Or, right-click the Error Icon and choose Pop up for Local Errors Only. The Error
Bubble will only pop up for errors caused by action in RMCTools.
Viewing the Error History
The Error History displays up to the last ten errors that were displayed in the error
bubble. To view the Error History, click the Error Icon.
Clearing the Error History
To clear the Error History, right-click the Error Icon and choose Clear Error History. The
icon will no longer contain an x: .
Note:
If the Event Log is paused due to the Pause/Resume Log (95) command, the Error Icon and
Error Bubble will not operate normally. Using the Pause button in the Event Log Monitor will
not affect the Error Icon and Error Bubble.
4.16.3. Address Selection Tool (Single Register)
To access this dialog:
This dialog can be accessed from Command Parameters that require a register, or the Delay
Link Type in User Programs. To open this dialog, click the ellipsis button in the box that
requires an address entry.
Use this dialog to select a register to enter in a Command Parameter in a User Program or the
Command Tool, or in the Delay Link Type in User Programs.
To choose a register:
a. Browse to the register you need and select it.
b. Click OK.
You can also select a register by typing the address in the Address box.
4.16.4. Output Window
To access this window:
On the View menu, click Output, or press Alt+1.
The Output window is a dockable window in RMCTools. The output window has the following
functions:
• Displays the results of downloading all settings to the RMC.
• Displays the results of uploading all from the controller.
256 Delta Computer Systems, Inc.