HP StorageWorks XP Remote Web Console Software Instruction Manuals and User Guides
We have 108 Instruction Manuals and User Guides for StorageWorks XP Remote Web Console Software HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 154 |
| Size: | 2.46 MB |
Show table of contents
Document Outline
- Contents
- About this guide
- 1 Continuous Access XP Journal
- Overview of copy solutions
- Overview of Continuous Access XP Journal
- Functionality
- Components
- Figure 2 Continuous Access XP Journal components
- Figure 3 Connection configuration for multiple secondary disk arrays
- Local disk arrays
- Main and remote control units (primary and secondary disk arrays)
- Journal groups
- Data volume pairs
- Journal volumes
- Consistency groups
- Remote copy connections
- Initiator ports and RCU target ports
- Continuous Access XP Journal Graphical User Interface
- Host failover software
- Remote copy operations
- Journal group operations
- Continuous Access XP Journal data volume pair status
- Continuous Access XP Journal operations requirements and restrictions
- System requirements
- One-to-one volume copy operations
- Logical unit (LU) types
- Journal groups
- Accessing Continuous Access XP Journal primary and secondary data volumes
- Cache and nonvolatile storage (NVS)
- Duplicate volumes
- Port configurations
- Installing hardware
- Enabling Continuous Access XP Journal options
- Planning for journal volumes
- Considerations
- Planning process
- Factors that determine the data transfer speed between the primary and secondary disk arrays
- Configuring primary and secondary disk arrays for Continuous Access XP Journal operations
- Combining Continuous Access XP Journal with other data management functions
- Table 18 Whether non-Continuous Access XP Journal volumes can be used as Continuous Access XP Journal volumes
- Combining Continuous Access XP Journal with Virtual LUN
- Combining Continuous Access XP Journal with Cache LUN XP
- Combining Continuous Access XP Journal with LUN Manager
- Combining Continuous Access XP Journal and Performance Control XP
- Combining Continuous Access XP Journal and Business Copy XP
- Table 19 Host pair status reporting for Continuous Access XP Journal/Business Copy XP shared volumes
- Table 20 Data currency of a shared Continuous Access XP Journal/Business Copy XP volume
- Figure 14 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 15 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 16 Shared Continuous Access XP Journal primary data volume and Business Copy XP P-VOL, and Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 17 Business Copy XP S-VOL in PSUS status functioning as Continuous Access XP Journal primary data volume
- Figure 18 Restoring Business Copy XP P-VOLs, step 1
- Figure 19 Restoring Business Copy XP P-VOLs, step 2
- Figure 20 Restoring Business Copy XP P-VOLs, step 3
- Figure 21 Restoring Business Copy XP P-VOLs, step 4
- Figure 22 Restoring Business Copy XP P-VOLs, step 5
- Figure 23 Restoring Business Copy XP P-VOLs, step 6
- Figure 24 Restoring Business Copy XP P-VOLs, step 7
- Figure 25 Restoring Business Copy XP P-VOLs, step 8
- Figure 26 Restoring Business Copy XP P-VOLs, step 9
- Combining Continuous Access XP Journal with Continuous Access XP (3DC cascading configuration)
- Combining Continuous Access XP Journal with Continuous Access XP Synchronous (3DC multi-target configuration)
- Figure 29 3DC multi-target configuration (combining Continuous Access XP Journal with Continuous Access XP Synchronous)
- Hardware configurations
- Setup procedure
- Recovering from primary site failures
- Changing to 3DC multi-target configurations after recovering from primary site failures
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC multi-target configurations)
- Recovering from primary site and Continuous Access XP Synchronous secondary site failures
- Transferring business tasks from Continuous Access XP Journal secondary sites to primary sites
- Combining Continuous Access XP Journal and LUN Security XP Extension
- Configuring disk arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote disk arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and disk arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary disk arrays
- Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- Performing Continuous Access XP Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- Monitoring remote copy operations
- Viewing history of data volume pair operations
- Performing optional operations
- Disaster recovery operations
- Troubleshooting
- Power management for disk arrays and network relay devices
- Pinned track recovery for Continuous Access XP Journal volumes
- SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 181 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 252 |
| Size: | 2.37 MB |
Show table of contents
Document Outline
- Hitachi Universal Replicator™ for Mainframe User Guide
- Contents
- 1 Overview of Universal Replicator for Mainframe
- 2 About Universal Replicator for Mainframe Operations
- Functionality Overview
- Components
- Remote Copy Operations
- Journal Processing
- Universal Replicator for Mainframe Delta Resync Operation
- Journal Obtain in TrueCopy for Mainframe Synchronous Secondary Site
- Switching the Master Journal Group of Universal Replicator for Mainframe
- Pair Status
- XP for Business Continuity Manager Software Support
- 3 Preparing for Universal Replicator for Mainframe Operations
- Requirements and Restrictions for Universal Replicator for Mainframe
- Installing the Hardware
- Enabling the Universal Replicator for Mainframe Option(s)
- Using Multiple Primary and Secondary Storage Systems
- Interoperability with Other Products and Functions
- Virtual LVI
- Cache Residency Manager
- ShadowImage for Mainframe
- Using the At-Time Split Function When Combining Universal Replicator for Mainframe with ShadowImage for Mainframe
- TrueCopy for Mainframe Synchronous (3DC Cascading Configuration)
- TrueCopy for Mainframe Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating Universal Replicator for Mainframe Pair for the Delta Resync Operation
- Requirements for Performing a Delta Resync Operation
- Configuring Delta Resync Operation Environment to Support Remote Command Devices
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from TrueCopy for Mainframe Secondary Site to the Primary Site (When the Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures in the Primary Site and the TrueCopy for Mainframe Synchronous Secondary Site
- Transferring Business Tasks from the Universal Replicator for Mainframe Secondary Site to the Primary Site
- XP Auto LUN
- Compatible FlashCopy V2
- Planning for Journal Volumes
- Contributing Factors for the Data Transfer Speed between Storage Systems
- Configuration where XP12000/XP10000 and XP24000/XP20000 Disk Arrays are Connected
- 4 Using the Universal Replicator for Mainframe GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing Storage System and Logical Paths
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing SIMs
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 6 Configuring Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Using Extended Consistency Groups
- 8 Performing Pair Operations
- Filtering Information in the List in the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Saving Pair Status Information into a Text File
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Releasing a Pair of Data Volumes
- Recovering a Pinned Track
- 9 Using Spreadsheets for Universal Replicator for Mainframe Operations
- 10 Usage Monitor Window Operations
- 11 Usage Scenarios
- Creating a Point-in-Time Copy of Data Volumes
- Performing Disaster Recovery Operations
- Preparing for Disaster Recovery Operations
- File and Database Recovery Procedures
- Switching Operations to the Secondary Site
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Disaster Recovery in a 3DC Cascading Configuration
- Recovering from a Disaster at the Main Site in a 3DC Multi-Target Configuration
- Recovering from Failures in the Primary Site (When the Delta Resync Operation is Performed)
- 12 Troubleshooting
- 13 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 186 |
| Size: | 3.09 MB |
Show table of contents
Document Outline
- XP Remote Web Console User Guide
- Contents
- 1 Overview of XP Remote Web Console Operations
- 2 Installation Requirements and Procedures
- Prerequisites
- System Requirements
- Setting up the XP Remote Web Console
- Using the XP Remote Web Console
- Starting Up and Logging on to the XP Remote Web Console
- View Mode and Modify Mode
- License Keys
- Enabling and Disabling Options on the XP Remote Web Console
- Allocating Licensed Capacity among Storage Logical Partitions
- 3 Performing XP Remote Web Console Operations
- Supported Storage Platforms and Firmware
- XP Remote Web Console Main Panel
- Identity Tab on the XP Remote Web Console Main Panel
- System Tab on the XP Remote Web Console Main Pane
- XP Remote Web Console Main Panel, Status Tab
- Setting User Accounts (Account Pane)
- Registering New User Accounts
- Changing the Password of User Accounts
- Changing Operation Authority of User Account
- Deleting User Account
- Basic Information Display Pane
- Downloading the Audit Log File
- Checking the Audit Log Using the Syslog Server (Syslog Pane)
- Control Panel
- Setting the XP Remote Web Console Environment Parameters (Set Env. Panel)
- Downloading the Configuration Files (Download Panel)
- Restoring Backups of Configuration Files (Restore Panel)
- Extending Cache Memory and LUs Using the On-Demand Storage Functions
- Downloading Trace Files Using the FD Dump Tool
- 4 Setting SNMP Agent Properties
- 5 SSL Encrypted Communication
- 6 Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 911 KB |
Show table of contents
Document Outline
- Contents
- Auto LUN XP for the XP128/XP1024
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Auto LUN/Performance Control Base Monitor for the XP128/XP1024
- Auto LUN statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 203 |
| Size: | 4.80 MB |
Show table of contents
Document Outline
- Hitachi Universal Replicator™ for z/OS User Guide
- Contents
- 1 Overview of Universal Replicator for z/OS
- 2 Overview of Universal Replicator for Mainframe Operations
- Overview of URz Functionality
- URz Components
- Remote Copy Operations
- Journal Processing
- Journal Group Operations
- URz Delta Resync Operation
- URz Data Volume Pair Status
- Business Continuity Manager Support
- 3 Requirements and Restrictions for Universal Replicator z/OS Operations
- System Requirements
- Requirements and Restrictions for URz
- Installing the Hardware
- Enabling the URz Option(s)
- Planning of Journal Volumes
- Configuring the Primary and Secondary Storage Systems
- Using More Than One Primary and Secondary Storage System for Remote Console
- Basic Behavior
- Hardware Configuration (When More Than One Primary and Secondary Storage System are Used)
- Setup Procedure (When More Than One Primary and Secondary Subsystem are Used)
- Extended Consistency Groups
- Connections Among Secondary Storage Systems
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Combining URz with Other Data Management Operations
- Combining URz with XP Cache LUN Software
- Combining URz with Cache Residency Manager
- Combining URz and ShadowImage for z/OS
- Using At-Time Split Function When Combining URz with ShadowImage for z/OS
- Combining URz with TCz Synchronous (3DC Cascading Configuration)
- Combining URz with TCz Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating URz Pair for Delta Resync Operation
- Requirements for Performing Delta Resync Operation
- Recovering from Failures in the Primary Site
- Recovering from Failures in the Primary Site
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from TCz Secondary Site to the Primary Site
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Multi-target Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site
- Recovering from Failures in the Primary Site and the TCz Synchronous Secondary Site
- Transferring Business Tasks from the URz Secondary Site to the Primary Site
- 4 Configuring Disk Storage Systems and Logical Paths
- DKC Operation Window
- Configuring Port Attributes
- Associating the Primary and the Remote Storage Systems and Configuring Logical Paths (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Deleting Logical Paths
- Viewing the Status of Logical Paths
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 5 Using Journal Groups
- Displaying the Journal Operation Window
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Forcibly Removing Journal Groups from an Extended Consistency Group
- 6 Performing URz Pair Operations
- Displaying the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Deleting a Pair of Data Volumes
- Creating a Point-in-Time Copy of Data Volumes
- 7 Monitoring Remote Copy Operations
- 8 Viewing History of Data Volume Pair Operations
- 9 Performing Optional Operations
- 10 Using Extended Consistency Groups
- 11 Disaster Recovery Operations
- 12 Troubleshooting
- 13 Support and Other Resources
- A Managing Power for Storage Systems and Network Relay Devices
- B Recovering a Pinned Track
- C Checking Service Information Messages (SIMs)
- D Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 220 |
| Size: | 5.97 MB |
Show table of contents
Document Outline
- About this guide
- 1 Overview of LUN Manager
- 2 Preparing to use LUN Manager
- 3 LUN Manager panes
- 4 LUN Manager operations
- 5 Troubleshooting LUN Manager
- 6 Finding an open-system host's World Wide Name (WWN)
- 7 Overview of Volume Manager and Custom Colume Size
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- 10 Custom Colume Size Operations
- 11 Troubleshooting Volume Manager and Custom Volume Size
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 62 |
| Size: | 1.03 MB |
Show table of contents
Document Outline
- About this guide
- Contents
- 1 Snapshot XP
- Overview
- Snapshot XP functions
- Snapshot XP operations
- Using Snapshot XP
- Snapshot XP operations
- Displaying the Business Copy XP main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating Snapshot XP pairs
- Storing snapshot data
- Restoring Snapshot XP pairs
- Deleting snapshot data
- Deleting Snapshot XP pairs
- Displaying detailed information about Snapshot XP pairs
- Displaying operation history
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 106 |
| Size: | 1.95 MB |
Show table of contents
Document Outline
- Contents
- About this guide
- 1 External Storage XP for the XP10000/XP12000
- Mapping
- Alternate paths
- Figure 2 Example of alternate path settings
- Figure 3 Example of alternate path configuration using two switches
- Figure 4 Example of incorrect alternate path configurations
- Examples of switching I/O execution paths to alternate paths
- External Storage XP uses
- Combining External Storage XP with other HP StorageWorks products
- Requirements and restrictions
- System requirements
- Storage devices that can be connected as external disk arrays
- Fibre Channel switches supported
- External Storage XP requirements
- Limitations concerning External Storage XP operations
- Preparing for External Storage XP operations
- External Storage XP operations
- Configuring external LUs
- Overview of steps required to define external LUs
- Configuring external disk array LUs, host mode, and ports
- Setting port attributes on the local disk arrays
- Mapping external LUs
- Setting alternate paths on each external LU
- Checking External Storage XP volume status (LDEV Information)
- Disconnecting external disk arrays or external LUs
- Checking connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Deleting external LU mappings (Delete LU)
- ”Alternate paths” on page 12Remote command devices
- Troubleshooting External Storage XP
- System parameter for external disk arrays
- Required volume capacity for emulation types
- Description for Characteristic2
- Adjusting volume capacity for copy pair setting
- Additional information about TagmaStore AMS, TagmaStore WMS, and Thunder 9500V Series subsystems
- A Using XP12000 disk arrays with EVA GL disk arrays attached as subordinated external storage disk arrays
- Preface
- Configuration
- Configuring MSA1000/1500 as external disk arrays
- Recommendations
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 43 |
| Size: | 1.25 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Disk/Cache Partition User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 26 |
| Size: | 313 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 34 |
| Size: | 995 KB |
Show table of contents
Document Outline
- Contents
- About this guide
- Overview of LUN Security XP Extension
- Preparing for LUN Security XP Extension operations
- LUN Security XP Extension panes
- LUN Security XP Extension operations
- Changing logical volumes’ access attributes
- Modifying retention terms
- Prohibiting changes to Read/Write volumes after the retention term ends
- Protecting logical volumes against Continuous Access XP and Business Copy XP operations
- Protecting Read/Write logical volumes from Continuous Access XP and Business Copy XP operations
- Preventing Command View XP or XP Remote Web Console users from config. LU paths & cmd. devs.
