Renesas SH7781 - Manual (Page 1214)

24. Multimedia Card Interface (MMCIF)
Rev.1.00 Jan. 10, 2008 Page 1184 of 1658
REJ09B0261-0100
Bit Bit Name
Initial
Value R/W Description
4 DTIE 0 R/W Data Transfer End Interrupt Flag Setting Enable
0: Disables data transfer end interrupt (disables DTI
flag setting).
1: Enables data transfer end interrupt (enables DTI flag
setting).
3 CRPIE 0 R/W Command Response Receive End Interrupt Flag
Setting Enable
0: Disables command response receive end interrupt
(disables CRPI flag setting).
1: Enables command response receive end interrupt
(enables CRPI flag setting).
2 CMDIE 0 R/W Command Transmit End Interrupt Flag Setting Enable
0: Disables command transmit end interrupt (disables
CMDI flag setting).
1: Enables command transmit end interrupt (enables
CMDI flag setting).
1 DBSYIE 0 R/W Data Busy End Interrupt Flag Setting Enable
0: Disables data busy end interrupt (disables DBSYI
flag setting).
1: Enables data busy end interrupt (enables DBSYI flag
setting).
0 BTIE 0 R/W Multiple block Transfer End Flag Setting Enable
0: Disables multiple block transfer end flag setting
1: Enables multiple block transfer end flag setting