Command area, Command area -2, 2 command area – Delta RMC101 User Manual

Page 52

Text mode
Original mode

RMC100 and RMCWin User Manual

3-2

• Plot Time area (top-right pane)

• Parameter area (bottom-right pane)

The following is a sample main screen:

3.2.2 Command Area

This area is located in the lower left portion of the main window. It holds the Command fields for
each axis. This area is updated only in Read-back Mode. Refer to the following sections for
details on the command fields:

Mode

Acceleration

Deceleration

Speed

Command Value

Command

To the right of each of the Command field labels are the values for the command fields for each
axis. You can change these values using the keyboard as described in Changing Data from the
Keyboard. Changes are not sent to the RMC until the COMMAND field itself is changed. At this
time, all six command fields are sent to the controller.

This manual is related to the following products:

RMC100