- Setting VMA
- Deleting extents
- Viewing a list of logical volumes combined into a LUSE volume
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 198 |
| Size: | 3.47 MB |
Show table of contents
Document Outline
- HP StorageWorks LUN Configuration and Security Mnager XP user guide for the XP12000/XP10000/SVS200
- Contents
- About this guide
- Part 1: LUN Configuration and Security Manager XP - LUN Manager
- 1 Overview of LUN Manager
- Figure 1 Array integrating Fibre Channel, iSCSI, and NAS environments
- Configuring LU paths
- Configuring LUN security
- Configuring LUs for use by RAID Manager XP
- Fibre Channel ports
- Fibre Channel topologies
- Fibre Channel port addresses
- Data transfer speed for Fibre Channel ports
- Standard, High Speed, and Initiator/External MIX modes
- Figure 8 Ports in High Speed or Initiator/External MIX mode
- Table 3 Port serial numbers and names (4-port channel adapters)
- Table 4 Port serial numbers and names (8-port channel adapter)
- Table 5 Port serial numbers and names (16-port channel adapter)
- Table 6 Port serial numbers and names (XP10000/SVS200)
- iSCSI port and iSNS server settings
- Status of connections between hosts and the array
- User authentication (Fibre Channel environments)
- User authentication (iSCSI environments)
- NAS channel adapters
- 2 Preparing to use LUN Manager
- 3 LUN Manager panes
- LUN Manager pane
- Port pane
- Authentication pane
- Figure 30 Authentication pane (Fibre folder selected)
- Figure 31 Authentication pane (port icon under Fibre folder selected)
- Figure 32 Authentication pane (icon under iSCSI folder selected)
- Port tree
- Port Information list
- FC Switch Information list
- Authentication information (Target) list
- Authentication Information (Host) list
- Buttons
- 4 LUN Manager operations
- Starting LUN Manager
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Associating host groups or iSCSI targets to logical volumes
- Changing or viewing LU path settings
- Deleting LU paths
- Changing a host group’s name and host mode
- Changing an iSCSI target’s name and host mode
- Deleting host groups
- Deleting iSCSI targets
- Initializing host group 0 (zero)
- Initializing iSCSI target 0 (zero)
- Changing a host bus adapter’s WWN and nickname
- Changing a host bus adapter’s iSCSI name and nickname
- Deleting host bus adapters from host groups
- Deleting host bus adapters from iSCSI targets
- Deleting unneeded WWNs from the WWN name table
- Deleting (initializing) unneeded iSCSI names
- Viewing a list of concatenated parity groups
- Defining and viewing alternate paths
- Using LUN security
- Configuring arrays for using RAID Manager XP commands
- Configuring Fibre Channel ports
- Making settings on iSCSI ports and iSNS servers
- Checking the status of the connection between hosts and the array (iSCSI environments only)
- Setting user authentication (Fibre Channel environments)
- Enabling and disabling authentication of hosts in host groups
- Registering a host’s user information on a host group
- Changing a host’s user information (Fibre Channel environments)
- Deleting a host’s user information (Fibre Channel environments)
- Specifying a host group’s user information (when performing mutual authentication)
- Clearing a host group’s user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (Fibre Channel environments)
- Settings and connection results in authentication of Fibre Channel switches
- Specifying a Fibre Channel port’s information
- Registering a Fibre Channel port’s user information
- Registering a Fibre Channel switch’s user information
- Clearing a Fibre Channel switch’s user information
- Specifying a Fibre Channel switch’s authentication mode
- Specifying whether a Fibre Channel switch can perform authentication
- Setting user authentication (iSCSI environments)
- Enabling and disabling authentication of hosts on iSCSI targets
- Registering a host’s user information on an iSCSI target
- Changing a host’s user information
- Deleting a host’s user information (iSCSI environments)
- Specifying an iSCSI target’s user information (when performing mutual authentication)
- Clearing an iSCSI target’s user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (iSCSI environments)
- Operating NAS channel adapters
- 5 Troubleshooting LUN Manager
- 6 Finding an open-system host’s World Wide Name (WWN)
- 1 Overview of LUN Manager
- Part 2: LUN Configuration and Security Manager XP - Volume Manager
- 7 Overview of Volume Manager and Custom Volume Size
- Overview of Volume Manager
- Overview of Custom Volume Size
- CVS function
- Parity group configuration
- Volume to Space function
- Install CV function
- Volume Initialize and Make Volume functions
- SSID requirements
- Requirements for CU groups
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- Volume Manager panes
- Volume Manager operations
- 10 Custom Volume Size operations
- Custom Volume Size panes
- Customized Volume pane
- Volume to Space Confirmation pane
- Install CV pane (1)
- Install CV pane (2)
- Install CV pane (3)
- Install CV pane (4)
- Make Volume pane
- Make Volume pane (2)
- Make Volume pane (3)
- Make Volume pane (4)
- Volume Initialize pane (1)
- Volume Initialize pane (2)
- Volume Initialize pane (3)
- Concatenation List pane
- Format All pane
- Write to Control Blocks pane
- Performing Custom Volume Size operations
- Before starting CVS operations
- CVS operations
- Viewing current CVS configuration information
- Viewing concatenated parity groups
- Converting logical volumes to space
- Creating CVS volumes (Install CV operation)
- Deleting CVS volumes
- Converting CVs back to FVs (Volume Initialize operation)
- Re-creating CVs after initializing the VDEV (Make Volume operation)
- Formatting LDEVs
- Making external mainframe volumes usable
- Custom Volume Size panes
- 11 Troubleshooting Volume Manager and Custom Volume Size
- 7 Overview of Volume Manager and Custom Volume Size
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 105 |
| Size: | 4.50 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 LUN Manager User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- A Glossary, Acronyms, and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 626 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 174 |
| Size: | 2.59 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Remote Web Console User's Guide
- Table of Contents
- 1 About Remote Web Console Operations
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- Email Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- C Glossary, Acronyms, and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 234 |
| Size: | 3.85 MB |
Show table of contents
Document Outline
- About this guide
- 1 Overview of HP copy solutions
- 2 Overview of Continuous Access XP Journal
- 3 Continuous Access XP Journal operations requirements and restrictions
- 4 Configuring arrays and logical paths
- 5 Using journal groups
- 6 Performing Continuous Access XP Journal pair operations
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 Continuous Access XP Journal operations with NAS Blade
- 12 Troubleshooting
- 13 Power management for arrays and network relay devices
- 14 Pinned track recovery for Continuous Access XP Journal volumes
- 15 SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 36 |
| Size: | 800 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 100 |
| Size: | 1.31 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 176 |
| Size: | 4.17 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Continuous Access Software User Guide
- Contents
- 1 Overview of XP Continuous Access Software
- 2 About XP Continuous Access Operations
- XP Continuous Access Components
- XP Continuous Access Remote Copy Operations
- XP Continuous Access Asynchronous Recordset Operations
- XP Continuous Access Synchronous Consistency Group Operations
- XP Continuous Access Asynchronous Consistency Group Operations
- Pair Status
- Interoperability with Other Products and Functions
- 3 Preparing for XP Continuous Access Operations
- 4 Using the XP Continuous Access GUI
- 5 Performing XP Continuous Access Configuration Operations
- 6 Performing XP Continuous Access Pair Operations
- Preparing for XP Continuous Access Pair Operations
- Creating XP Continuous Access Pairs
- Changing Pair Options
- Viewing XP Continuous Access Pair Status
- Splitting XP Continuous Access Pairs
- Resynchronizing XP Continuous Access Pairs
- Releasing XP Continuous Access Pairs
- Powering Off/On XP Continuous Access Components
- Pinned Track Recovery for XP Continuous Access Volumes
- 7 Usage Scenarios
- Data Migration Using XP Continuous Access Synchronous
- Point-in-Time (PiT) Data Duplication Using XP Continuous Access Asynchronous
- Using XP Continuous Access for Disaster Recovery Operations
- Considering the P-VOL Fence Level Setting
- Setting the Fence Level
- Transferring Sense Information Between Sites
- File and Database Recovery Procedures
- Switching Operations to the Remote Site
- Analyzing the Currency of XP Continuous Access Synchronous S-VOLs
- Analyzing the Consistency of XP Continuous Access Asynchronous S-VOLs
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- 8 Troubleshooting
- 9 Support and Other Resources
- A XP Continuous Access Load Balancing and Sidefile Management and Control
- B Retention of Pair Consistency using the Consistency Group of the XP Continuous Access Synchronous
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 252 KB |
Show table of contents
Document Outline
- XP Data Shredder user guide
- 1 HP StorageWorks XP Data Shredder for the XP12000/XP10000 Disk Array
- 2 Support and other resources
| Recognized languages: | English |
|---|---|
| Pages: | 52 |
| Size: | 1.04 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Cache Residency Manager User Guide
- Contents
- 1 Overview of HP StorageWorks XP Cache Residency Manager
- 2 About Cache Residency Manager Operations
- 3 Preparing for Cache Residency Manager Operations
- Preparing Storage System and Remote Web Console Computers
- System Requirements
- Enabling the Cache Residency Option
- Launching Cache Residency
- Required Cache Size for Cache Residency
- Cache Residency Cache Extents
- Cache Residency Manager Restrictions
- HP StorageWorks XP Disk/Cache Partition Support Requirements
- 4 Using the Cache Residency Manager GUI
- 5 Performing Cache Residency Manager Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Device Types Other Than OPEN-V
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 180 |
| Size: | 1.37 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Continuous Access Software User Guide
- Contents
- 1 Overview of XP Continuous Access Software
- 2 About XP Continuous Access Operations
- XP Continuous Access Components
- XP Continuous Access Remote Copy Operations
- XP Continuous Access Asynchronous Recordset Operations
- XP Continuous Access Synchronous Consistency Group Operations
- XP Continuous Access Asynchronous Consistency Group Operations
- Pair Status
- Interoperability with Other Products and Functions
- 3 Preparing for XP Continuous Access Operations
- 4 Using the XP Continuous Access GUI
- 5 Performing XP Continuous Access Configuration Operations
- 6 Performing XP Continuous Access Pair Operations
- Preparing for XP Continuous Access Pair Operations
- Creating XP Continuous Access Pairs
- Changing Pair Options
- Viewing XP Continuous Access Pair Status
- Splitting XP Continuous Access Pairs
- Resynchronizing XP Continuous Access Pairs
- Releasing XP Continuous Access Pairs
- Powering Off/On XP Continuous Access Components
- Pinned Track Recovery for XP Continuous Access Volumes
- 7 Usage Scenarios
- Data Migration Using XP Continuous Access Synchronous
- Point-in-Time (PiT) Data Duplication Using XP Continuous Access Asynchronous
- Using XP Continuous Access for Disaster Recovery Operations
- Considering the P-VOL Fence Level Setting
- Setting the Fence Level
- Transferring Sense Information Between Sites
- File and Database Recovery Procedures
- Switching Operations to the Remote Site
- Analyzing the Currency of XP Continuous Access Synchronous S-VOLs
- Analyzing the Consistency of XP Continuous Access Asynchronous S-VOLs
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- 8 Troubleshooting
- 9 Support and Other Resources
- A XP Continuous Access Load Balancing and Sidefile Management and Control
- B Retention of Pair Consistency using the Consistency Group of the XP Continuous Access Synchronous
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 1.14 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Disk/Cache Partition User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Disk/Cache Partition Software
- 2 About Disk/Cache Partition
- 3 Preparing for XP Disk/Cache Partition Operations
- 4 Using the XP Disk/Cache Partition GUI
- 5 XP Disk/Cache Partition Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 116 |
| Size: | 1.75 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Snapshot User Guide
- Contents
- 1 Overview of HP XP Snapshot Software
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing XP Snapshot Data
- Storing XP Snapshot Data by Consistency Group with At-Time Snapshot Function
- Restoring XP Snapshot Pairs
- Deleting XP Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- 7 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 112 |
| Size: | 1.22 MB |
Show table of contents
Document Outline
- XP24000/XP20000 LUN Manager User Guide
- Contents
- 1 Overview of LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- Setting UUID
- Clearing the setting of UUID
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 101 |
| Size: | 1.47 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Virtual LVI/LUN (VLL) and Volume Shredder User Guide
- Contents
- 1 Overview of Virtual LVI/LUN and Volume Shredder
- 2 About Virtual LVI/LUN and Volume Shredder
- Overview of Virtual LVI/LUN
- Overview of LDEV Formatting
- Overview of Quick Formatting
- Overview of Configuring External Mainframe Volumes
- Overview of Volume Shredder
- 3 Preparing for Virtual LVI/LUN and Volume Shredder Operations
- 4 Using the Virtual LVI/LUN and Volume Shredder GUI
- Customized Volume Window
- Install CV Dialog Box (1)
- Install CV Dialog Box (2)
- Set SSID (Install CV) Dialog Box
- Install CV Dialog Box (4)
- Install CV Confirmation Dialog Box
- Make Volume Dialog Box (1)
- Make Volume Dialog Box (2)
- Set SSID (Make Volume) Dialog Box
- Make Volume Dialog Box (4)
- Make Volume Confirmation Dialog Box
- Volume Initialize Dialog Box (1)
- Volume Initialize (Set SSID) Dialog Box
- Volume Initialize Confirmation Dialog Box
- RAID Concatenation Dialog Box
- Format All Dialog Box
- Shredding Param. Dialog Box
- Shredding Complete Confirmation Dialog Box
- Shredding Data Output Dialog Box
- Select Progress Dialog Box
- System Disk Options Dialog Box
- 5 Performing Virtual LVI/LUN and Volume Shredder Operations
- Virtual LVI/LUN Operations
- Launching Virtual LVI/LUN
- Viewing Concatenated Parity Groups
- Converting Logical Volumes to Space
- Creating VLL Volumes (Install CV Function)
- Deleting VLL Volumes
- Converting CVs Back to FVs (Volume Initialize Operation)
- Re-creating the CVs After Initializing the VDEV (Make Volume Operation)
- Formatting the LDEVs
- Quick Formatting the LDEVs
- Making External Mainframe Volumes Usable
- Volume Shredder Operations (For Volumes Using Hard Disk)
- Virtual LVI/LUN Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 245 |
| Size: | 9.05 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 314 |
| Size: | 2.18 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 3.07 MB |
Show table of contents
Document Outline
- Contents
- 1 TrueCopy for the XP128/XP1024/XP10000/XP12000
- Other Data Duplication Features
- Overview of TrueCopy Operations
- Components
- Figure 1 TrueCopy components for serial (ESCON) connection
- Figure 2 TrueCopy components for Fibre Channel connection
- XP128/XP1024/XP10000/XP12000
- Control Units (MCUs and RCUs)
- CU Emulation Types
- Volume Pairs (M-VOLs and R-VOLs)
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Remote Control Ports (RCPs) and Local Control Ports (LCPs)
- Command View XP Management Station or XP Remote Web Console
- Asynchronous Consistency Groups
- Host I/O Time-Stamping Function
- Error Reporting Communications
- Remote Copy Operations
- TrueCopy Asynchronous Recordset Operations
- TrueCopy Asynchronous Consistency Group Operations
- TrueCopy Volume Pair Status
- PPRC Support
- Components
- Preparing for TrueCopy Operations
- System Requirements
- Requirements and Restrictions
- Installing the TrueCopy Hardware
- Installing the TrueCopy Software
- Configuring the MCUs and RCUs for TrueCopy Operations
- Combining TrueCopy with Other Data Management Operations
- Table 13 Requirements and restrictions for combining TrueCopy and HXRC
- Combining TrueCopy and ShadowImage
- Table 14 Host pair status reporting for TrueCopy/ShadowImage shared volumes
- Table 15 Data currency of a shared TrueCopy/ShadowImage volume
- Figure 21 TrueCopy and ShadowImage: shared M-VOL/S-VOL
- Figure 22 TrueCopy and ShadowImage: shared R-VOL/S-VOL
- Figure 23 TrueCopy and ShadowImage: shared M-VOL/S-VOL and R-VOL/S-VOL
- Figure 24 TrueCopy and ShadowImage: shared M-VOL/T-VOL
- Starting TrueCopy
- Performing TrueCopy Configuration Operations
- TrueCopy Main Window
- TrueCopy Main Window (Pair Operations Window)
- RCU Operations Window
- Asynchronous Operations Window
- Usage Monitor Window
- Script Operations Window
- History Window
- Other Operations Window
- RCU Operations
- To perform the RCU operations from the RCU Operations tab:
- Configuring the Host Interface Ports
- Viewing RCU Status (RCU Status)
- Registering an RCU (Add RCU)
- RCU Path Parameters
- Modifying RCU Options (Change RCU Option)
- Deleting an RCU (Delete RCU)
- Adding and Deleting Logical Paths for an RCU (Add Path and Delete Path)
- Adding and Deleting SSIDs for an RCU (Add SSID and Delete SSID)
- Modifying Parameters and Omitting Selected Settings
- Asynchronous Operations
- To perform the asynchronous operations:
- Viewing Consistency Group Status (CT Group Status)
- Adding Consistency Groups (Add CT Group)
- Modifying Consistency Group Options (CT Group Option)
- Deleting Consistency Groups (Delete CT Group)
- Asynchronous Copy Option
- Modifying Parameters and Omitting Consistency Groups
- Usage Monitor Operations
- Script Operations
- History Operations
- Other Operations
- Optimizing TrueCopy Operations and Disk Array Performance
- Discontinuing TrueCopy Operations
- Performing TrueCopy Pair Operations
- Preparing for TrueCopy Volume Pair Operations
- Common Procedure for TrueCopy Pair Operation
- Viewing the Status of TrueCopy Volume Pairs (Pair Status)
- Creating TrueCopy Volume Pairs (Add Pair)
- Suspending TrueCopy Pairs (Suspend Pair)
- Resuming TrueCopy Volume Pairs (Resume Pair)
- Deleting TrueCopy Volume Pairs (Delete Pair)
- Changing the Pair Options (Change Pair Option)
- ICKDSF Considerations for TrueCopy Volumes
- Using TrueCopy for Data Migration and Duplication
- Powering Off/On TrueCopy Components
- TrueCopy Disaster Recovery Operations
- Troubleshooting
- Using PPRC Commands for TrueCopy
- Overview of PPRC Commands
- Using PPRC TSO Commands with TrueCopy Asynchronous
- CGROUP (FREEZE/RUN) Support
- IEA494I and IEA491E Console Messages
- XP128/XP1024/XP10000/XP12000 Response Characteristics to Failure Conditions
- Pinned Track Recovery for TrueCopy Volumes
- SIM Reporting
- TrueCopy Scripting
- HXRC Device Blocking and Load Balancing
- Device Blocking Function
- Load Balancing Control
- Current Load Balancing Control
- New Load Balancing Control
- Figure 76 Combination 1: MODE 85,86 = ON,OFF; Threshold 1/2/3 = 30/40/50%
- Figure 77 Combination 2 (Default): MODE 85,86 = OFF,OFF; Threshold 1/2/3 = 40/50/60%
- Figure 78 Combination 3: MODE 85,86 = OFF,ON - Threshold 1/2/3 = 50/60/70%
- Figure 79 Combination 4: MODE 85,86 = ON,ON - Threshold 1/2/3 = 60/70/80%
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 75 |
| Size: | 1.52 MB |
Show table of contents
Document Outline
- XP24000/XP20000 for Compatible Parallel Access Volumes Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP for Compatible Parallel Access Volumes Software
- 2 About Compatible PAV Operations
- 3 Preparing for Compatible PAV Operations
- 4 Performing Compatible PAV Operations
- 5 Monitoring Compatible PAV Activities
- 6 Troubleshooting
- 7 Support and Other Resources
- A Using HCD to Define and View Storage System Logical Control Units and Compatible PAV Devices
- B Checking the WLM PAV Settings
- C Using Compatible Hyper PAV
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 230 |
| Size: | 2.25 MB |
Show table of contents
Document Outline
- Contents
- Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems
- Hitachi TrueCopy features
- Other data duplication Features
- Overview of TrueCopy operations
- Components
- Figure 1 TrueCopy components for serial (ESCON) connection
- Figure 2 TrueCopy components for Fibre Channel connection
- XP12000/XP10000 storage systems
- Control units (MCUs and RCUs)
- CU emulation types
- Volume pairs (M-VOLs and R-VOLs)
- Remote copy connections
- Initiator ports and RCU target ports
- Remote control ports (RCPs) and local control ports (LCPs)
- XP Command View Advanced Edition Software server or XP Remote Web Console
- Asynchronous consistency groups
- Host I/O time-stamping function
- Error reporting communications
- Remote copy operations
- TrueCopy Asynchronous recordset operations
- TrueCopy Asynchronous consistency group operations
- TrueCopy volume pair status
- PPRC support
- Components
- Preparing for TrueCopy operations
- System requirements
- Requirements and restrictions
- Installing the TrueCopy hardware
- Installing the TrueCopy software
- Configuring the MCUs and RCUs for TrueCopy operations
- Combining TrueCopy with other data management operations
- Table 15 Using Non-TC390 and Non-TC390A Volumes as TC390 and TC390A Volumes
- Table 16 Requirements and restrictions for combining TrueCopy and HXRC
- Combining TrueCopy and ShadowImage
- Table 17 Host pair status reporting for TrueCopy/ShadowImage shared volumes
- Table 18 Data currency of a shared TrueCopy/ShadowImage volume
- Figure 20 TrueCopy and ShadowImage: shared M-VOL/S-VOL
- Figure 21 TrueCopy and ShadowImage: shared R-VOL/S-VOL
- Figure 22 TrueCopy and ShadowImage: shared M-VOL/S-VOL and R-VOL/S-VOL
- Figure 23 TrueCopy and ShadowImage: shared M-VOL/T-VOL
- Combining TrueCopy for z/OS and Virtual LVI/LUN
- Combining TrueCopy for z/OS and Cache Residency Manager
- Combining TrueCopy for z/OS and XP Performance Control
- Combining TrueCopy for z/OS and XP External Storage Software
- Starting TrueCopy
- Performing TrueCopy configuration operations
- TrueCopy main window
- TrueCopy main window (Pair Operations window)
- RCU Operations window
- Asynchronous Operations window
- Usage Monitor window
- Script Operations window
- History window
- Other Operations window
- RCU operations
- To perform the RCU operations from the RCU Operations tab:
- Configuring the host interface ports
- Viewing RCU Status (RCU Status)
- Registering an RCU (Add RCU)
- RCU path parameters
- Modifying RCU options (Change RCU option)
- Deleting an RCU (Delete RCU)
- Adding and deleting logical paths for an RCU (Add Path and Delete Path)
- Adding and deleting SSIDs for an RCU (Add SSID and Delete SSID)
- Modifying parameters and omitting selected settings
- Asynchronous operations
- Usage Monitor operations
- Script operations
- History operations
- Other operations
- Optimizing TrueCopy operations and disk array performance
- Discontinuing TrueCopy operations
- Performing TrueCopy pair operations
- Preparing for TrueCopy volume pair operations
- Common procedure for TrueCopy pair operation
- Viewing the status of TrueCopy volume pairs (Pair Status)
- Creating TrueCopy volume pairs (Add Pair)
- Suspending TrueCopy pairs (Suspend Pair)
- Resuming TrueCopy volume pairs (Resume Pair)
- Deleting TrueCopy volume pairs (Delete Pair)
- Changing the pair options (Change Pair Option)
- ICKDSF considerations for TrueCopy volumes
- Using TrueCopy for data migration and duplication
- Powering off/on TrueCopy components
- TrueCopy disaster recovery operations
- Troubleshooting
- Using PPRC commands for TrueCopy
- Overview of PPRC commands
- Using PPRC TSO commands with TrueCopy Asynchronous
- CGROUP (FREEZE/RUN) support
- IEA494I and IEA491E console messages
- XP12000/XP10000 response characteristics to failure conditions
- Pinned track recovery for TrueCopy volumes
