Renesas SH7781 - Manual (Page 163)

6. Floating-Point Unit (FPU)
Rev.1.00 Jan. 10, 2008 Page 133 of 1658
REJ09B0261-0100
6.3.2 Floating-Point Status/Control Register (FPSCR)
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 bit:
0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 Initial value:
R R R R R R R R R R R/W R/W R/W R/W R/W R/W R/W:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 bit:
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Initial value:
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W:
Enable (EN)
FR SZ PR DN
Flag RM Cause
Cause
Bit Bit Name
Initial
Value R/W
Description
31 to 22 — All 0 R Reserved
These bits are always read as 0. The write value should
always be 0.
21 FR 0 R/W Floating-Point Register Bank
0: FPR0_BANK0 to FPR15_BANK0 are assigned to
FR0 to FR15 and FPR0_BANK1 to FPR15_BANK1
are assigned to XF0 to XF15
1: FPR0_BANK0 to FPR15_BANK0 are assigned to
XF0 to XF15 and FPR0_BANK1 to FPR15_BANK1
are assigned to FR0 to FR15
20 SZ 0 R/W Transfer Size Mode
0: Data size of FMOV instruction is 32-bits
1: Data size of FMOV instruction is a 32-bit register
pair
(64 bits)
For relations between endian and the SZ and PR bits,
see figure 6.5.
19 PR 0 R/W Precision Mode
0: Floating-point instructions are executed as
single-precision
operations
1: Floating-point instructions are executed as
double-precision operations (graphics support
instructions are undefined)
For relations between endian and the SZ and PR bits,
see figure 6.5.
18 DN 1 R/W Denormalization Mode
0: Denormalized number is treated as such
1: Denormalized number is treated as zero