Curve tool: adding points, Curve tool: deleting points, 3 curve tool: adding points – Delta RMC101 User Manual

Page 172: 4 curve tool: deleting points

RMC100 and RMCWin User Manual

3-122

3.9.7.3 Curve Tool: Adding Points

To add a point to your curve, use one of the following methods. The keyboard method has the
advantage of allowing you to add points at a precise location. In any of these methods, it is
possible that adding a point at the requested location will be invalid. If this is the case, you will be
instructed why the request is invalid.

If you have the Link Curves Together option enabled, then adding a point on one axis will add a
point to all other visible curve. See Linking Curves for details and exceptions.

To add a point with the mouse in the Graph view:

1. Select the axis you want to add a point to, as described in Selecting the Active Axis.

2. Double-click at the location you want to add the point. A point will be added to the active curve at

this location.

To add a point with the shortcut menu in the Graph view:

1. Select the axis you want to add a point to, as described in Selecting the Active Axis.

2. Right-click at the location you want to add the point to display a shortcut menu.

3. On the shortcut menu, click Insert Point. A point will be added to the active curve at the location

that was clicked to display the shortcut menu.

To add a point using the keyboard:

1. Press the INSERT key.

This will display an Insert Point dialog box.

2. Select the axis you want to add the point to.

3. Type in Time (or master position) and Position values.

4. Click OK.

You can also add points using the Spreadsheet view, see Spreadsheet View and The Insertion
Point for details.