- SIM reporting
- TrueCopy scripting
- HXRC device blocking and load balancing
- Device blocking function
- Load balancing control
- Current load balancing control
- New load balancing control
- Figure 84 Combination 1: MODE 85,86 = ON,OFF; Threshold 1/2/3 = 30/40/50%
- Figure 85 Combination 2 (Default): MODE 85,86 = OFF,OFF; Threshold 1/2/3 = 40/50/60%
- Figure 86 Combination 3: MODE 85,86 = OFF,ON – Threshold 1/2/3 = 50/60/70%
- Figure 87 Combination 4: MODE 85,86 = ON,ON – Threshold 1/2/3 = 60/70/80%
- Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 68 |
| Size: | 1016 KB |
Show table of contents
Document Outline
- Contents
- Auto LUN XP for the XP12000/XP10000
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Selection of CU group
- Logical volumes
- Source volumes
- LUSE source volumes
- Target volumes
- Number of volumes
- Calculating the number of Auto LUN XP concurrent migration plans
- Auto migration planning
- Auto migration execution
- Manual migration execution
- Copy Threshold option
- Progress value
- Effects on other XP products
- Maintenance
- Auto migration parameters
- Powering off disk arrays
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Using RAID Manager for manual Auto LUN XP migrations
- Auto LUN/Performance Control Base Monitor
- Auto LUN XP statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 110 |
| Size: | 3.13 MB |
Show table of contents
Document Outline
| Recognized languages: | English |
|---|---|
| Pages: | 114 |
| Size: | 3.25 MB |
Show table of contents
Document Outline
- Hitachi ShadowImage™ for Mainframe User's Guide
- Contents
- 1 Overview of Hitachi ShadowImage™ for Mainframe
- 2 About ShadowImage for Mainframe Operations
- 3 Interoperability with other Products and Functions
- Virtual LVI
- Cache Residency Manager
- Volume Security
- Volume Retention Manager
- XP Auto LUN
- HP XP External Storage Software
- Hitachi TrueCopy™ for Mainframe
- XP Continuous Access Journal Software™ for Mainframe
- TrueCopy for Mainframe and Universal Replicator for Mainframe
- HP XP for Compatible Extended Remote Copy (XRC) Software
- Concurrent Copy
- 4 Preparing for ShadowImage for Mainframe Operations
- 5 Using the ShadowImage for Mainframe GUI
- 6 Performing ShadowImage for Mainframe Operations Using Remote Web Console
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Configuring CTGs
- Adding Pairs
- Splitting Pairs
- Using PPRC Commands to Split, Resynchronize, and Delete Pairs in a CTG
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operations History
- 7 Performing ShadowImage for Mainframe Pair Operations Using XP for Business Continuity Manager Software
- 8 Performing ShadowImage for Mainframe Pair Operations Using PPRC
- 9 Troubleshooting
- 10 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 92 |
| Size: | 1.06 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Thin Provisioning Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Thin Provisioning Software
- 2 About XP Thin Provisioning Operations
- 3 Preparing for XP Thin Provisioning Operations
- 4 Using the XP Thin Provisioning GUI
- Pool Window
- V-VOL Window
- XP Thin Provisioning Window
- New Pool Dialog Box
- Change Pool Information Dialog Box
- New V-VOL Group Dialog Box
- Create V-VOL Dialog Box (1)
- Create V-VOL Dialog Box (2)
- Create V-VOL Dialog Box (3)
- Create V-VOL Confirmation Dialog Box
- Connect Pool Dialog Box
- Change Threshold Dialog Box
- Associate V-VOL Groups with Pool Dialog Box
- Release V-VOL Groups from Pool Dialog Box
- Delete V-VOL Groups Dialog Box
- 5 Performing XP Thin Provisioning Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 44 |
| Size: | 530 KB |
Show table of contents
Document Outline
- XP24000/XP20000 Volume Retention Manager User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Volume Retention Manager
- 2 About Volume Retention Manager Operations
- 3 Preparing for Volume Retention Manager Operations
- 4 Using the Volume Retention Manager GUI
- 5 Performing Volume Retention Manager Operations
- 6 Volume Retention Manager Spreadsheets
- 7 Usage Scenarios
- 8 Troubleshooting
- 9 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 88 |
| Size: | 1.55 MB |
Show table of contents
Document Outline
- HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP1024/Xp128
- Contents
- About this guide
- 1 LUN Manager for the XP1024/XP128
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- iSCSI environments
- LUN Manager operations
- Starting LUN Manager
- LUN Manager main pane
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Figure 13 Add New WWN dialog box (Fibre Channel)
- Figure 14 Add New iSCSI Name dialog box (iSCSI)
- Figure 15 Add New WWN dialog box (when registering a host that has previously been connected to the disk array)
- Figure 16 Add New iSCSI Name dialog box (when registering a host that has previously been connected to the disk array)
- Associating host groups to logical volumes
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Making settings on iSCSI ports and iSNS servers
- Checking the status of connection between hosts and the disk array (iSCSI environment only)
- Setting user authentication (iSCSI environments only)
- Starting User Authentication Operations
- User Authentication tab
- Specifying whether to enable or disable host authentication on a port
- Registering user information of hosts on a port
- Changing user information of hosts
- Deleting user information of hosts
- Specifying user information of ports (when performing mutual authentication)
- Clearing user information of ports (when performing mutual authentication)
- Relationship between port settings and connection results
- Operational restrictions
- 2 Volume Management for the XP1024/XP128
- Volume Management (LU Size Expansion)
- Custom Volume Size (CVS)
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- CVS operations
- Starting CVS operations
- Customized volume pane
- Viewing CVS configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 33 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 34 Install CV pane (1) for other than OPEN-V
- Figure 35 Install CV pane (1) for OPEN-V after clicking Set
- Figure 36 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 37 Install CV pane (2)
- Figure 38 Select an LDEV number
- Figure 39 Setting the SSID
- Figure 40 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 87 |
| Size: | 1.46 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Thin Provisioning Software User Guide
- Contents
- 1 Overview of HP XP Thin Provisioning Software
- 2 About XP Thin Provisioning Operations
- 3 Preparing for XP Thin Provisioning Operations
- 4 Using the XP Thin Provisioning GUI
- Pool Window
- V-VOL Window
- XP Thin Provisioning Window
- New Pool Dialog Box
- Change Pool Information Dialog Box
- New V-VOL Group Dialog Box
- Create V-VOL Dialog Box (1)
- Create V-VOL Dialog Box (2)
- Create V-VOL Dialog Box (3)
- Create V-VOL Confirmation Dialog Box
- Connect Pool Dialog Box
- Change Threshold Dialog Box
- Associate V-VOL Groups with Pool Dialog Box
- Release V-VOL Groups from Pool Dialog Box
- Delete V-VOL Groups Dialog Box
- 5 Performing XP Thin Provisioning Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 66 |
| Size: | 2.11 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Thin Provisioning Software User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 252 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 422 KB |
Show table of contents
Document Outline
- Contents
- LUN Security XP Extension for the XP128/XP1024/XP10000/XP12000
- Assigning access attributes to logical volumes
- Restricting read and write operations
- Using LUN Security XP Extension with other products
- Starting LUN Security XP Extension
- Using LUN Security XP Extension
- Changing logical volumes’ access attributes
- Modifying retention terms
- Prohibiting changes to Read/Write volumes after the retention term ends
- Protecting logical volumes against Continuous Access XP and BC XP operations
- Preventing Command View XP or XP Remote Web Console users from configuring LU paths and command devices
- Setting VMA
- Viewing a list of logical volumes combined into a LUSE volume
- Troubleshooting LUN Security XP Extension
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 98 |
| Size: | 1.04 MB |
Show table of contents
Document Outline
- XP Business Copy User Guide
- 1 Business Copy XP (BC) for the Array
- Overview of BC operations
- BC components
- BC requirements for the array
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Cautions on using the XP10000
- Preparing for BC operations
- System requirements
- Preparing for BC operations
- Combining BC with other data management operations
- Combining BC and Continuous Access XP operations
- Combining BC and Continuous Access XP Journal operations
- Combining BC with LUN Security XP Extension
- Copying access attributes
- License capacity of LUN Security XP Extension
- Starting BC
- Performing BC operations
- Setting reserve attributes
- Resetting reserve attributes
- Creating BC pairs (Paircreate)
- Splitting BC pairs (Pairsplit)
- Resynchronizing BC pairs (Pairresync)
- Suspending BC pairs (Pairsplit-E)
- Deleting BC pairs (Pairsplit-S)
- Viewing BC pair status and history
- Setting BC options
- BC error codes
- Troubleshooting When Using XP RAID Manager
- Overview of BC operations
- 2 Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 164 |
| Size: | 3.35 MB |
Show table of contents
Document Outline
- HP StorageWorks External Storage XP user guide
- Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Figure 11 Example of external LU with 2 TB or less
- Figure 12 External LU capacity is larger than the specified emulation type’s basic capacity (OPEN-3 example)
- Figure 13 External LU capacity is smaller than the specified emulation type’s basic capacity
- Table 4 When external LU’s emulation type is OPEN
- Table 5 When external LU’s emulation type is for mainframes
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- Guidelines for using cache with external storage
- Determining, setting, or changing the external LU cache mode
- Partitioning cache for external storage
- Determining the number and size of needed partitions
- Creating Cache partitions
- Changing storage system modes
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array’s port
- Setting a local array’s port attributes
- Mapping external LUs (Add LU)
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU’s status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Stopping the use of paths to an external LU by specifying an external array’s WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array’s WWN (Check Paths)
- Changing an external array’s port setting
- Stopping the use of paths to an external LU by specifying a local array’s port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array’s port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and Thunder 9500V subsystem models
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and TagmaStore AMS and TagmaStore WMS subsystem models
- Relationship between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and the controller
- Path status and examples of recovery procedures (TagmaStore AMS and TagmaStore WMS subsystems)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Using an XP12000/XP10000/SVS200 with an EVA3000/5000 external storage
- E Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 149 |
| Size: | 3.76 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Remote Web Console User Guide
- Contents
- 1 About Remote Web Console Operations
- Overview of Remote Web Console
- Remote Web Console Features
- User Access Levels
- Overview of Audit Logs
- Overview of Configuration File Loader Operations
- Overview of SSL-Encrypted Communications
- Encryption Function Enhancement (Solution to the Year 2010 Encryption Problem)
- Single Sign-on from HP Systems Insight Manager
- Important Terms and Concepts
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- E-mail Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 263 |
| Size: | 2.00 MB |
Show table of contents
Document Outline
- Hitachi TrueCopy™ for Mainframe User Guide
- Contents
- 1 Overview of TrueCopy for Mainframe
- 2 About TrueCopy for Mainframe Operations
- TrueCopy for Mainframe Components
- Remote Copy Operations
- TrueCopy for Mainframe Async Recordset Operations
- TrueCopy Open/MF Consistency Group Operations
- TrueCopy for Mainframe Async Consistency Group Operations
- Pair Status
- Business Continuity Manager Support
- PPRC Support
- Interoperability with Other Products and Functions
- XP Auto LUN
- Restriction for Connecting with Former Models of Storage System
- 3 Preparing for TrueCopy for Mainframe Operations
- 4 Using TrueCopy for Mainframe GUI
- 5 Performing TrueCopy for Mainframe Configuration Operations
- 6 Performing TrueCopy for Mainframe Pair Operations
- Creating TrueCopy for Mainframe Pairs
- Changing Pair Options
- Viewing TrueCopy for Mainframe Pair Status
- Splitting TrueCopy for Mainframe Pairs
- Resynchronizing TrueCopy for Mainframe Pairs
- Releasing TrueCopy for Mainframe Pairs
- ICKDSF Considerations for TrueCopy for Mainframe Volumes
- Pinned Track Recovery for TrueCopy for Mainframe Volumes
- 7 TrueCopy for Mainframe Usage Scenarios
- 8 Troubleshooting
- 9 Support and Other Resources
- A Using PPRC Commands for TrueCopy for Mainframe
- B TrueCopy for Mainframe Scripting
- C TrueCopy for Mainframe Load Balancing and Sidefile Management and Control
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 2.41 MB |
Show table of contents
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 258 |
| Size: | 5.85 MB |
Show table of contents
Document Outline
- Hitachi TrueCopy™ for Mainframe User Guide
- Contents
- 1 Overview of TrueCopy for Mainframe
- 2 About TrueCopy for Mainframe Operations
- TrueCopy for Mainframe Components
- Remote Copy Operations
- TrueCopy for Mainframe Async Recordset Operations
- TrueCopy Open/MF Consistency Group Operations
- TrueCopy for Mainframe Async Consistency Group Operations
- Pair Status
- Business Continuity Manager Support
- PPRC Support
- Interoperability with Other Products and Functions
- XP Auto LUN
- Restriction for Connecting with Former Models of Storage System
- 3 Preparing for TrueCopy for Mainframe Operations
- 4 Using TrueCopy for Mainframe GUI
- 5 Performing TrueCopy for Mainframe Configuration Operations
- 6 Performing TrueCopy for Mainframe Pair Operations
- Creating TrueCopy for Mainframe Pairs
- Changing Pair Options
- Viewing TrueCopy for Mainframe Pair Status
- Splitting TrueCopy for Mainframe Pairs
- Resynchronizing TrueCopy for Mainframe Pairs
- Releasing TrueCopy for Mainframe Pairs
- ICKDSF Considerations for TrueCopy for Mainframe Volumes
- Pinned Track Recovery for TrueCopy for Mainframe Volumes
- 7 TrueCopy for Mainframe Usage Scenarios
- 8 Troubleshooting
- 9 Support and Other Resources
- A Using PPRC Commands for TrueCopy for Mainframe
- B TrueCopy for Mainframe Scripting
- C TrueCopy for Mainframe Load Balancing and Sidefile Management and Control
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 98 |
| Size: | 1.62 MB |
Show table of contents
Document Outline
- Contents
- LUN Manager for the XP128/XP1024
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- Configuring LU paths in a NAS environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- iSCSI environments
- LUN Manager operations
- Starting LUN Manager
- LUN Manager main pane
- Defining LU paths
- Creating host groups
- Registering hosts in host groups
- Figure 15 Add New WWN dialog box (Fibre Channel)
- Figure 16 Add New iSCSI Name dialog box (iSCSI)
- Figure 17 Add New WWN dialog box (when registering a host that has previously been connected to the disk array)
- Figure 18 Add New iSCSI Name dialog box (when registering a host that has previously been connected to the disk array)
- Associating host groups to logical volumes
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Making settings on iSCSI ports and iSNS servers
- Checking the status of connection between hosts and the disk array (iSCSI environment only)
- Setting user authentication (iSCSI environments only)
- Starting User Authentication Operations
- User Authentication tab
- Specifying whether to enable or disable host authentication on a port
- Registering user information of hosts on a port
- Changing user information of hosts
- Deleting user information of hosts
- Specifying user information of ports (when performing mutual authentication)
- Clearing user information of ports (when performing mutual authentication)
- Relationship between port settings and connection results
- Operational restrictions
- Volume Management for the XP128/XP1024
- Volume Management (LU Size Expansion)
- Volume Size Configuration (VSC)
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- VSC Operations
- Starting VSC operations
- Customized volume pane
- Viewing VSC configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 35 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 36 Install CV pane (1) for other than OPEN-V
- Figure 37 Install CV pane (1) for OPEN-V after clicking Set
- Figure 38 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 39 Install CV pane (2)
- Figure 40 Select an LDEV number
- Figure 41 Setting the SSID
- Figure 42 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 250 |
| Size: | 2.62 MB |
Show table of contents
Document Outline
- XP LUN Configuration and Security Manager User Guide
- 1 Overview of XP LUN Configuration and Security Manager Software
- Configuring LU paths
- Configuring XP Secure Manager
- Configuring LUs for use by RAID Manager XP
- Fibre Channel ports
- iSCSI port and iSNS server settings
- Status of connections between hosts and the array
- User authentication (Fibre Channel environments)
- User authentication (iSCSI environments)
- NAS channel adapters
- 2 Preparing to use XP LUN Configuration and Security Manager Software
- 3 XP LUN Configuration and Security Manager Software panes
- 4 XP LUN Configuration and Security Manager Software operations
- Starting XP LUN Configuration and Security Manager Software
- Defining LU paths
- Changing or viewing LU path settings
- Deleting LU paths
- Changing a host group's name and host mode
- Changing an iSCSI target's name and host mode
- Deleting host groups
- Deleting iSCSI targets
- Initializing host group 0 (zero)
- Initializing iSCSI target 0 (zero)
- Changing a host bus adapter's WWN and nickname
- Changing a host bus adapter's iSCSI name and nickname
- Deleting host bus adapters from host groups
- Deleting host bus adapters from iSCSI targets
- Deleting unneeded WWNs from the WWN name table
- Deleting (initializing) unneeded iSCSI names
- Viewing a list of concatenated parity groups
- Defining and viewing alternate paths
- Using XP Secure Manager
- Configuring arrays for using RAID Manager XP commands
- Configuring Fibre Channel ports
- Making settings on iSCSI ports and iSNS servers
- Checking the status of the connection between hosts and the array (iSCSI environments only)
- Setting user authentication (Fibre Channel environments)
- Enabling and disabling authentication of hosts in host groups
- Registering a host's user information on a host group
- Changing a host's user information (Fibre Channel environments)
- Deleting a host's user information (Fibre Channel environments)
- Specifying a host group's user information (when performing mutual authentication)
- Clearing a host group's user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (Fibre Channel environments)
- Settings and connection results in authentication of Fibre Channel switches
- Specifying a Fibre Channel port's information
- Registering a Fibre Channel port's user information
- Registering a Fibre Channel switch's user information
- Clearing a Fibre Channel switch's user information
- Specifying a Fibre Channel switch's authentication mode
- Specifying whether a Fibre Channel switch can perform authentication
- Setting user authentication (iSCSI environments)
- Enabling and disabling authentication of hosts on iSCSI targets
- Registering a host's user information on an iSCSI target
- Changing a host's user information
- Deleting a host's user information (iSCSI environments)
- Specifying an iSCSI target's user information (when performing mutual authentication)
- Clearing an iSCSI target's user information (when performing mutual authentication)
- Settings and connection results in authentication of hosts (iSCSI environments)
- Operating NAS channel adapters
- 5 Troubleshooting XP LUN Configuration and Security Manager Software
- 6 Finding an open-system host's World Wide Name (WWN)
- 7 Overview of Volume Manager and Custom Volume Size
- 8 Preparing to use Volume Manager or Custom Volume Size
- 9 Volume Manager operations
- Volume Manager panes
- Volume Manager operations
- 10 Custom Volume Size operations
- Custom Volume Size panes
- Customized Volume pane
- Volume to Space Confirmation pane
- Install CV pane (1)
- Install CV pane (2)
- Install CV pane (3)
- Install CV pane (4)
- Make Volume pane
- Make Volume pane (2)
- Make Volume pane (3)
- Make Volume pane (4)
- Volume Initialize pane (1)
- Volume Initialize pane (2)
- Volume Initialize pane (3)
- Concatenation List pane
- Format All pane
- Write to Control Blocks pane
- Performing Custom Volume Size operations
- Before starting CVS operations
- CVS operations
- Viewing current CVS configuration information
- Viewing concatenated parity groups
- Converting logical volumes to space
- Creating CVS volumes (Install CV operation)
- Deleting CVS volumes
- Converting CVs back to FVs (Volume Initialize operation)
- Re-creating CVs after initializing the VDEV (Make Volume operation)
- Formatting LDEVs
- Making external mainframe volumes usable
- Custom Volume Size panes
- 11 Troubleshooting Volume Manager and Custom Volume Size
- 12 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 4.18 MB |
Show table of contents
Document Outline
- XP24000/XP20000 LUN Manager User Guide
- Contents
- 1 Overview of LUN Manager Operations
- 2 About LUN Manager Operations
- 3 Preparing for LUN Manager Operations
- 4 Using the LUN Manager GUI
- 5 Performing LUN Manager Operations
- Launching LUN Manager for Fibre Channel Operations
- Defining Fibre Channel LU Paths
- Setting Fibre Channel Authentication
- Changing the Fibre Channel LU Path Settings
- Configuring Fibre Channel Ports
- Viewing a List of Concatenated Parity Groups
- Deleting LU Paths
- Defining and Viewing Alternate Paths
- Using LUN Security
- Configuring the Storage System for Using RAID Manager
- Setting UUID
- Clearing the setting of UUID
- 6 Performing LUN Manager Operations Using Configuration File Loader
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 122 |
| Size: | 2.14 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Snapshot User Guide
- Contents
- 1 Overview of HP StorageWorks XP Snapshot Software
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing XP Snapshot Data
- Storing XP Snapshot Data by Consistency Group with At-Time Snapshot Function
- Restoring XP Snapshot Pairs
- Deleting XP Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- 7 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 32 |
| Size: | 884 KB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Data Retention Utility User's Guide
- About this Guide
- 1 About HP StorageWorks XP Data Retention Utility Operations
- 2 Preparing for Data Retention Utility Operations
- 3 Using the Data Retention Utility GUI
- 4 Performing Data Retention Utility Operations
- Changing the Access Attributes
- Extending the Data Retention Term
- Prohibiting Changes to Read/Write Even When the Retention Term is Over (Enabling/Disabling the Expiration Lock Function)
- Protecting Logical Volumes Against Storage System Copy Operations (Setting the S-VOL Disable Function)
- Preventing Remote Web Console Users from Configuring LU Paths and Command Devices (Setting the Reserve Function)
- Viewing a List of Logical Volumes Combined into a LUSE Volume
- 5 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 1.06 MB |
Show table of contents
Document Outline
- HP StorageWorks XP Disk/Cache Partition user guide for XP12000/XP10000 Disk Arrays and SVS 200
| Recognized languages: | English |
|---|---|
| Pages: | 200 |
| Size: | 2.48 MB |
Show table of contents
Document Outline
- External Storage XP user guide for the XP12000, XP10000, SVS200
- Table of Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relation btw. ser. nums. in the Dev. list on LU Op. pane & Thunder 9500V subsys. mod.
