Delta RMC101 - Manual (Page 560)

RMC100 and RMCWin User Manual
6-16
1. On the Tools menu, click Module Configuration.
2. In the Slots list, click an analog module.
3. Click Slot Options.
4. In the Analog Channel Assignment dialog box, click the tab of the channel pair (0-1 or 2-3) you
wish to assign.
5. Click the option button of a channel assignment of either differential force control or auxiliary
differential force.
6. Click Update RMC.
7. The Update Module Configuration dialog box will be displayed to indicate the progress. If the
RMC could not be reset automatically, you may be prompted to reset it manually.
8. In the RMC Configuration dialog box, click Close.
Step 2: Configure the Analog Transducer Type for the Differential Force Input
Refer to Configuring the Analog Transducer Type for details on selecting a voltage or current input
type. Notice that both channels will be affected by this configuration.
Step 3: Set the Scale A, Offset A, Scale B, and Offset B Parameters for the Differential
Force Input
Refer to the individual field sections for details on setting these parameters. The first channel in the
pair is channel A, and the second channel is channel B.
Analog Input Ranges
See the COUNTS topic for detailed information on the maximum and minimum limits of the
various analog input ranges.
See also:
Analog Transducer Overview
Analog Transducer Wiring
Analog Transducer Configuration
Using Analog Channels as Position Inputs
Using Analog Channels as Velocity Inputs
Using Analog Channels as Pressure Inputs
6.1.8 Usage Details
6.1.8.1 Using Position and Velocity Joysticks
The analog module allows an external analog signal to act as the target of another axis. This is
used for joysticks controlling either position or velocity.