Delta RMC151 - Manual (Page 1023)

9 Register Reference
Type: Communications Register
RMC70 Address: %MD21.11. See Register Map topic for other address formats.
RMC150
Address:
%MD45.11. See Register Map topic for other address formats.
System Tag: _Enet.Config
How to Find: Address Selection Tool → Controller → Communication Settings →
Ethernet
Data Type: DWORD
Accessibility: Read/Write
This register indicates the state of various Ethernet communication items.
Bit Tag Name
Description
0 _Enet.Config.ManConfig Disable Auto-Negotiation
True: Auto-Negotation is disabled.
False: Use Auto-Negotation (use bits 1 and 2).
1 _Enet.Config.Man100Mbps 100 Mbps
Valid only if _Enet.Config.ManConfig is True.
True: Ethernet speed is set to 100 Mpbs.
False: Ethernet speed is set to 10 Mpbs.
2 _Enet.Config.ManFDX Full Duplex
Valid only if _Enet.Config.ManConfig is True.
True: Ethernet is set to full-duplex.
False: Ethernet is set to half-duplex.
3-4 _Enet.Config.IPAddrMode IP Address Assignment Mode
Specifies how the RMC obtains its IP address.
0: Statically Assigned
1: BOOTP
2: DHCP
5 _Enet.Config.LockIP Lock IP Settings
True: IP address settings cannot be changed via
Ethernet.
False: IP address settings can be changed via
Ethernet.
6 _Enet.Config.LockFW Lock Firmware Update via Ethernet
True: Firmware cannot be updated via Ethernet.
False: Firmware can be updated via Ethernet.
9.2.3.3. Controlling Connection Status
Type: Communications Register
RMC70 Address: %MD21.23. See Register Map topic for other address formats.
RMC150
Address:
%MD45.23. See Register Map topic for other address formats.
System Tag: _Enet.CCStatus
deltamotion.com 1003