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Rel. btw. ser. numbs. in Dev. list on the LU Op. pane & T-Stor. AMS & T-Stor. WMS subsys. mods.
- Relation btw. the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsys. and contr.
- Path status and examples of rec. proce. (TagmaStore AMS and TagmaStore WMS subsys.)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 116 |
| Size: | 3.34 MB |
Show table of contents
Document Outline
- 1 Overview of HP Solutions
- 2 Overview of Hitachi ShadowImage™ for z/OS Operations
- 3 Preparing for Hitachi ShadowImage™ for z/OS Operations
- 4 Performing Hitachi ShadowImage™ for z/OS Operations
- 5 Using PPRC Commands for Hitachi ShadowImage™ for z/OS
- 6 Using XP for Business Continuity Manager Software
- 7 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 79 |
| Size: | 1.29 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 90 |
| Size: | 1.20 MB |
Show table of contents
Document Outline
- Contents
- Performance Control XP
- Optimal performance of high-priority hosts
- Automatically disable upper limit control
- Overview of Performance Control XP procedures
- Notes on using Performance Control XP
- Performance Control XP restrictions
- Using Performance Control XP
- Starting Performance Control XP
- Performance Control pane
- Managing traffic between HBAs and ports
- Setting the priority of ports on disk arrays
- Measuring traffic between host bus adapters and ports for many-to-many connections
- Analyzing traffic statistics
- Setting upper limit values for traffic at non-prioritized ports or WWNs
- Setting thresholds
- Changing PFC names of host bus adapters (many-to-many connections only)
- Replacing host bus adapters (many-to-many connections only)
- Grouping host bus adapters
- Troubleshooting Auto LUN/Performance Control Base Monitor and Performance Control XP
- Performance Control Export Tool
- Overview of Auto LUN XP
- Exporting monitoring data to files
- Figure 17 Sample text file
- Files to be exported
- Table 2 Auto LUN XP panes and monitoring data that can be saved by the Export Tool
- Table 3 Files containing statistics about resource usage and write pending rates (continued)
- Table 4 Files containing statistics about parity, external volume, and V-VOL groups
- Table 5 Files containing statistics about logical volumes in parity, external volume, or V-VOL groups (continued)
- Table 6 Files containing statistics about ports
- Table 7 Files containing statistics about host bus adapters connected to ports
- Table 8 Files containing statistics about LU paths
- Table 9 Files containing statistics about SPM groups
- Table 10 Files containing statistics about host bus adapters belonging to SPM groups
- Table 11 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (in the whole disk array)
- Table 12 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at LU paths)
- Table 13 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at logical volumes controlled by a particular CU) (continued)
- Table 14 Files containing statistics about remote copy operations by Continuous Access XP and TrueCopy for z/OS (at CLPR)
- Table 15 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (in the whole disk array)
- Table 16 Files containing statistics about remote copy operations by Continuous Access XP and Universal for z/OS (at journal groups)
- Table 17 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (at LU paths)
- Table 18 Files containing statistics about remote copy operations by Continuous Access XP Journal and Universal Replicator for z/OS (at logical volumes controlled by a particular CU)
- Preparing for using the Export Tool
- Using the Export Tool
- Command reference
- Table 22 Subcommand list (continued)
- Command syntax
- The svpip subcommand
- The retry subcommand
- The login subcommand
- The show subcommand
- The group subcommand
- The shortrange subcommand
- The longrange subcommand
- The outpath subcommand
- The option subcommand
- The apply subcommand
- The set subcommand
- The help subcommand
- The java command for exporting data In files
- Troubleshooting the Export Tool
- Limitations for storage partition administrators
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 36 |
| Size: | 299 KB |
Show table of contents
Document Outline
- XP24000/XP20000 Database Validator User's Guide
- 1 Overview of HP Database Validator
- 2 About Database Validator Operations
- 3 Preparing for Database Validator Operations
- 4 Performing Database Validator Operations
- Starting Database Validator Operations
- Sample Implementation of Database Validator
- Implementing Database Validator on HP-UX Logical Volumes
- Creating the Database
- Error Detection and Recovery
- 5 Troubleshooting
- 6 Support and Other Resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 440 KB |
Show table of contents
Document Outline
- XP24000/XP20000 Data Retention Utility User Guide
- Contents
- 1 About XP Data Retention Utility Operations
- 2 Preparing for Data Retention Utility Operations
- 3 Using the Data Retention Utility GUI
- 4 Performing Data Retention Utility Operations
- Changing the Access Attributes
- Extending the Data Retention Term
- Prohibiting Changes to Read/Write Even When the Retention Term is Over (Enabling/Disabling the Expiration Lock Function)
- Protecting Logical Volumes Against Storage System Copy Operations (Setting the S-VOL Disable Function)
- Preventing Remote Web Console Users from Configuring LU Paths and Command Devices (Setting the Reserve Function)
- Viewing a List of Logical Volumes Combined into a LUSE Volume
- 5 Troubleshooting
- 6 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 82 |
| Size: | 2.96 MB |
Show table of contents
Document Outline
- HP StorageWorks XP 24000 Snapshot User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP Snapshot
- 2 About XP Snapshot Operations
- 3 Preparing for XP Snapshot Operations
- 4 Using the XP Snapshot GUI
- 5 Performing XP Snapshot Operations
- XP Snapshot Processes
- Configuring the Volume List
- Deleting the Settings in Preview List
- Creating or Deleting Pools
- Creating or Deleting Virtual Volumes
- Creating XP Snapshot Pairs
- Storing Snapshot Data
- Restoring XP Snapshot Pairs
- Deleting Snapshot Data
- Deleting XP Snapshot Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Displaying the Operation History
- 6 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 84 |
| Size: | 1.28 MB |
Show table of contents
Document Outline
- Contents
- LUN Manager for the XP10000/XP12000
- LU configuration overview
- Supported emulation types
- LU paths
- Configuring LU paths in a Fibre Channel environment
- 16-Port FC/CA CHIP product
- Host groups
- Host modes
- LUN Security
- RAID Manager command devices
- Fibre Channel port attributes
- LUN Manager operations
- Starting LUN Manager
- LUN Manager pane
- Defining LU paths
- Changing or viewing LU path settings
- Defining alternate paths
- Viewing alternate paths
- Deleting WWNs
- Applying and removing LUN security
- Creating RAID Manager Command Devices
- Port Operations
- Operational restrictions
- Volume Management for the XP10000/XP12000
- Volume Management (LU Size Expansion)
- Volume Size Configuration (VSC)
- VSC operations
- Parity group configuration
- Volume to Space operation
- Install Custom Volume (CV) operation
- Table 13 Creating VSC volumes by Install CV (for OPEN-V)
- Table 14 VSC supported emulations
- Table 15 Install Custom Volume operation parameters for mainframe and open system volumes
- Table 16 Capacities of open system custom volume sizes
- Calculating CV capacity for mainframe systems
- Calculating CV capacity for open systems
- Volume Initialize and Make Volume operations
- LUSE operations
- Starting LUSE operations
- Volume Management pane
- Viewing LUSE configuration information
- Viewing concatenated parity groups
- Creating a LUSE volume using the Volume Count list
- Creating a LUSE volume using the Select an LDEV list
- Creating a LUSE volume using the LDEV information table
- Releasing a LUSE volume
- Changing LUSE capacities
- Resetting an unregistered LUSE volume
- VSC Operations
- Starting VSC operations
- Customized Volume pane
- Viewing VSC configuration information
- Viewing concatenated parity groups
- Converting volumes to space (Volume to Space)
- Creating custom volumes (Install CV)
- Figure 23 Install CV pane (1) for OPEN-V (when two or more free spaces are available)
- Figure 24 Install CV pane (1) for other than OPEN-V
- Figure 25 Install CV pane (1) for OPEN-V after clicking Set
- Figure 26 Install CV pane (1) for other than OPEN-V after clicking Set
- Figure 27 Install CV pane (2)
- Figure 28 Select an LDEV number
- Figure 29 Setting the SSID
- Figure 30 Customized volume screen
- Deleting custom volumes (Volume to Space)
- Creating initial custom volumes for OPEN-V (Make Volume)
- Initializing custom volumes for other than OPEN-V (Volume Initialize)
- Formatting LDEVs
- Formatting all blocked volumes
- Writing to control blocks
- Making external mainframe volumes usable
- Operational restrictions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 65 |
| Size: | 988 KB |
Show table of contents
Document Outline
- Contents
- Auto LUN XP for the XP12000/XP10000
- Auto LUN XP features
- Auto LUN XP tasks
- Reserve volumes
- Volume migration
- Estimating usage rates
- Automatic migration
- Manual migration
- Requirements and restrictions
- Selection of CU group
- Logical volumes
- Source volumes
- LUSE source volumes
- Target volumes
- Number of volumes
- Calculating the number of Auto LUN XP concurrent migration plans
- Auto migration planning
- Auto migration execution
- Manual migration execution
- Copy Threshold option
- Progress value
- Effects on other XP products
- Maintenance
- Auto migration parameters
- Powering off disk arrays
- Starting Auto LUN XP
- Creating and executing migration plans
- Troubleshooting Auto LUN XP
- Using RAID Manager for manual Auto LUN XP migrations
- Auto LUN/Performance Control Base Monitor
- Auto LUN XP statistics
- Usage statistics
- Collecting usage statistics about disk array resources
- Viewing parity group usage statistics
- Viewing logical volume usage statistics
- Viewing channel adapter (CHA) usage statistics
- Viewing channel processor (CHP) usage statistics
- Viewing disk adapter (DKA) usage statistics
- Viewing disk processor (DKP) usage statistics
- Viewing data recovery and reconstruction processor (DRR) usage statistics
- Viewing write pending rates
- Viewing access path usage statistics
- Workload and traffic statistics
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 244 |
| Size: | 5.59 MB |
Show table of contents
Document Outline
- Hitachi Universal Replicator™ for Mainframe User Guide
- Contents
- 1 Overview of Universal Replicator for Mainframe
- 2 About Universal Replicator for Mainframe Operations
- Functionality Overview
- Components
- Remote Copy Operations
- Journal Processing
- Universal Replicator for Mainframe Delta Resync Operation
- Journal Obtain in TrueCopy for Mainframe Synchronous Secondary Site
- Switching the Master Journal Group of Universal Replicator for Mainframe
- Pair Status
- XP for Business Continuity Manager Software Support
- 3 Preparing for Universal Replicator for Mainframe Operations
- Requirements and Restrictions for Universal Replicator for Mainframe
- Installing the Hardware
- Enabling the Universal Replicator for Mainframe Option(s)
- Using Multiple Primary and Secondary Storage Systems
- Interoperability with Other Products and Functions
- Virtual LVI
- Cache Residency Manager
- ShadowImage for Mainframe
- Using the At-Time Split Function When Combining Universal Replicator for Mainframe with ShadowImage for Mainframe
- TrueCopy for Mainframe Synchronous (3DC Cascading Configuration)
- TrueCopy for Mainframe Synchronous (3DC Multi-target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating Universal Replicator for Mainframe Pair for the Delta Resync Operation
- Requirements for Performing a Delta Resync Operation
- Configuring Delta Resync Operation Environment to Support Remote Command Devices
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the TrueCopy for Mainframe Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from TrueCopy for Mainframe Secondary Site to the Primary Site (When the Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures in the Primary Site and the TrueCopy for Mainframe Synchronous Secondary Site
- Transferring Business Tasks from the Universal Replicator for Mainframe Secondary Site to the Primary Site
- XP Auto LUN
- Compatible FlashCopy V2
- Planning for Journal Volumes
- Contributing Factors for the Data Transfer Speed between Storage Systems
- Configuration where XP12000/XP10000 and XP24000/XP20000 Disk Arrays are Connected
- 4 Using the Universal Replicator for Mainframe GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing Storage System and Logical Paths
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing SIMs
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between the Primary and the Secondary Storage Systems
- 6 Configuring Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a Copy Operation)
- Restoring a Mirror (Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Using Extended Consistency Groups
- 8 Performing Pair Operations
- Filtering Information in the List in the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Saving Pair Status Information into a Text File
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Releasing a Pair of Data Volumes
- Recovering a Pinned Track
- 9 Using Spreadsheets for Universal Replicator for Mainframe Operations
- 10 Usage Monitor Window Operations
- 11 Usage Scenarios
- Creating a Point-in-Time Copy of Data Volumes
- Performing Disaster Recovery Operations
- Preparing for Disaster Recovery Operations
- File and Database Recovery Procedures
- Switching Operations to the Secondary Site
- Transferring Operations Back to the Primary Site
- Resuming Normal Operations at the Primary Site
- Disaster Recovery for Multiple Primary and Secondary Storage Systems
- Disaster Recovery in a 3DC Cascading Configuration
- Recovering from a Disaster at the Main Site in a 3DC Multi-Target Configuration
- Recovering from Failures in the Primary Site (When the Delta Resync Operation is Performed)
- 12 Troubleshooting
- 13 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 161 |
| Size: | 2.84 MB |
Show table of contents
Document Outline
- XP24000/XP20000 for FlashCopy Mirroring Software User Guide
- Contents
- 1 About Version 1 Operations
- 2 Preparing for Version 1 Operations
- 3 Using the Version 1 GUI
- 4 Performing Version 1 Operations
- 5 About Version 2 Operations
- How Version 2 Works
- Establishing a Version 2 Relationship
- Copy Modes
- Copying by Volume
- Copying by Dataset
- Using Consistency Groups for Dataset Copies that Span Volumes
- Incremental FlashCopy Function
- Reverse Restore Function
- Fast Reverse Restore Function
- FlashCopy to PPRC Primary Volume Function
- Remote FlashCopy Function
- FlashCopy to Universal Replicator for Mainframe Primary Volume Function
- Preserve Mirror FlashCopy Function
- Releasing Version 2 Relationships
- Interoperability With Other Products and Functions
- Optimization of Volumes
- 6 Preparing for Version 2 Operations
- 7 Using the Version 2 GUI
- 8 Performing Version 2 Operations
- Commands for Version 2 Operations
- Setting Options
- Establishing Version 2 Relationships
- Establishing Version 2 Relationships by Volumes Using TSO Command
- Establishing Version 2 Relationships by Volumes Using the DFSMSdss Command
- Establishing Version 2 Relationships by Volumes Using the ICKDSF Command
- Creating Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Creating Version 2 Pairs by Using Incremental FlashCopy (Reverse Restore): FLASHCPY ESTABLISH
- Establishing Version 2 Relationships by Volumes Using the ANTRQST Macro Command
- Establishing Version 2 Relationships by Extents Using the TSO Command
- Establishing Version 2 Relationships by Extents Using the DFSMSdss Command
- Establishing Version 2 Relationships by Extents Using the ANTRQST Macro Command
- Establishing Version 2 Relationships while Suspending Write Operations to S-VOLs
- Releasing a Version 2 Relationship
- Releasing a Version 2 Relationship Using the TSO Command
- Case 1: TDEVN Specified, DDSW = NO
- Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 3: SDEVN and TDEVN Specified, DDSW = NO
- Case 4 (a, b): SDEVN and TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 5: SDEVN and TDEVN Specified, DDSW = YES
- Case 6: SDEVN and TDEVN Specified, DDSW = YES, XTNTLST Parameter Specified
- Case 7: DEVN Specified, ACTION = THAW
- Releasing a Version 2 Relationship Using the ICKDSF Command
- Releasing a Version 2 Relationship Using the ANTRQST Macro Command
- Releasing a Version 2 Relationship Using the TSO Command
- Viewing Information for a Version 2 Relationship
- Viewing Relationship Status of Version 2 Using the TSO Command
- Viewing Relationship Status of Version 2 Using the ICKDSF Command
- Displaying Information on Version 2 Pairs: FLASHCPY QUERY
- Viewing Relationship Status of Version 2 Using the ANTRQST Macro Command
- Viewing Resource Information for Version 2 Using Remote Web Console
- Viewing the Number of Relationships and License Information for Version 2 Using Remote Web Console
- Viewing Operation History Using Remote Web Console
- 9 Comparison of Versions 1 and 2
- 10 Feature Comparison with the IBM Product
- 11 Troubleshooting
- 12 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 80 |
| Size: | 1.95 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Auto LUN Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Auto LUN Software
- 2 About XP Auto LUN Operations
- 3 Using the XP Auto LUN GUI
- 4 XP Auto LUN Operations
