Renesas SH7781 - Manual (Page 1454)

28. General Purpose I/O Ports (GPIO)
Rev.1.00 Jan. 10, 2008 Page 1424 of 1658
REJ09B0261-0100
28.2.23 Port G Data Register (PGDR)
PGDR is an 8-bit readable/writable register that stores port G data.
0 1 2 3 4 5 6 7
0 0 0 0 0 0 0 0
PG0DT PG1DT PG2DT PG3DT PG4DT PG5DT PG6DT PG7DT
R/W R/W R/W R/W R/W R/W R/W R/W
Bit:
Initial value:
R/W:
Bit Bit Name
Initial
value R/W Description
7 PG7DT 0 R/W
6 PG6DT 0 R/W
5 PG5DT 0 R/W
4 PG4DT 0 R/W
3 PG3DT 0 R/W
2 PG2DT 0 R/W
1 PG1DT 0 R/W
These bits store output data of a pin which is used as a
general-purpose output port. When the pin functions as
a general-purpose output port, reading the port will read
out the value of the corresponding bit of this register.
When the pin functions as a general-purpose input port,
reading the port will read out the status of the
corresponding pin.
0 PG0DT 0 R/W