Renesas SH7781 User Manual
Page 927
19. Display Unit (DU)
Rev.1.00 Jan. 10, 2008 Page 897 of 1658
REJ09B0261-0100
Bit Bit
Name
Initial
Value R/W
Internal
Update Description
9, 8
PnCPSL
0
R/W
Yes
Plane n Color Palette Select
When the PnDDF bit is set to 8 bits/pixel,
specifies the color palette to be used.
00: Selects the color palette 1
01: Selects the color palette 2
10: Selects the color palette 3
11: Selects the color palette 4
7
PnDC
0
R/W
Yes
Plane n Display Area Change
Controls switching of the frame buffer in manual
display change mode.
0: In manual display change mode, switching of
the frame buffer for display is not performed.
1: In manual display change mode, switching of
the frame buffer for display is performed.
When the PnDC bit is 0, bit setting is possible.
Switching is performed in frame units.
After frame buffer switching (after vertical
blanking detection), this bit is cleared to 0.
6
⎯ 0
R
⎯ Reserved
This bit is always read as 0. The write value
should always be 0.
5, 4
PnBM
0
R/W
Yes
Plane n Buffer Mode
When set to manual display change mode or
auto display change mode (blinking mode),
double buffer control is performed using
PnDSA0R and PnDSA1R.
00: Manual display change mode
01: Setting prohibited
10: Auto display change mode (blinking mode)
11: Setting prohibited
3, 2
⎯ All
0
R
⎯ Reserved
These bits are always read as 0. The write value
should always be 0.
1, 0
PnDDF
0
R/W
Yes
Plane n Display Data Format
00: 8 bits/pixel
01: 16 bits/pixel
10: ARGB
11: YC (YUV422 is converted to RGB888)