- 5 Using RAID Manager for Manual Volume Migration
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 96 |
| Size: | 4.38 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Business Copy Software User's Guide
- About this Guide
- 1 Overview of HP StorageWorks XP Business Copy Software
- 2 About Business Copy Operations
- 3 Preparing for Business Copy Operations
- 4 Using the Business Copy GUI
- 5 Performing Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 6 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 155 |
| Size: | 3.55 MB |
Show table of contents
Document Outline
- XP24000/XP20000 for FlashCopy Mirroring Software User Guide
- Contents
- 1 About Version 1 Operations
- 2 Preparing for Version 1 Operations
- 3 Using the Version 1 GUI
- 4 Performing Version 1 Operations
- 5 About Version 2 Operations
- How Version 2 Works
- Establishing a Version 2 Relationship
- Copy Modes
- Copying by Volume
- Copying by Dataset
- Using Consistency Groups for Dataset Copies that Span Volumes
- Incremental FlashCopy Function
- Reverse Restore Function
- Fast Reverse Restore Function
- FlashCopy to PPRC Primary Volume Function
- Remote FlashCopy Function
- FlashCopy to Universal Replicator for Mainframe Primary Volume Function
- Preserve Mirror FlashCopy Function
- Releasing Version 2 Relationships
- Interoperability With Other Products and Functions
- Optimization of Volumes
- 6 Preparing for Version 2 Operations
- 7 Using the Version 2 GUI
- 8 Performing Version 2 Operations
- Commands for Version 2 Operations
- Setting Options
- Establishing Version 2 Relationships
- Establishing Version 2 Relationships by Volumes Using TSO Command
- Establishing Version 2 Relationships by Volumes Using the DFSMSdss Command
- Establishing Version 2 Relationships by Volumes Using the ICKDSF Command
- Creating Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Creating Version 2 Pairs by Using Incremental FlashCopy (Reverse Restore): FLASHCPY ESTABLISH
- Establishing Version 2 Relationships by Volumes Using the ANTRQST Macro Command
- Establishing Version 2 Relationships by Extents Using the TSO Command
- Establishing Version 2 Relationships by Extents Using the DFSMSdss Command
- Establishing Version 2 Relationships by Extents Using the ANTRQST Macro Command
- Establishing Version 2 Relationships while Suspending Write Operations to S-VOLs
- Releasing a Version 2 Relationship
- Releasing a Version 2 Relationship Using the TSO Command
- Case 1: TDEVN Specified, DDSW = NO
- Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 3: SDEVN and TDEVN Specified, DDSW = NO
- Case 4 (a, b): SDEVN and TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
- Case 5: SDEVN and TDEVN Specified, DDSW = YES
- Case 6: SDEVN and TDEVN Specified, DDSW = YES, XTNTLST Parameter Specified
- Case 7: DEVN Specified, ACTION = THAW
- Releasing a Version 2 Relationship Using the ICKDSF Command
- Releasing a Version 2 Relationship Using the ANTRQST Macro Command
- Releasing a Version 2 Relationship Using the TSO Command
- Viewing Information for a Version 2 Relationship
- Viewing Relationship Status of Version 2 Using the TSO Command
- Viewing Relationship Status of Version 2 Using the ICKDSF Command
- Displaying Information on Version 2 Pairs: FLASHCPY QUERY
- Viewing Relationship Status of Version 2 Using the ANTRQST Macro Command
- Viewing Resource Information for Version 2 Using Remote Web Console
- Viewing the Number of Relationships and License Information for Version 2 Using Remote Web Console
- Viewing Operation History Using Remote Web Console
- 9 Comparison of Versions 1 and 2
- 10 Feature Comparison with the IBM Product
- 11 Troubleshooting
- 12 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 200 |
| Size: | 2.90 MB |
Show table of contents
Document Outline
- HP StorageWorks Continuous Access XP Journal user guide
- Contents
- About this guide
- 1 Overview of HP copy solutions
- 2 Overview of Continuous Access XP Journal
- Overview of functionality
- Components
- Figure 2 Continuous Access XP Journal components
- Figure 3 Connection configuration for multiple secondary arrays
- Local arrays
- Main and remote control units (primary and secondary arrays)
- Journal groups
- Data volume pairs
- Journal volumes
- Consistency groups
- Remote copy connections
- Initiator and RCU target ports
- Continuous Access XP Journal Graphical User Interface
- Host failover software
- Remote copy operations
- Journal processing
- Journal group operations
- Continuous Access XP Journal data volume pair status
- 3 Continuous Access XP Journal operations requirements and restrictions
- System requirements
- Requirements and Restrictions for Continuous Access XP Journal
- Installing hardware
- Enabling Continuous Access XP Journal options
- Planning for journal volumes
- Configuring primary and secondary arrays for Continuous Access XP Journal operations
- Combining Continuous Access XP Journal with other data management functions
- Table 18 Whether non-Continuous Access XP Journal volumes can be used as Continuous Access XP Journal volumes
- Combining Continuous Access XP Journal with Virtual LUN
- Combining Continuous Access XP Journal with Cache LUN XP
- Combining Continuous Access XP Journal with LUN Manager
- Combining Continuous Access XP Journal and Performance Control XP
- Combining Continuous Access XP Journal and Business Copy XP
- Table 19 Host pair status reporting for Continuous Access XP Journal/Business Copy XP shared volumes
- Table 20 Data currency of a shared Continuous Access XP Journal/Business Copy XP volume
- Figure 14 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 15 Shared Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 16 Shared Continuous Access XP Journal primary data volume and Business Copy XP P-VOL, and Continuous Access XP Journal secondary data volume and Business Copy XP P-VOL
- Figure 17 Business Copy XP S-VOL in PSUS status functioning as Continuous Access XP Journal primary data volume
- Figure 18 Restoring Business Copy XP P-VOLs, step 1
- Figure 19 Restoring Business Copy XP P-VOLs, step 2
- Figure 20 Restoring Business Copy XP P-VOLs, step 3
- Figure 21 Restoring Business Copy XP P-VOLs, step 4
- Figure 22 Restoring Business Copy XP P-VOLs, step 5
- Figure 23 Restoring Business Copy XP P-VOLs, step 6
- Figure 24 Restoring Business Copy XP P-VOLs, step 7
- Figure 25 Restoring Business Copy XP P-VOLs, step 8
- Figure 26 Restoring Business Copy XP P-VOLs, step 9
- Combining Continuous Access XP Journal with Continuous Access XP (3DC cascading configuration)
- Combining Continuous Access XP Journal with Continuous Access XP Synchronous (3DC multi-target configuration)
- Figure 29 3DC multi-target configuration (combining Continuous Access XP Journal with Continuous Access XP Synchronous)
- Hardware configurations
- Setup procedure
- Recovering from primary site failures
- Changing to 3DC multi-target configurations after recovering from primary site failures
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations)
- Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC multi-target configurations)
- Recovering from primary site and Continuous Access XP Synchronous secondary site failures
- Transferring business tasks from Continuous Access XP Journal secondary sites to primary sites
- Combining Continuous Access XP Journal and LUN Security XP Extension
- 4 Configuring arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary arrays
- 5 Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- 6 Performing Continuous Access XP Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 Continuous Access XP Journal operations with NAS Blade
- Overview of Continuous Access XP Journal operations in NAS Blade systems
- Scope of Continuous Access XP Journal functions with NAS Blade
- Scope related to Continuous Access XP Journal
- Scope related to RAID Manager XP
- Figure 68 Executing the pairdisplay command in RAID Manager XP using the sudo command
- Figure 69 Executing the pairdisplay command using a shell script created in the SSH Client (for SSH protocol version 2)
- Figure 70 Executing the inqraid command using the sudo command
- Figure 71 Executing the inqraid command using a shell script created in the SSH client (for SSH protocol version 2)
- Scope related to NAS Backup Restore features
- Scope related to other Hitachi Network Attached Storage products
- Prerequisites
- Notes on operations
- Preparing for Continuous Access XP Journal operations
- Preparing for Continuous Access XP Journal volume pair operations
- Registration of public key used for SSH
- Configuring the RAID Manager XP environment
- Log in to the target NAS package using SSH
- Configure RAID Manager XP configuration definition files
- Figure 72 Example of configuring a pair LU
- Adding the HORCM_DEV and HORCM_INST sections using the mkconf.sh command in RAID Manager XP
- Creating a template for a RAID Manager XP configuration definition file
- Editing the template for the RAID Manager XP configuration definition file
- Table 29 Configuration definition file settings (HORCM_MON, HORCM_CMD) and specified values in NAS Blade system
- Figure 75 Example 1: RAID Manager XP configuration definition file (for instance number 16)
- Figure 76 Command execution that lists LUs constituting the file system sample
- Figure 77 Example 2: RAID Manager XP configuration definition file (for instance number 16)
- Table 30 Configuration definition file settings (HORCM_INST) and specified values in NAS Blade system
- Figure 78 Example 3: RAID Manager XP configuration definition file (for instance number 16)
- Checking the contents of the RAID Manager XP configuration definition file
- Figure 79 Procedure for starting RAID Manager XP
- Figure 80 Checking LDEV numbers of LUs specified in the HORCM_DEV section
- Figure 81 Checking device file and LDEV numbers of P-VOLs
- Figure 82 Checking device file and LDEV numbers for unused device files that can be S-VOLs
- Table 31 Locations of NAS package and port names specified in RAID Manager XP configuration definition files
- Figure 83 Stopping RAID Manager XP (for instance number 16)
- Cascade configuration of Continuous Access XP Journal and Business Copy XP
- Figure 84 Example of a cascade configuration of Continuous Access XP Journal and Business Copy XP
- Figure 85 Example of RAID Manager XP configuration definition file at primary site (instance 16)
- Figure 86 Example of RAID Manager XP configuration definition file at secondary site (instance 16)
- Figure 87 Example of RAID Manager XP configuration definition file at secondary site (instance 17)
- Setting the RAID XP Manager user environmental variable
- Settings for disaster recovery
- Create file systems in Continuous Access XP Journal P-VOLs
- Overview of Continuous Access XP Journal operations
- Remote copy operations
- Disaster recovery operations
- Operations of RAID Manager XP log files
- Commands
- Messages
- Notes on failures of external volumes
- 12 Troubleshooting
- A Power management for arrays and network relay devices
- B Pinned track recovery for Continuous Access XP Journal volumes
- C SIM reporting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 109 |
| Size: | 3.21 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Business Copy Software User Guide
- Contents
- 1 Overview of HP XP Business Copy Software
- 2 About XP Business Copy Operations
- 3 Interoperability with Other Products and Functions
- 4 Preparing for XP Business Copy Operations
- 5 Using the XP Business Copy GUI
- 6 Performing XP Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 178 |
| Size: | 2.42 MB |
Show table of contents
Document Outline
- Contents
- ShadowImage for the XP1024/XP128/XP12000/XP10000/SVS 200
- ShadowImage Components
- ShadowImage Requirements
- ShadowImage Operations
- ShadowImage Options
- At-Time Split Function
- ShadowImage Pair Status
- Cautions on Switching Off the Power Supply
- Cautions on Using the XP10000 Disk Array
- Preparing for ShadowImage Operations
- System Requirements
- Preparing for ShadowImage Operations
- Combining ShadowImage with Other Data Management Operations
- Combining ShadowImage and TrueCopy Operations
- Table 10 Host pair status reporting for SI390/TC390 shared volumes
- Table 11 Currency of a shared SI390 and TC390 volume
- Figure 10 SI390 and TC390: shared S-VOL/M-VOL
- Figure 11 SI390 and TC390: shared S-VOL/R-VOL
- Figure 12 SI390 and TC390: shared S-VOL/M-VOL and S-VOL/R-VOL
- Figure 13 SI390 and TC390: shared T-VOL/M-VOL
- Figure 14 SIz, URz, and TCz: Shared S-VOL / S-VOL / M-VOL
- Figure 15 SIz, TCz, and URz: Shared S-VOL / R-VOL / P-VOL
- Combining ShadowImage for z/OS (SIz) with Universal Replicator for z/OS (URz)
- Combining ShadowImage and TrueCopy Operations
- ShadowImage Main Window
- Performing ShadowImage Operations
- Setting the Reserve Attribute
- Resetting the Reserve Attribute
- Adding ShadowImage Pairs
- Splitting ShadowImage Pairs
- Resynchronizing ShadowImage Pairs
- Suspending ShadowImage Pairs
- Deleting ShadowImage Pairs
- Viewing the Past Record of Pair Operations
- Setting ShadowImage Options
- CTG Window
- FlashCopy(R) Mirror V2 Operations Panel
- Changing SCP Delay Time
- Using PPRC Commands for ShadowImage
- PPRC Command Support
- PSF and DEVSERV Commands
- Adding Pairs: CESTPAIR and PPRCOPY ESTPAIR
- Displaying Pair Status: CQUERY, PPRCOPY QUERY, DEVSERV
- Splitting Pairs: CSUSPEND and PPRCOPY SUSPEND
- Resynchronizing Pairs: MODE(RESYNC) Parameter
- Deleting Pairs: CDELPAIR and PPRCOPY DELPAIR
- Setting and Resetting the At-Time Split Time: ATSPLIT
- Displaying the Status of the Consistency Group: ATQUERY
- Using ShadowImage - FlashCopy
- Overview of ShadowImage - FlashCopy
- ShadowImage - FlashCopy Pair Status
- Establishing ShadowImage - FlashCopy Pairs
- Combining ShadowImage - FlashCopy With Other Copy Solutions
- Table 37 ShadowImage - FlashCopy and TC390 shared volume
- Figure 42 ShadowImage - FlashCopy and TCz: shared T-VOL and M-VOL/R-VOL (not allowed)
- Table 38 ShadowImage - FlashCopy and XRC shared volume
- Figure 43 FlashCopy® Mirror and URz: Shared T-VOL and P-VOL / S-VOL (Not Allowed)
- Table 39 ShadowImage - FlashCopy and URz shared volume
- Using ShadowImage - FlashCopy Host Commands
- Cautions on Switching Off the Power Supply When Using ShadowImage - FlashCopy
- Troubleshooting
- Using Compatible Mirroring for IBM FlashCopy Version2
- Overview of Compatible Mirroring for IBM FlashCopy Version2
- Functionalities of Compatible Mirroring for IBM FlashCopy Version2
- Establishing Multiple Relationships
- Specifying COPY mode or NOCOPY mode
- Volume Copying and Dataset Copying
- Relationship Expansion
- Copying Data by Using Consistency Group
- Incremental FlashCopy Function
- Reverse Restore Function
- Maximum Number of FlashCopy Mirror Version 2 Pairs
- Table 47 Number of Relations That Can Be Established With Volumes of Each Emulation Type and Capacity
- Figure 55 Copying Data in Two Extents that do not Overlap (One T-VOL)
- Figure 56 Copying Data in Two Extents that do not Overlap (Two T-VOLs)
- Figure 57 Copying Data in Two Extents that do not Overlap (Two S-VOLs)
- Figure 58 Copying Data in Three Extents that Overlap (One T-VOL)
- Figure 59 Copying Data in Two Extents that Overlap (Two T-VOLs)
- Figure 60 Copying One Extent to Another in the Same Volume
- Table 48 Referential Examples for Calculating the Number of Resources Required for FlashCopy Mirror Pairs
- Figure 61 Referential Example for Calculating the Number of Pairs
- Installing and Uninstalling Compatible Mirroring for IBM FlashCopy Version2
- Establishing Compatible Mirroring for IBM FlashCopy Version 2 Pairs
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With ShadowImage for z/OS®
- Figure 62 Pair Configuration Where an S-VOL of FlashCopy Mirror Version 2 and SIz is Shared
- Table 50 Relationship Between FlashCopy Mirror Version 2 Pair and Operation of the Copy Solutions
- Table 51 Relationship Between SIz Pair Status and FlashCopy Mirror Version 2 Operations
- Figure 63 Cases When FlashCopy Mirror Version 2 and SIz Cannot be Used in Conjunction
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With TrueCopy for z/OS®
- Volumes that can be shared
- Volumes that cannot be shared
- Figure 64 FlashCopy® Mirror Version 2 and TCz: Non-sharable combination
- Table 53 Volume Share of FlashCopy® Mirror Version 2 S-VOL and TCz
- Table 54 Whether Reverse Restore Can be Performed When FlashCopy® Mirror Version 2 S-VOL is Used as TCz Volume
- Table 55 Whether FlashCopy® Mirror Version 2 T-VOL Can be Used as TrueCopy for z/OS
- Table 56 Whether Reverse Restore Can be Performed When FlashCopy® Mirror Version 2 T-VOL is Used as TCz Volume
- Using a DFSMS command
- Using FlashCopy® Mirror Version 2 T-VOL and TrueCopy for z/OS M-VOL when shared
- Using a TSO command
- Using a ICKDSF command
- 7.4.1.3 Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With Universal Replicator for z/OS®
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With XRC Replication
- Combining Compatible Mirroring for IBM® FlashCopy® Version 2 With CC
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Solutions
- Using Compatible Mirroring for IBM FlashCopy Version 2 Host Commands
- DFSM Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- TSO Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- Creating FlashCopy Mirror Version 2 Pairs: FCESTABL
- Suspend the Write Operation to S-VOLs
- Withdrawing FlashCopy Mirror Version 2 Pairs: FCWITHDR
- Table 67 Parameters of FCWITHDR Command and Applicable Combinations
- Figure 77 Example of FCWITHDR Command Description (for Case 1)
- Figure 78 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 79 Example(1) of FCWITHDR Command Description (for Case 2)
- Figure 80 Ex.(1) of FCWITHDR Command (TDEVN: spec., DDSW = NO, XTNTLST parameter spec.)
