Delta RMC101 - Manual (Page 608)

RMC100 and RMCWin User Manual
6-64
Resolver Overview
Resolver LED Indicators
Resolver Wiring
Resolver Scaling
Resolver Specifications
Rotational Mode
6.5.4 Resolver LED Indicators
The two LEDs above the Drive connector on the RMC’s Resolver interface card are axis status
LEDs. These LEDs will reflect the operational status of their corresponding axis according to the
following table.
LED Action Axis Status
Continuous Red No Transducer
Alternating Red/Green The above error has not occurred,
and one or more of the below
errors have occurred and are
enabled in the Auto Stop:
Overdrive Error
Parameter Error
Position Overflow
Integrator Windup
Following Error
Continuous Green Status good. None of the above
are true.
See also:
Resolver Overview
Resolver Configuration
Resolver Wiring
Resolver Specifications
Resolver Scaling
6.5.5 Resolver Specifications
For general specifications on the RMC, see RMC100 Specifications.