Renesas M16C FAMILY User Manual
User's manual, Usb flash writer
REJ10J0143-0401Z
USB Flash Writer
User's Manual
RENESAS SINGLE-CHIP MICROCOMPUTER
M16C FAMILY / 740 FAMILY
Rev.4.01
Renesas Solutions Corp.
Revision date: Dec 24, 2004
www.renesas.com
Table of contents
Document Outline
- 1. Contents of Product
- 2. Product Specifications
- 3. Installing
- 4. Using the FoUSB
- 5. Using the KD
- 5.1 Using the KD
- 5.1.1 Before Starting the KD
- 5.1.2 Starting the KD
- 5.1.3 Program Download
- 5.1.4 Program Execution
- 5.1.5 Program Stop
- 5.1.6 Program Step Execution
- 5.1.7 Software Break Method
- 5.1.8 Reset Execution
- 5.1.9 KD Completion
- 5.1.10 If a Communication Error Occurs
- 5.1.11 Error Except a Communication Error Occurs
- 5.1.12 Operation Method
- 5.2 KD Limitations
- 5.3 Memory Map Limitations
- 5.4 Peripheral Function Related Limitations
- 5.5 FoUSB Debugger Principle
- 5.1 Using the KD
- 6. Troubleshooting
- 6.1 FoUSB cannot communicate with the Target MCU Why?
- 6.2 The MCU cannot enter standerd serial I/O why?
- 6.3 The MCU cannot be programmed using FoUSB Why?
- 6.4 FoUSB cannot operate Why?
- 6.5 Can FoUSB information be transmitted to KD?
- 6.6 A communication error occurs when the KD starts. What is
- 6.7 A communication error occurred when debugging the progra
- 6.8 A message "Source file cannot be found" was output. What
- 6.9 Is peripheral I/O operating during a break?
- 6.10 Can coveragefunction be used in KD?
- 6.11 Can check sum function be used?
- 6.12 ID code written to microcomputer after KD exits?
- 6.13 Debug operation has not worked well
- 6.14 Message List
- 7. Appendix