Delta RMC101 - Manual (Page 115)

LCD Screen Editor 3.8
Using RMCWin 3-65
Editable area
Click to clear or select the Editable check box to change whether a field is editable or read only.
This area is unavailable to fields that must be read only, such as status fields.
For editable integer fields, you also need to enter the range of values that can be entered in a
field. Enter these values with the decimal places you have specified. For example, if you want the
user to be limited to entering position units between 4000 and 8000, but this field is displayed with
three decimal places, then enter limits of 4.000 and 8.000.
When an LCD420 user tries to enter a value outside of the edit limits, the value will not be used,
and instead an error message will be displayed instructing the user of the field's limits. For
example:
See Also: LCD Screen Editor Topics
3.8.2.7 LCD Screen Editor: Toolbar Details
The toolbar holds buttons for commonly used commands. To help identify these buttons, hover
the pointer over a button. A ToolTip will pop up and a description will be displayed on the status
bar. To show or hide the toolbar, on the View menu, click Toolbar.
The following table shows each toolbar button and the corresponding command issued:
Command Equivalent Menu Action
New On the File menu, click New.
Open On the File menu, click Open.
Save On the File menu, click Save.
Cut On the Edit menu, click Cut.
Copy On the Edit menu, click Copy.
Paste On the Edit menu, click Paste.
Delete On the Edit menu, click Delete.
Upload from
Module On the Online menu, click Upload from
Motion Controller
.