Drive, D.3.6 drive – Delta RMC101 User Manual

Page 889

Text mode
Original mode

Appendix D: Status Field Reference

D-27

* Can cause a Soft or Hard Stop if the corresponding bits are set in the Auto Stop field.

** Will cause either a Soft or Hard Stop depending how Auto Stop bits 5, 6, and 7 are set.

D.3.6 DRIVE

This field displays the drive output in millivolts. This field has a minimum value of 10,000,
representing full negative drive of -10,000 mV and a maximum value of +10,000, representing a
full positive drive of +10,000 mV. The value in this field is translated to the physical drive output

This manual is related to the following products:

RMC100