Delta RMC101 User Manual
Page 512
RMC100 and RMCWin User Manual
5-262
• Parity
Mitsubishi PLC Settings:
Set the QJ71C24 intelligent function module switches for the desired serial settings. The serial
settings on the Mitsubishi must match the settings on the RMC100. For details on the Mitsubishi
serial settings, see section 4.5.2 of the Mitsubishi manual: Q Corresponding Serial Communication
Module (User’s Manual).
The sample GX Developer program RMCBIDIR should be used as a starting point for any Mitsubishi
Q program using a RMC Serial module.
Sample Program
Delta has provided a sample GX Developer program (created with version 8.25B) called
RMCBIDIR, available on the Downloads page of Delta's website at www.deltamotion.com. This
program should be used as a starting point for any Mitsubishi Q program using a RMC Serial
module.
Protocol Description
This protocol requires that the PLC program uses the BIDOUT and BIDIN instructions. A detailed
explanation is found in the following Mitsubishi manual: Q Corresponding Serial Communication
Module (User’s Manual).
BIDOUT Instruction: