Renesas SH7781 - Manual (Page 1024)

20. Graphics Data Translation Accelerator (GDTA)
Rev.1.00 Jan. 10, 2008 Page 994 of 1658
REJ09B0261-0100
20.3.15 CL Frame Width Setting Register (CLWR)
CLWR is in the CL register block and sets the input image width in pixel units.
16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 30
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯
BIt:
Initial value:
R/W:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 15 14
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
CL_W
⎯ ⎯ ⎯ ⎯
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W ⎯ ⎯ ⎯ ⎯
BIt:
Initial value:
R/W:
Bit Bit Name
Initial
Value R/W Description
31 to 12
⎯ All
0
⎯ Reserved
These bits are always read as 0. The write value should
always be 0.
11 to 0 CL_W All 0 R/W Frame width setting
Should be set in pixel units.
Value set should be 2 × n (n: an integer greater than 0)
Notes: 1. CL processing is prohibited when the setting is 0.
2. Addition is performed taking that 1 pixel = 1 byte.
3. CLWR (bytes) + CLIYPR (bytes) should be 32 bytes
× n (n: an integer greater than 0)
4. CLWR (bytes)/2 + CLUVPR (bytes) should be 32 bytes
× n (n: an integer greater than
0)