- Figure 81 Example(2) of FCWITHDR Command Description (for Case 2)
- Figure 82 Ex.(2) of FCWITHDR Command (TDEVN: spec., DDSW = NO, XTNTLST parameter spec.)
- Figure 83 Example of FCWITHDR Command Description (for Case 3)
- Figure 84 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 85 Example(1) of FCWITHDR Command Description (for Case 4)
- Figure 86 Ex.(1) of FCWITHDR Comm. (SDEVN and TDEVN: spec., DDSW = NO, XTNTLST param. spec.)
- Figure 87 Example(2) of FCWITHDR Command Description (for Case 4)
- Figure 88 Ex.(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 89 Example(3) of FCWITHDR Command Description (for Case 4)
- Figure 90 Example of FCWITHDR Command Description (for Case 5)
- Figure 91 Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)
- Figure 92 Example of FCWITHDR Command Description (for Case 6)
- Figure 93 Ex. of FCWITHDR Comm. (SDEVN and TDEVN: specified., DDSW = YES, XTNTLST param. specified)
- Figure 94 Example of FCWITHDR Command Description (for Case 7)
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FCQUERY
- ICKDSF Command Supported by Compatible Mirroring for IBM® FlashCopy® Version 2
- Creating FlashCopy® Mirror Version 2 Pairs: FLASHCPY ESTABLISH
- Creating FlashCopy® Mirror Version 2 Pairs by Using Incremental FlashCopy (Restore): FLASHCPY ESTABLISH
- Withdrawing FlashCopy® Mirror Version 2 Pairs: FLASHCPY WITHDRAW
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FLASHCPY QUERY
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FLASHCPY QUERY RELATIONS
- Suspending FlashCopy Mirror Version 2 Pairs
- Relationship Btw. Comp. Mirror. for IBM FlashCpy. and Comp. Mirror. for IBM FlashCpy. Ver. 2
- Differences Between IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 1.37 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Performance Control User Guide
- Contents
- 1 Overview of HP StorageWorks XP Performance Control Software
- 2 About XP Performance Control
- 3 Preparing for XP Performance Control Operations
- 4 Performance Control Window
- 5 XP Performance Control Operations
- Overview of XP Performance Control Operations
- Starting XP Performance Control
- Port Tab Operations
- WWN Tab Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 219 |
| Size: | 6.16 MB |
Show table of contents
Document Outline
- Hitachi Universal Replicator for z/OS user guide for XP12000/XP10000 Disk Arrays and SVS 200
- About this Guide.
- 1 Overview of Universal Replicator for z
- 2 Overview of Universal Replicator Opera
- Functionality Overview
- Journal Copy
- Journal Restore
- URz Components
- XP Storage Systems
- Main and Remote Control Units
- Journal Group
- Data Volume Pair
- Journal Volume
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- URzRemoteConsole Software
- Host I/O Time-Stamping Function
- Error Reporting Communications (ERC)
- Remote Copy Operations
- Initial Copy Operations
- Update Copy Operation
- Journal Group Operations
- Read and Write I/O Operations
- Logical DKC (LDKC)
- Initiator Ports and RCU Target Ports
- Remote Copy Operations
- Initial Copy Operations
- Update Copy Operation
- Read and Write I/O Operations
- Journal Processing
- Creating and Storing Journals at the Primary Storage System
- Copying Journals to the Secondary Storage System
- Storing Journalatthe SecondaryStorage System
- Selecting and Restoring Journal at the Secondary Subsystem
- JournalGroup Operations
- Timer Type Option
- Journal Group Operations
- URz Delta Resync Operation
- URz Pair Status
- Business Continuity Manager Support
- Command Device
- 3PreparingforUniversalReplicator z/OS Operations
- System Requirements
- Requirements and Restrictions for URz
- Duplicate VOLSER (Volume Serial Number)
- Journal Group
- Accessing URz Primary Data Volume and Secondary Data Volume
- Installing the Hardware
- Enabling the URz Option(s)
- Planning of Journal Volumes
- Contributing Factors for Data Transfer Speed between Storage Systems
- Configuring the Primary and Secondary Storage Systems
- Using More Than One Primary and Secondary Storage System for Remote Console
- Basic Behavior
- Hardware Configuration (When More Than One Primary and Secondary Storage Systems are Used)
- Setup Procedure (When More Than One Primary and Secondary Subsystem are Used)
- Connections Among Secondary Storage Systems
- Disaster Recoveryfor Multiple Primaryand SecondaryStorage Systems
- Combining URz with Other Data Management Operations
- Combining URz with Virtual LVI
- Combining URz with Cache Residency Manager
- Combining URz and ShadowImage for z/OS
- Using At-Time Split Function When Combining URz with ShadowImage for z/OS
- Combining URz with TCz Synchronous (3DC Cascading Configuration)
- Combining URz with TCz Synchronous (3DC Multi-target Configuration)
- Changing to 3DC Multi-target Configuration after Recovering from Primary Site Failures
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Cascading Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (in 3DC Multi-target Configuration)
- Transferring Business Tasks from TCz Secondary Site to the Primary Site (When Delta Resync Operation is Performed in 3DC multi-target configuration)
- Recovering from Failures in the Primary Site and the TCz Synchronous Secondary Site
- Transferring Business Tasks from the URz Secondary Site to the Primary Site
- 4Configuring Disk Storage Systems and Logical Paths
- DKC Operation Window
- Configuring Port Attributes
- Associating the Primary and the Remote Storage Systems and Configuring Logical Paths (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Deleting Logical Paths
- Viewing the Status of Logical Paths
- Removing the Relationship Between the Primary and the SecondaryStorage Systems
- 5 Using Journal Groups
- Displaying the Journal Operation Window
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Suspending a copy operation)
- Restoring a Mirror (Resuming a copy operation)
- Deleting Data Volumes from a Mirror (Ending a copy operation)
- Forcibly Removing Journal Groups from an Extended Consistency Group
- 6 Performing URz Pair Operations
- Displaying the Pair Operation Window
- Creating a Pair of Data Volumes
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes
- Restoring a Pair of Data Volumes
- Deleting a Pair of Data Volumes
- Creating a Point-in-Time Copy of Data Volumes
- 7 Monitoring Remote Copy Operations
- 8 Viewing History of Data Volume Pair Operations
- 9 Performing Optional Operations
- 10 Using Extended Consistency Groups
- 11 Disaster Recovery Operations
- 12 Troubleshooting
- 13 Power Management for Disk Storage Systems and Network Relay Devices
- 14 Pinned Track Recovery for URz Volumes
- 15 SIM Reporting
- 16 Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 215 |
| Size: | 1.87 MB |
Show table of contents
Document Outline
- XP Continuous Access Journal User Guide
- Contents
- 1 Overview of HP Copy Solutions
- 2 Overview of XP Continuous Access Journal
- Overview of functionality
- Components
- Remote copy operations
- Journal processing
- Journal group operations
- XP Continuous Access Journal delta resync operations
- XP Continuous Access Journal data volume pair status
- 3 XP Continuous Access Journal operations requirements and restrictions
- System requirements
- Requirements and restrictions for XP Continuous Access Journal
- Installing hardware
- Enabling XP Continuous Access Journal options
- Planning for journal volumes
- Configuring primary and secondary arrays for XP Continuous Access Journal operations
- Combining XP Continuous Access Journal with other data management functions
- Combining XP Continuous Access Journal with LUSE
- Combining XP Continuous Access Journal with Virtual LUN
- Combining XP Continuous Access Journal with XP Cache LUN
- Combining XP Continuous Access Journal with LUN Manager
- Combining XP Continuous Access Journal and XP Performance Control
- Combining XP Continuous Access Journal and XP Business Copy
- Combining XP Continuous Access Journal with XP Continuous Access (3DC cascading configuration)
- Combining XP Continuous Access Journal with XP Continuous Access Synchronous (3DC multi-target configuration)
- Hardware configurations
- Setup procedure
- Requirements for creating XP Continuous Access Journal pairs for delta resync operations
- Requirements for performing delta resync operations
- Recovering from primary site failures (prior to 50-08-xx firmware)
- Recovering from primary site failures via delta resync (50-08-xx or greater FW) (prior to 50-08-xx FW)
- Change to 3DC multi-target configuration after primary site failure
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC cascade)
- Transfer tasks from XP Continuous Access secondary sites to primary sites (3DC multi-target)
- Transfer tasks-DC1 without jrnl pr to DC1 with jrnl pr (delta resync/3DC multi-target)
- Recovering from primary site and XP Continuous Access Synchronous secondary site failures
- Transferring business tasks from XP Continuous Access Journal secondary sites to primary sites
- Combining XP Continuous Access Journal and XP LUN Security Extension
- 4 Configuring arrays and logical paths
- Displaying the DKC Operation pane
- Configuring port attributes
- Associating primary and remote arrays and configuring logical paths (Add DKC)
- Changing options for logical paths and arrays
- Adding logical paths
- Deleting logical paths
- Viewing the status of logical paths
- Removing the relationship between primary and secondary arrays
- 5 Using journal groups
- Displaying the Journal Operation pane
- Registering journal volumes in journal groups
- Deleting journal volumes from journal groups
- Displaying detailed information about journal groups
- Changing options for journal groups
- Deleting journal groups
- Splitting mirrors (Pairsplit-r: suspending copy operations)
- Restoring mirrors (Pairresync: resuming copy operations)
- Deleting data volumes from mirrors (Pairsplit-S: ending copy operations)
- 6 Performing XP Continuous Access Journal pair operations
- Displaying the Pair Operation pane
- Creating a pair of data volumes (Paircreate)
- Displaying detailed information about a pair of data volumes
- Changing options for data volume pairs
- Splitting a pair of data volumes
- Restoring a pair of data volumes
- Deleting a pair of data volumes
- Creating a Point-in-Time copy of data volumes
- 7 Monitoring remote copy operations
- 8 Viewing history of data volume pair operations
- 9 Performing optional operations
- 10 Disaster recovery operations
- 11 XP Continuous Access Journal operations with NAS Blade
- Overview of XP Continuous Access Journal operations in NAS Blade systems
- Scope of XP Continuous Access Journal functions with NAS Blade
- Prerequisites
- Notes on operations
- Preparing for XP Continuous Access Journal operations
- Preparing for XP Continuous Access Journal volume pair operations
- Registration of public key used for SSH
- Configuring the XP RAID Manager environment
- Log in to the target NAS package using SSH
- Configure XP RAID Manager configuration definition files
- Adding the HORCM_DEV and HORCM_INST sections using the mkconf.sh command in XP RAID Manager
- Creating a template for an XP RAID Manager configuration definition file
- Editing the template for the XP RAID Manager configuration definition file
- Checking the contents of the XP RAID Manager configuration definition file
- Cascade configuration of XP Continuous Access Journal and XP Business Copy
- Setting the XP RAID Manager user environmental variable
- Settings for disaster recovery
- Create file systems in XP Continuous Access Journal P-VOLs
- Overview of XP Continuous Access Journal operations
- Operations of XP RAID Manager log files
- Commands
- Messages
- Notes on failures of external volumes
- 12 Troubleshooting
- 13 Power management for arrays and network relay devices
- 14 Pinned track recovery for XP Continuous Access Journal volumes
- 15 SIM reporting
- 16 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 178 |
| Size: | 5.64 MB |
Show table of contents
Document Outline
- HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000 Disk Arrays and SVS 200
- About this guide.
- 1 Overview of XP Remote Web Console Oper
- 2 Installation Requirements and Procedur
- System Requirements
- Setting up the XP Remote Web Console
- Configuring Your Web Browser
- Configuring XP Remote WebConsole over aFi
- Configuring the Java™ Plug-In
- For JRE 1.4
- For JRE 5.0 and JRE 6.0
- Using the XP Remote Web Console
- XP Remote Web Console Conventions
- Keystroke and Navigation Conventions for
- Conventions for Using the XP Remote Web
- NotesonUsing theXPRemoteWeb ConsoleonWin
- Starting Up and Logging on to the XP Rem
- RestrictiononAccessingLocal Client Files
- For JRE 1.4
- For JRE 5.0
- LoggingontoanArray
- View Mode and Modify Mode
- Changing Between View Mode and Modify Mo
- Extending the Modify Mode Timeout Period
- License Keys
- Enabling and Disabling Options on the XP
- XP Remote Web Console Options
- License Key Pane
- Enabling XP Remote Web Console Options U
- Enabling XP Remote Web Console Options U
- Enabling Available XP Remote Web Console
- DisablingXPRemoteWeb ConsoleOptions
- Allocating Licensed Capacity among Stora
- Overview of Storage Logical Partitions
- License Key Partition Definition Pane
- Partitioning Licensed Capacity and Alloc
- 3 Performing XP Remote Web Console Opera
- Product Option Icons (Common to All XP R
- Launching the Desired Option
- Remote Web Console Features
- Viewing Detailed Information of the Arra
- Capacity Box (Open Systems)
- Number of LDEVs Box
- System Tab on the XP Remote Web Console
- Base Information
- XP Remote Web Console Main Pane, Status
- Detail Pane
- Setting User Accounts (Account Pane)
- Registering New User Accounts
- Changing the Password of User Accounts
- Changing Operation Authority of User Acc
- Deleting User Account
- Basic Information Display Pane
- Basic Information Display Pane, Port Pan
- Basic Information Display Pane, LUN Tab
- Basic Information Display Pane , LDEV Ta
- Displaying the Detailed Information on L
- Downloading the Audit Log File
- Checking the Audit Log Using the Syslog
- Transferring Audit Log to FTP Server (Au
- Control Panel
- Setting the XP Remote Web Console Enviro
- Downloading theConfiguration Files (Downl
- Restoring Backups of Configuration Files
- Extending Cache Memory and LUs Using the
- On-Demand Pane
- ExtendingLUs Usingthe On-DemandStorage L
- Extending Cache Memory Using On-Demand S
- Allocating Extended Cache Memory to CLPR
- Downloading Trace Files Using the FD Dum
- 4 Setting SNMP Agent Properties.
- 5 SSL Encrypted Communication
- 6 Configuration File Loader
- Overview of Configuration File Loader
- General Spreadsheet Conventions
- Spreadsheet File Requirements
- Spreadsheet Components
- Spreadsheet Declaration
- Function Tags
- Configuration Definitions
- Comments
- New Settings CanAffectOther Settings
- LUN Manager Spreadsheet Settings
- Column Format
- Setting the CHA Mode
- Port Settings
- Setting the Host Group
- Setting theWWN Information
- Setting the LU Path
- Configuring the Command Devices
- Configuration File Loader Operations
- Configuration File Loader Pane
- Using Configuration File Loader
- Exporting a Spreadsheet
- Editing the Spreadsheet
- Importing the Spreadsheet
- First Error Check
- Second Error Check
- Third Error Check
- 7 Troubleshooting
- Acronyms and Abbreviations.
- Index.
