Drive, D.2.8 drive – Delta RMC101 User Manual

Page 882

Text mode
Original mode

RMC100 and RMCWin User Manual

D-20

* Can cause a Soft or Hard Stop if the corresponding bits are set in the Auto Stop field.

** Will cause either a Soft or Hard Stop depending how Auto Stop bits 5, 6, and 7 are set.

D.2.8 DRIVE

This field displays the drive output in millivolts. This field has a minimum value of 10,000,
representing full negative drive of -10,000 mV and a maximum value of +10,000, representing a
full positive drive of +10,000 mV. The value in this field is translated to the physical drive output

This manual is related to the following products:

RMC100