Delta RMC101 - Manual (Page 97)

Using Plots 3.5
Using RMCWin 3-47
3.5.7 Saving and Restoring Plots
To save a plot, follow these steps:
1. Display the plot you wish to save.
2. On the File menu, click Save As.
3. In the File name box, enter the name of the file.
4. Click Save.
To view a previously saved plot, follow these steps:
1. Open a plot window. This may start loading a new plot from the RMC. It is not necessary to stop
the download before opening a saved plot.
2. On the File menu, click Open.
3. In the File name box, enter the name of the file.
4. Click Open.
3.5.8 Printing a Plot
Plots can be printed out; each will take a single page. The user can set the margins, decide
whether or not to print out the hairline with its detailed information, and choose to print in either
landscape or portrait modes.
To set the margins:
1. On the File menu, click Print Setup.
2. Under Margins, enter the sizes of the margins in the four text boxes. These settings are in
inches.
3. Click OK.
To print the hairline and the plot details at that time:
1. On the File menu, click Print Setup.
2. Select the Print hairline and plot details check box.
3. Click OK.
To select landscape or portrait modes:
1. On the File menu, click Print Setup.
2. Click Printer Setup.