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 356 KB |
Show table of contents
Document Outline
- HP StorageWorks Cache LUN XP user guide for the XP1024/XP128
- Contents
- About this guide
- 1 Cache LUN XP for the XP1024/XP128
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 6.27 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000/XP20000 Remote Web Console User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 172 |
| Size: | 2.75 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Performance Monitor User Guide
- Contents
- 1 Overview of Performance Monitor
- 2 About Performance Monitor
- Components
- Overview of Performance Monitor
- Understanding Statistical Storage Ranges
- Parity Group Usage Statistics
- Volume Usage Statistics
- External Volume Group Usage Statistics
- External Volume Usage Statistics
- Channel Processor Usage Statistics
- Disk Processor Usage Statistics
- DRR Processor Usage Statistics
- Write Pending Rate and Cache Memory Usage Statistics
- Access Path Usage Statistics
- Hard Disk Drive Workload Statistics
- Port Traffic Statistics
- LU Path Traffic Statistics
- Traffic between HBAs and Storage System Ports
- Overview of Export Tool
- Interoperability with Other Products
- 3 Preparing for Performance Monitor Operations
- 4 Using the Performance Monitor Windows
- 5 Performance Monitor Operations
- Overview of Performance Monitor Operations
- Monitoring Resources in the Storage System
- Viewing Usage Statistics about Parity Groups
- Viewing Usage Statistics about Volumes in Parity Groups
- Viewing Usage Statistics about External Volume Groups
- Viewing Usage Statistics about External Volumes in External Volume Groups
- Viewing Usage Statistics about Channel Processors (CHPs)
- Viewing Usage Statistics about Disk Processors (DKPs)
- Viewing Usage Statistics about Data Recovery and Reconstruction Processors (DRRs)
- Viewing Write Pending and Cache Memory Usage Statistics
- Viewing Usage Statistics about Access Paths
- Monitoring Hard Disk Drives
- Monitoring Ports
- Monitoring LU Paths
- Viewing HBA Information
- 6 Using the Export Tool
- Files to be Exported
- Preparing for Using the Export Tool
- Using the Export Tool
- Command Reference
- Causes of Invalid Monitoring Data
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 54 |
| Size: | 1004 KB |
Show table of contents
Document Outline
- HP StorageWorks Flex Copy XP user guide
- Contents
- About this guide
- 1 Flex Copy XP overview
- 2 Preparing for Flex Copy XP operations
- 3 Requirements and overview of copy operations
- Requirements for volumes that can be used as copy pairs
- Overview of copy operations
- General cautions and notes about Flex Copy XP operations
- Cautions about Flex Copy XP copy pair volumes
- Copy pair status
- Copy operations from Flex Copy XP (Command View XP or XP Remote Web Console)
- Copy operations from RAID Manager XP
- 4 Flex Copy XP copy operations
- 5 Troubleshooting
- A Adjusting volume capacity for copy pair settings
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 18 |
| Size: | 312 KB |
Show table of contents
Document Outline
- Contents
- 1 XP Data Shredder for the XP128/XP1024/XP10000/XP12000
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 473 KB |
Show table of contents
Document Outline
- XP24000/XP20000 Performance Control User's Guide
- Table of Contents
- 1 Overview of HP StorageWorks XP Performance Control
- 2 About XP Performance Control
- 3 Preparing for XP Performance Control Operations
- 4 Performance Control Windows
- 5 XP Performance Control Operations
- Overview of XP Performance Control Operations
- Starting XP Performance Control
- Port Tab Operations
- WWN Tab Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 248 |
| Size: | 4.10 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 138 |
| Size: | 4.92 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 External Storage Software User’s Guide
- About this Guide
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About External Storage Operations
- 3 Preparing for External Storage Operations
- 4 Using the External Storage GUI
- 5 Performing External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconneccting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Editing Mapping Policy
- Deleting the External Volume Mapping
- 6 Remote Command Devices
- 7 Troubleshooting
- A Connecting External Storage Systems
- TagmaStore AMS Storage System, TagmaStore WMS Storage System
- Thunder 9500V Storage System
- USP V Storage System
- TagmaStore USP Storage System, TagmaStore NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- EVA Storage System
- System Parameter Settings for Connecting Sun StorEdge 6120/6320
- System Parameter Settings for Connecting StorageTek FlexLine 380
- System Parameter Settings for Connecting CLARiiON CX600
- Non-HP Storage Systems
- B Required Volume Capacity for Each Emulation Type
- C Adjusting Volume Capacities for Pairs
- D Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 48 |
| Size: | 1.11 MB |
Show table of contents
Document Outline
- XP24000/XP20000 for Compatible Extended Remote Copy (XRC) Software User's Guide
- Table of Contents
- About this Guide
- 1 Overview of Compatible XRC
- 2 About Compatible XRC Operations
- 3 Preparing for Compatible XRC Operations
- 4 Performing Compatible XRC Operations
- 5 Troubleshooting
- A Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 115 |
| Size: | 1.01 MB |
Show table of contents
Document Outline
- XP Continuous Access User Guide
- Contents
- 1 XP Continuous Access features
- 2 Overview of XP Continuous Access operations
- 3 Preparing for XP Continuous Access operations
- System requirements
- Requirements and restrictions
- Installing hardware
- Configuring MCUs and RCUs for XP Continuous Access operations
- Combining XP Continuous Access with other data management operations
- Combining XP Continuous Access and XP Business Copy
- Combining XP Continuous Access and LUN Security XP Extension
- Copying access attributes
- License capacity for LUN Security XP Extension
- Combining XP Continuous Access and Volume Manager
- Combining XP Continuous Access and Custom Volume Size (CVS)
- Combining XP Continuous Access and Cache LUN XP
- Combining XP Continuous Access and LUN Manager
- Combining XP Continuous Access and Auto LUN XP
- Combining XP Continuous Access and XP Performance Control
- 4 Starting XP Continuous Access
- 5 Performing XP Continuous Access configuration operations
- MCU operations
- RCU operations
- Viewing RCU Status (RCU Status)
- Registering RCUs (Add RCU)
- Modifying RCU options (Change RCU Option)
- Deleting RCUs (Delete RCU)
- RCU path parameters
- Adding and deleting logical paths for RCUs (Add Path/Delete Path)
- Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
- Port change operation
- Modifying parameters and deleting settings
- XP Continuous Access Asynchronous operations
- Usage Monitor operations
- Optimizing XP Continuous Access operations and disk array performance
- Discontinuing XP Continuous Access operations
- Performing XP Continuous Access pair operations
- Common procedure for XP Continuous Access pair operations
- Viewing XP Continuous Access pair status for LUs and LDEVs (Pairdisplay)
- Creating XP Continuous Access volume pairs (Paircreate)
- Splitting XP Continuous Access pairs (Pairsplit-r)
- Resuming XP Continuous Access volume pairs (Pairresync)
- 6 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 40 |
| Size: | 299 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 117 |
| Size: | 1005 KB |
Show table of contents
Document Outline
- Hitachi ShadowImage™ for Mainframe User's Guide
- Contents
- 1 Overview of Hitachi ShadowImage™ for Mainframe
- 2 About ShadowImage for Mainframe Operations
- 3 Interoperability with other Products and Functions
- Virtual LVI
- Cache Residency Manager
- Volume Security
- Volume Retention Manager
- XP Auto LUN
- HP StorageWorks XP External Storage Software
- Hitachi TrueCopy™ for Mainframe
- XP Continuous Access Journal Software™ for Mainframe
- TrueCopy for Mainframe and Universal Replicator for Mainframe
- HP StorageWorks XP for Compatible Extended Remote Copy (XRC) Software
- Concurrent Copy
- 4 Preparing for ShadowImage for Mainframe Operations
- 5 Using the ShadowImage for Mainframe GUI
- 6 Performing ShadowImage for Mainframe Operations Using Remote Web Console
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Configuring CTGs
- Adding Pairs
- Splitting Pairs
- Using PPRC Commands to Split, Resynchronize, and Delete Pairs in a CTG
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operations History
- 7 Performing ShadowImage for Mainframe Pair Operations Using XP for Business Continuity Manager Software
- 8 Performing ShadowImage for Mainframe Pair Operations Using PPRC
- 9 Troubleshooting
- 10 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 30 |
| Size: | 403 KB |
Show table of contents
Document Outline
- Contents
- Cache LUN XP for the XP10000/XP12000
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 130 |
| Size: | 1.96 MB |
Show table of contents
Document Outline
- Contents
- 1 ShadowImage for the XP128/XP1024/XP10000/XP12000
- ShadowImage Components
- ShadowImage Requirements
- ShadowImage Operations
- ShadowImage Options
- At-Time Split Function
- ShadowImage Pair Status
- Cautions on Switching Off the Power Supply
- Cautions on Using the XP10000 Disk Array
- Preparing for ShadowImage Operations
- System Requirements
- Preparing for ShadowImage Operations
- Combining ShadowImage with Other Data Management Operations
- Combining ShadowImage and TrueCopy Operations
- Table 10 Host pair status reporting for SI390/TC390 shared volumes
- Table 11 Currency of a shared SI390 and TC390 volume
- Figure 10 SI390 and TC390: shared S-VOL/M-VOL
- Figure 11 SI390 and TC390: shared S-VOL/R-VOL
- Figure 12 SI390 and TC390: shared S-VOL/M-VOL and S-VOL/R-VOL
- Figure 13 SI390 and TC390: shared T-VOL/M-VOL
- Combining ShadowImage for z/OS (SIz) with Universal Replicator for z/OS (URz)
- Combining ShadowImage and TrueCopy Operations
- Starting ShadowImage
- Performing ShadowImage Operations
- Setting the Reserve Attribute
- Resetting the Reserve Attribute
- Adding ShadowImage Pairs
- Splitting ShadowImage Pairs
- Resynchronizing ShadowImage Pairs
- Suspending ShadowImage Pairs
- Deleting ShadowImage Pairs
- Viewing the Past Record of Pair Operations
- Setting ShadowImage Options
- CTG Window
- Using PPRC Commands for ShadowImage
- PPRC Command Support
- PSF and DEVSERV Commands
- Adding Pairs: CESTPAIR and PPRCOPY ESTPAIR
- Displaying Pair Status: CQUERY, PPRCOPY QUERY, DEVSERV
- Splitting Pairs: CSUSPEND and PPRCOPY SUSPEND
- Resynchronizing Pairs: MODE(RESYNC) Parameter
- Deleting Pairs: CDELPAIR and PPRCOPY DELPAIR
- Setting and Resetting the At-Time Split Time: ATSPLIT
- Displaying the Status of the Consistency Group: ATQUERY
- Using ShadowImage - FlashCopy
- Overview of ShadowImage - FlashCopy
- ShadowImage - FlashCopy Pair Status
- Establishing ShadowImage - FlashCopy Pairs
- Combining ShadowImage - FlashCopy With Other Copy Solutions
- Using ShadowImage - FlashCopy Host Commands
- Cautions on Switching Off the Power Supply When Using ShadowImage - FlashCopy
- Troubleshooting
- Using Compatible Mirroring for IBM FlashCopy Version2
- Overview of Compatible Mirroring for IBM FlashCopy Version2
- Functionalities of Compatible Mirroring for IBM FlashCopy Version2
- Establishing Multiple Relationships
- Specifying COPY mode or NOCOPY mode
- Volume Copying and Dataset Copying
- Maximum Number of FlashCopy Mirror Version 2 Pairs
- Table 47 Number of Relations That Can Be Established With Volumes of Each Emulation Type and Capacity
- Figure 45 Copying Data in Two Extents that do not Overlap (One T-VOL)
- Figure 46 Copying Data in Two Extents that do not Overlap (Two T-VOLs)
- Figure 47 Copying Data in Two Extents that do not Overlap (Two S-VOLs)
- Figure 48 Copying Data in Three Extents that Overlap (One T-VOL)
- Figure 49 Copying Data in Two Extents that Overlap (Two T-VOLs)
- Figure 50 Copying One Extent to Another in the Same Volume
- Table 48 Referential Examples for Calculating the Number of Resources Required to Create the FlashCopy Mirror Version 2 Pairs
- Figure 51 Referential Example for Calculating the Number of Pairs
- Installing and Uninstalling Compatible Mirroring for IBM FlashCopy Version2
- Establishing Compatible Mirroring for IBM FlashCopy Version 2 Pairs
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Table 49 FlashCopy Mirror Version 2 and Other Copy Solutions Shared Volumes
- Figure 52 Pair Configuration Where an S-VOL of FlashCopy Mirror Version 2 and SIz is Shared
- Table 50 Relationship Between FlashCopy Mirror Version 2 Pair and Operation of the Copy Solutions
- Table 51 Relationship Between SIz Pair Status and FlashCopy Mirror Version 2 Operations
- Figure 53 Cases When FlashCopy Mirror Version 2 and SIz Cannot be Used in Conjunction
- Table 52 FlashCopy Mirror Version 2 and TCz, URz, and XRC Shared Volume
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Solutions
- Combining Compatible Mirroring for IBM FlashCopy Version 2 With Other Copy Solutions
- Using Compatible Mirroring for IBM FlashCopy Version 2 Host Commands
- DFSM Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- TSO Command Supported by Compatible Mirroring for IBM FlashCopy Version 2
- Creating FlashCopy Mirror Version 2 Pairs: FCESTABL
- Withdrawing FlashCopy Mirror Version 2 Pairs: FCWITHDR
- Table 57 Parameters of FCWITHDR Command and Applicable Combinations
- Figure 61 Example of FCWITHDR Command Description (for Case 1)
- Figure 62 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 63 Example(1) of FCWITHDR Command Description (for Case 2)
- Figure 64 Example(1) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 65 Example(2) of FCWITHDR Command Description (for Case 2)
- Figure 66 Example(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 67 Example of FCWITHDR Command Description (for Case 3)
- Figure 68 Example of FCWITHDR Command (TDEVN: specified, DDSW = NO)
- Figure 69 Example(1) of FCWITHDR Command Description (for Case 4)
- Figure 70 Example(1) of FCWITHDR Command (SDEVN and TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 71 Example(2) of FCWITHDR Command Description (for Case 4)
- Figure 72 Example(2) of FCWITHDR Command (TDEVN: specified, DDSW = NO, XTNTLST parameter specified)
- Figure 73 Example(3) of FCWITHDR Command Description (for Case 4)
- Figure 74 Example of FCWITHDR Command Description (for Case 5)
- Figure 75 Example of FCWITHDR command (SDEVN and TDEVN: specified, DDSW = YES)
- Figure 76 Example of FCWITHDR Command Description (for Case 6)
- Figure 77 Example of FCWITHDR Command (SDEVN and TDEVN: specified, DDSW = YES, XTNTLST parameter specified)
- Displaying Information on FlashCopy Mirror Version 2 Pairs: FCQUERY
- Cautions on Switching Off the Power Supply When Using Compatible Mirroring for IBM FlashCopy Version 2
- Suspending FlashCopy Mirror Version 2 Pairs
- Relationship Between Compatible Mirroring for IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Differences Between IBM FlashCopy and Compatible Mirroring for IBM FlashCopy Version 2
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 53 |
| Size: | 1.69 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Auto LUN Software User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 92 |
| Size: | 1.40 MB |
Show table of contents
Document Outline
- Contents
- Business Copy XP (BC) for the XP10000/XP12000
- Overview of BC operations
- BC components
- BC requirements for XP12000 and XP10000
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Figure 5 Reverse and quick restore pair operations
- To avoid any performance impact due to the quick restore operation
- Table 9 Requirements for reverse or quick restore pairresync operations
- Figure 6 BC P-VOL forming pair with Continuous Access XP S-VOL and external S-VOL, respectively
- Figure 7 BC P-VOL forming pair with external S-VOL and shared as Continuous Access XP S-VOL
- Figure 8 BC S-VOL forming pair with external P-VOL and shared as Continuous Access XP P-VOL
- Figure 9 BC P-VOL forming pair with Continuous Access XP Journal S-VOL and External S-VOL, respectively
- Figure 10 BC P-VOL forming pair with external S-VOL and shared as Continuous Access XP Journal S-VOL
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- Figure 12 Cascade pairs
- Table 11 Relationship between L1 pair status and L2 pair operations
- Table 12 Relationship between L2 pair status and L1 pair operations
- Table 13 Read/write operation (host to the node volume) and L1/L2 pair status
- Table 14 Read/write operation (host to the leaf volume) and L2 pair status
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Cautions on using the XP10000
- Preparing for BC operations
- System requirements
- Preparing for BC operations
- Combining BC with other data management operations
- Combining BC and Continuous Access XP Journal operations
- Combining BC and Continuous Access XP operations
- Figure 18 BC and Continuous Access XP: shared P-VOL/P-VOL
- Figure 19 BC and Continuous Access XP: shared P-VOL/S-VOL
- Figure 20 BC and Continuous Access XP: shared P-VOL/P-VOL and P-VOL/S-VOL
- Figure 21 BC and Continuous Access XP: shared S-VOL/P-VOL
- Figure 22 BC, Continuous Access XP Journal, and Continuous Access XP: Shared S-VOL/P-VOL/S-VOL
- Figure 23 BC, Continuous Access XP, and Continuous Access XP Journal: Shared S-VOL/P-VOL/S-VOL
- Combining BC with LUN Security XP Extension
- Copying access attributes
- License capacity of LUN Security XP Extension
- Starting BC
- Performing BC operations
- BC error codes
- Overview of BC operations
- Maximum pair calculations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 70 |
| Size: | 1.03 MB |
Show table of contents
Document Outline
- Contents
- Business Copy XP (BC) for the XP128/XP1024
- Overview of BC operations
- BC components
- BC requirements
- BC operations
- Set reserve attribute operation
- Reset reserve attribute operation
- Paircreate operation
- Initial copy operation
- Update copy operation
- Cascade function
- Pairsplit operation
- Pairresync operations
- Forward pairresync operation
- Backward pairresync operation
- Pair status and time required for pairresync
- Pairsplit-E operation (suspend)
- Pairsplit-S operation (delete)
- BC options
- Cascade function
- Figure 7 Cascade pairs
- Table 7 Relationship between L1 pair status and L2 pair operations
- Table 8 Relationship between L2 pair status and L1 pair operations
- Table 9 Read/write operation (host to the node volume) and L1/L2 pair status
- Table 10 Read/write operation (host to the leaf volume) and L2 pair status
- At-Time Split function
- Pair status
- Cautions on switching off the power supply
- Preparing for BC operations
- Performing BC operations
- Performing BC operations
- BC error codes
- Overview of BC operations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 176 |
| Size: | 5.07 MB |
Show table of contents
Document Outline
- About this guide
- 1 Overview of connection external arrays
- 2 Preparing for External Storage XP operations
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- B Required colume capacity for emulation types
- c Adjusting volume capacity for copy pair setting
- D Configuring MSA 1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 64 |
| Size: | 914 KB |
Show table of contents
Document Outline
- Contents
- Compatible PAV Function for the XP1024/XP128/XP12000/XP10000
- Overview of Compatible PAV Operations
- Preparing for Compatible PAV Operations
- Performing Compatible PAV Operations
- Monitoring Compatible PAV Activities
- Additional MVS Commands
- GTF I/O Tracing
- Figure 13 Sample Output of Display Command - Compatible PAV Base Device with 5 Aliases
- Figure 14 Sample Output of Display Command - Compatible Hyper PAV with 16 Aliases
- Figure 15 DEVSERV DISPLAY PATHS Command
- Figure 16 Sample DEVSERV QPAV Command (Compatible PAV)
- Figure 17 Sample DEVSERV QPAV Command (Compatible Hyper PAV)
- Figure 18 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible PAV)
