Delta RMC101 - Manual (Page 163)

Curve Tool 3.9
Using RMCWin 3-113
See Also: Curve Tool Topics
3.9.6.8 Curve Tool: Curve Properties and Editing Options
The General tab of the Options dialog box allows you to view or change curve properties and
editing options.
To view or change these options:
1. On the Tools menu, click Options.
2. Click the General tab.
3. Change any options on this page.
4. Click OK.
The General tab has the following settings:
• Axis Settings
This section has several settings for each axis. Axes that cannot have curves—such as axes that do
not exist in the current RMC configuration and auxiliary pressure axes—will be unavailable. The
following settings are available for each axis:
 Axis Labels (Time and Position)
Any text can be typed into these labels for Time and Position. These labels are used whenever
the curve tool refers to one of these dimensions. See Curve Axis Labels for details.
 Limits (Speed and Accel)
Each axis has a maximum speed and acceleration. Use these text boxes to change these limits.
For details on these values, see Curve Limits.
 Enhanced Curve
Use the check boxes in this column to select whether the curve on the given axis is Standard or
Enhanced. See Standard vs. Enhanced Curves for details.
 Auto Repeat
These checkboxes enable or disable the Auto Repeat feature for the curve on each axis. This
feature is only available for Enhanced curves. See Auto Repeat Curves for details.
• Editing Options
The following options apply to editing all curves:
 Enforce Axis Limits
Check this box to enforce extend, retract, velocity, acceleration, and time (or master position)
difference limits when editing curves in the Graph view. See Enforcing Limits for details.