F.2 general wiring information – Delta RMC101 User Manual
Page 928
RMC100 and RMCWin User Manual
F-4
• Stepper Specifications
• SSI Specifications
Digital I/O
See Digital I/O Specifications
Communication Modules
See the appropriate section(s):
• PROFIBUS-DP Module
• SERIAL Module
• Ethernet Module
• Modbus Plus Module
F.2 General Wiring Information
For CE compliance and to minimize electrical interference:
• Use twisted pairs for all wiring where possible.
• Use shielded cables for all wiring.
• Keep RMC wiring separate from AC mains or conductors carrying high currents, especially high
frequency switching power such as conductors between servo drives and motors or amplifiers
and proportional valves.
For UL and C-UL compliance:
• Power supply must be Class 2.
• All RMC inputs and outputs must be connected to Class 2 circuits only.