- Figure 19 Sample Output of DEVSERV QPAV,SSID=xxxx Command (Compatible Hyper PAV)
- Figure 20 Sample Output of DS QP,xxxx,VOLUME Command (Compatible PAV)
- Figure 21 Sample Output of DS QP,xxxx,VOLUME Command (Compatible Hyper PAV)
- Figure 22 Sample Output of D IOS,HYPERPAV Command
- Using HCD to Define and View XP1024/XP128/XP12000/XP10000 LCUs and Compatible PAV Devices
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Figure 23 Basic HCD Panel
- Figure 24 Define, Modify, Or View Configuration Data
- Figure 25 Add Control Unit Panel
- Figure 26 Selecting the Operating System
- Figure 27 Select, Change Option
- Figure 28 Control Unit Chpid, CUADD, and Device Address Range Addressing
- Figure 29 Define, Modify, Or View Configuration Data
- Figure 30 I/O Device List
- Figure 31 Add Device
- Figure 32 Device / Processor Definition Panel - Selecting the Processor ID
- Figure 33 Define Device / Processor Panel
- Figure 34 Define Device to OS Configuration Window - Selecting the OS Configuration
- Figure 35 Select / Disconnect Option
- Figure 36 Define Device Parameters / Features
- Displaying Compatible PAV Device Parameters
- Using HCD to Define an XP1024/XP12000/XP10000 LCU and the Base and Alias Devices
- Checking the WLM PAV Settings
- Settings about Compatible Hyper PAV
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 108 |
| Size: | 1.78 MB |
Show table of contents
Document Outline
- HP StorageWorks Continuous Access XP user guide for the XP1024/XP128
- Contents
- About this guide
- 1 Continuous Access XP for the XP1024/XP128
- Overview of Continuous Access XP operations
- Components
- Figure 1 Continuous Access XP components for Fibre Channel connections
- Figure 2 Continuous Access XP components for Serial (ESCON) connections
- XP1024/XP128
- Main and remote control units (MCUs and RCUs)
- Volume pairs (P-VOLs and S-VOLs)
- Continuous Access XP Asynchronous consistency groups
- Remote copy connections
- Initiator ports and RCU target ports
- Remote control ports (RCPs) and local control ports (LCPs)
- Command View XP management station or XP Remote Web Console
- Host failover software
- Remote copy operations
- Continuous Access XP Asynchronous recordset operations
- Continuous Access XP Asynchronous consistency group operations
- Continuous Access XP volume pair status
- Components
- Preparing for Continuous Access XP operations
- System requirements
- Requirements and restrictions
- Installing hardware
- Configuring MCUs and RCUs for Continuous Access XP operations
- Combining Continuous Access XP with other data management operations
- Combining Continuous Access XP and BC
- Table 10 Host pair status reporting for Continuous Access XP, BC, and Continuous Access XP/BC shared volumes
- Table 11 Data currency of a shared Continuous Access XP/BC volume
- Figure 15 Shared Continuous Access XP P-VOL and shared BC P-VOL
- Figure 16 Shared Continuous Access XP S-VOL and shared BC P-VOL
- Figure 17 Shared Continuous Access XP/BC P-VOL and shared Continuous Access XP S-VOL/BC P-VOL
- Figure 18 Shared BC S-VOL/Continuous Access XP P-VOL
- Combining Continuous Access XP and BC
- Starting Continuous Access XP
- Figure 19 Continuous Access XP main pane
- Continuous Access XP panes
- Continuous Access XP main pane (Pair Operation pane)
- RCU Operation pane
- Asynchronous Operation pane
- Usage Monitor pane
- History Operations pane
- Performing Continuous Access XP configuration operations
- MCU operations
- RCU operations
- Viewing RCU Status (RCU Status)
- Registering RCUs (Add RCU)
- Modifying RCU options (Change RCU Option)
- Deleting RCUs (Delete RCU)
- RCU path parameters
- Adding and deleting logical paths for RCUs (Add Path/Delete Path)
- Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
- Port change operation
- Modifying parameters and deleting settings
- Continuous Access XP Asynchronous operations
- Usage Monitor operations
- Optimizing Continuous Access XP operations and disk array performance
- Discontinuing Continuous Access XP operations
- Performing Continuous Access XP pair operations
- Preparing for Continuous Access XP volume pair operations
- Common procedure for Continuous Access XP pair operations
- Viewing Continuous Access XP pair status for LUs and LDEVs (Pairdisplay)
- Creating Continuous Access XP volume pairs (Paircreate)
- Splitting Continuous Access XP pairs (Pairsplit-r)
- Resuming Continuous Access XP volume pairs (Pairresync)
- Deleting Continuous Access XP volume pairs (Pairsplit-S)
- Changing pair options (Change Pair Option)
- Using Continuous Access XP for data migration and duplication
- Powering off and on Continuous Access XP components
- Continuous Access XP disaster recovery operations
- Error codes and messages
- Pinned track recovery for Continuous Access XP volumes
- Overview of Continuous Access XP operations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 113 |
| Size: | 1.37 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Business Copy Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Business Copy Software
- 2 About XP Business Copy Operations
- 3 Interoperability with Other Products and Functions
- Open Volume Management
- Cache Residency Manager
- LUN Manager
- Data Retention Utility
- XP Auto LUN
- HP StorageWorks XP External Storage Software
- XP Continuous Access
- XP Continuous Access Journal
- XP Continuous Access and XP Continuous Access Journal
- HP StorageWorks XP Thin Provisioning Software
- VERITAS NetBackup DataCenter
- 4 Preparing for XP Business Copy Operations
- 5 Using the XP Business Copy GUI
- 6 Performing XP Business Copy Operations
- Configuring the Volume List
- Changing or Deleting the Settings in Preview List
- Setting or Resetting the Reserve Attribute
- Setting Options
- Creating Pairs
- Splitting Pairs
- Suspending Pairs
- Resynchronizing Pairs
- Deleting Pairs
- Viewing Detailed Volume and Pair Information
- Viewing S-VOL Path Information
- Viewing the Number of Pairs and License Information
- Viewing Pair Operation History
- 7 Troubleshooting
- 8 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 84 |
| Size: | 797 KB |
Show table of contents
Document Outline
- XP Snapshot User Guide
- 1 Overview of copy solutions
- 2 XP Snapshot functions
- 3 Requirements for XP Snapshot operations
- 4 Using XP Snapshot
- 5 XP Snapshot operations
- Displaying the XP Business Copy main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating XP Snapshot pairs
- Storing snapshot data
- Restoring XP Snapshot pairs
- Deleting snapshot data
- Deleting XP Snapshot pairs
- Displaying detailed information about XP Snapshot pairs
- Displaying operation history
- 6 Troubleshooting
- 7 Support and other resources
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 129 |
| Size: | 4.25 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 Performance Monitor User's Guide
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 326 KB |
Show table of contents
Document Outline
- Contents
- About this guide
- Cache LUN Introduction
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 245 |
| Size: | 9.06 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Continuous Access Journal Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP Continuous Access Journal Software
- 2 About XP Continuous Access Journal Operations
- Functionality Overview
- XP Continuous Access Journal Components
- Storage Systems
- XP Continuous Access Journal Software
- Logical Disk Controllers
- Main and Remote Control Units (Primary Storage Systems and Secondary Storage Systems)
- Consistency Groups
- Remote Copy Connections
- Initiator Ports and RCU Target Ports
- Journal Groups
- Data Volume Pairs
- Journal Volumes
- Host Failover Software
- XP Continuous Access Journal Remote Copy Operations
- Journal Processing
- XP Continuous Access Journal Delta Resync Operation
- Journal Obtain at XP Continuous Access Synchronous Secondary Site
- Switching the Master Journal Group of XP Continuous Access Journal
- Pair Status
- 3 Preparing for XP Continuous Access Journal Operations
- Requirements and Restrictions
- Installing the Hardware
- Configuring the Primary and Secondary Storage Systems for XP Continuous Access Journal Operations
- Using Multiple Primary and Secondary Storage Systems
- 3DC Multi-target Configuration of Three XP Continuous Access Journal Sites
- 3DC Cascading Configuration of Three XP Continuous Access Journal Sites
- Enabling the XP Continuous Access Journal Option
- Interoperability with Other Products and Functions
- LUSE
- Virtual LUN
- Cache Residency Manager
- LUN Manager
- XP Thin Provisioning
- XP Performance Control
- XP Business Copy
- XP Continuous Access Synchronous (3DC Cascading Configuration)
- XP Continuous Access Synchronous (3DC Multi-Target Configuration)
- Hardware Configuration
- Setup Procedure
- Requirements for Creating an XP Continuous Access Journal Pair for the Delta Resync Operation
- Requirements for Performing the Delta Resync Operation
- Configuring Delta Resync Operation Environment that uses Remote Command Devices
- Changing to a 3DC Multi-Target Configuration After Recovering from Primary Site Failures
- Transferring Business Tasks from an XP Continuous Access Secondary Site to the Primary Site (in a 3DC Cascading Configuration)
- Transferring Business Tasks from the XP Continuous Access Secondary Site to the Primary Site (in a 3DC Multi-target Configuration)
- Transferring Business Tasks from XP Continuous Access Secondary Site to Primary Site (When Delta Resync Operation is Performed in 3DC Multi-target Configuration)
- Recovering from Failures at the Primary Site and the XP Continuous Access Synchronous Secondary Site
- Transferring Business Tasks from the XP Continuous Access Journal Secondary Site to the Primary Site
- XP Continuous Access Synchronous (2DC Configuration)
- Basic Behavior
- Hardware Configuration
- Setup Procedure
- Restrictions About 2DC
- Changing to 2DC Configuration after Recovering from Primary Site Failures
- Data Retention Utility
- Performance Monitor
- XP Auto LUN Software
- Planning of Journal Volumes
- Factors That Determine Data Transfer Speed Between the Primary and Secondary Storage System
- Performing Remote Copy Between an XP12000/XP10000 Disk Array and an XP24000/XP20000 Disk Array
- 4 Using the XP Continuous Access Journal GUI
- 5 Configuring Storage Systems and Logical Paths
- Reviewing System Configuration Tasks
- Configuring Port Attributes
- Configuring Storage System Options
- Establishing the Relationship Between Primary and Secondary Storage Systems (Add DKC)
- Changing Options for Logical Paths and Storage Systems
- Adding Logical Paths
- Viewing the Status of Logical Paths
- Deleting Logical Paths
- Managing Power for Storage Systems and Network Relay Devices
- Removing the Relationship Between Primary and Secondary Storage Systems
- 6 Using Journal Groups
- Reviewing Administrator Tasks for Managing Journals
- Registering Journal Volumes in a Journal Group
- Deleting Journal Volumes from a Journal Group
- Displaying Detailed Information about a Journal Group
- Changing Options for a Journal Group
- Deleting a Journal Group
- Splitting a Mirror (Pairsplit-r: Suspending a Copy Operation)
- Restoring a Mirror (Pairresync: Resuming a Copy Operation)
- Deleting Data Volumes from a Mirror (Pairsplit-S: Ending a Copy Operation)
- Assigning Remote Command Devices to Mirrors
- Releasing Assigned Remote Command Device
- 7 Performing XP Continuous Access Journal Pair Operations
- Reviewing the Pair Operation Window
- Creating a Pair of Data Volumes (Paircreate)
- Displaying Detailed Information about a Pair of Data Volumes
- Changing Options for a Data Volume Pair
- Splitting a Pair of Data Volumes (Pairsplit-r)
- Restoring a Pair of Data Volumes (Pairresync)
- Releasing a Pair of Data Volumes (Pairsplit-S)
- Creating a Point-in-Time Copy of Data Volumes
- Recovering a Pinned Track
- 8 Usage Monitor Operations
- 9 Performing Disaster Recovery Operations
- Preparing for Disaster Recovery
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Multi-Target Configuration (When Delta Resync Operation is Performed)
- Recovering from Primary Site Failures in XP Continuous Access Journal 3DC Cascading configuration
- Recovering from a Failure in the Intermediate Site in a 3DC Cascading Configuration
- Recovering from a Failure by Duplicating Volumes in a 3DC Cascading Configuration
- Recovering from a Disaster in a 3DC Cascading Configurationof XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering from Primary Site Disaster in a 3DC Multi-Target Configuration
- Recovering from Primary Site Failures in 3DC Multi Target Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous (When Delta Resync Operation Is Performed)
- Recovering from a Disaster in a 2DC Configuration of XP Continuous Access Journal and XP Continuous Access Synchronous
- Recovering the Primary Site from a Failure When the System Consists of Multiple Primary and Secondary Storage Systems
- 10 Troubleshooting
- 11 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 48 |
| Size: | 359 KB |
Show table of contents
Document Outline
- Hitachi Extended Remote Copy for Mainframe user guide
- About this Guide
- 1 Overview of Copy Solutions
- 2 Overview of XRC for Mainframe Operations
- 3 Requirements and Restrictions
- 4 Preparing for XRC for Mainframe Operations
- 5 XRC for Mainframe Panels
- 6 Performing XRC for Mainframe Operations
- 7 Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 74 |
| Size: | 1.18 MB |
Show table of contents
Document Outline
- HP StorageWorks Snapshot XP user guide
- Contents
- About this guide
- 1 Overview of copy solutions
- 2 Snapshot XP functions
- 3 Requirements for Snapshot XP operations
- 4 Using Snapshot XP
- Procedure for using Snapshot XP processes
- Status of Snapshot XP pairs
- Notes on creating pools
- Notes on using Snapshot XP
- Combining Snapshot XP with other software products
- Table 8 Volume sharing with other software products
- Combining Snapshot XP with Business Copy XP
- Table 9 Snapshot XP operations when Snapshot XP P-VOL and Business Copy XP P-VOL are shared
- Table 10 Snapshot XP operations when Snapshot XP P-VOL and Business Copy XP S-VOL are shared
- Table 11 Business Copy XP operations when Snapshot XP P-VOL and Business Copy XP P-VOL are shared
- Table 12 Business Copy XP operations when Snapshot XP P-VOL and Business Copy XP S-VOL are shared
- Combining Snapshot XP with Continuous Access XP or Continuous Access XP Journal
- Table 13 Snapshot XP operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal are shared
- Table 14 Snapshot XP operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal S-VOL are shared
- Table 15 Continuous Access XP/Continuous Access XP Journal operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal P-VOL are shared
- Table 16 Continuous Access XP/Continuous Access XP Journal operations when Snapshot XP P-VOL and Continuous Access XP/Continuous Access XP Journal S-VOL are shared
- Combining Snapshot XP with Auto LUN XP
- Combining Snapshot XP with LUN Security XP Extension
- 5 Snapshot XP operations
- Displaying the Business Copy XP main pane
- Creating or deleting pools
- Creating or deleting virtual volumes
- Creating Snapshot XP pairs
- Storing snapshot data
- Restoring Snapshot XP pairs
- Deleting snapshot data
- Deleting Snapshot XP pairs
- Displaying detailed information about Snapshot XP pairs
- Displaying operation history
- 6 Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 85 |
| Size: | 748 KB |
Show table of contents
Document Outline
- Contents
- XP Performance Control
- Optimal performance of high-priority hosts
- Automatically disabling upper limit control
- Overview of XP Performance Control procedures
- Notes on using XP Performance Control
- XP Performance Control restrictions
- Using XP Performance Control
- Starting XP Performance Control
- XP Performance Control pane
- Managing traffic between HBAs and ports
- Setting the priority of ports on arrays
- Measuring traffic between host bus adapters and ports for many-to-many connections
- Analyzing traffic statistics
- Setting upper limit values for traffic at non-prioritized ports or WWNs
- Setting thresholds
- Changing PFC names of host bus adapters (many-to-many connections only)
- Replacing host bus adapters (many-to-many connections only)
- Grouping host bus adapters
- Troubleshooting XP Auto LUN/Performance Base Monitor and XP Performance Control
- Support and other resources
- XP Performance Control Export Tool
- Overview of XP Auto LUN
- Exporting monitoring data to files
- Figure 1 Sample text file
- Files to be exported
- Table 2 XP Auto LUN panes and monitoring data that can be saved by the Export Tool
- Table 3 Files containing statistics on resource usage and write pending rates
- Table 4 Files containing statistics on parity, external volume, and V-VOL groups
- Table 5 Files containing statistics on logical volumes in parity, external volume, or V-VOL groups
- Table 6 Files containing statistics on ports
- Table 7 Files containing statistics on host bus adapters connected to ports
- Table 8 Files containing statistics on LU paths
- Table 9 Files containing statistics on PFC groups
- Table 10 Files containing statistics on host bus adapters belonging to PFC groups
- Table 11 Files with statistics on remote copy ops. by Cnt Ac and TrueCopy for z/OS (in the array)
- Table 12 Files with statistics on remote copy ops. by Cnt Ac and TrueCopy for z/OS (at LU paths)
- Table 13 Files with statistics on remote copy ops. by Cnt Ac and TC for z/OS (at logical vols. by CU)
- Table 14 Files with statistics on remote copy operations by Cnt Ac and TC for z/OS (at CLPR)
- Table 15 Files with statistics on remote copy operations by Cnt Ac-J and UR for z/OS (in the array)
- Table 16 Files with statistics on remote copy ops. by Cnt Ac and UR for z/OS (at journal groups)
- Table 17 Files with statistics on remote copy ops. by Cnt Ac-J and UR for z/OS (at LU paths)
- Table 18 Files with statistics on remote copy ops. by Cnt Ac-J and UR for z/OS (at logical vols. by CU)
- Preparing for using the Export Tool
- Using the Export Tool
- Command reference
- Table 22 Subcommand list
- Command syntax
- The svpip subcommand
- The retry subcommand
- The login subcommand
- The show subcommand
- The group subcommand
- The shortrange subcommand
- The longrange subcommand
- The outpath subcommand
- The option subcommand
- The apply subcommand
- The set subcommand
- The help subcommand
- The java command for exporting data In files
- Troubleshooting the Export Tool
- Limitations for storage partition administrators
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 170 |
| Size: | 2.48 MB |
Show table of contents
Document Outline
- XP24000/XP20000 External Storage Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About XP External Storage Operations
- Connecting External Storage Systems
- XP External Storage Components
- XP External Storage Operations
- Configuring XP External Storage
- Choosing Mapping Policy
- Using a Mapped External Volume from a Connected Host
- Interoperability with other Products and Functions
- LUN Manager and Configuration File Loader
- LUN Expansion (LUSE)
- Virtual LVI/LUN (VLL)
- Cache Residency Manager
- Performance Monitor and XP Auto LUN
- XP Continuous Access and Hitachi TrueCopy™ for Mainframe
- HP StorageWorks XP Continuous Access Journal Software and Hitachi Universal Replicator™ for Mainframe
- HP StorageWorks XP Business Copy Software and Hitachi ShadowImage™ for Mainframe
- HP StorageWorks XP Snapshot Software
- HP StorageWorks XP Thin Provisioning Software
- SNMP Agent
- Examples of Using External Volumes with Other Products
- 3 Preparing for XP External Storage Operations
- System Requirements
- Guidelines for XP External Storage Operations
- Mapping Guidelines
- Recommended Applications According to HDD Type
- Capacity Guidelines
- Guidelines for Mainframe Volumes
- Volume Attribute Guidelines
- Creating LUSE Volume Guidelines
- Maintenance Guidelines for an External Storage System
- Performance and Status Guidelines
- RAID Level Considerations
- AMS 2000 Series Guidelines
- Installing and Uninstalling XP External Storage
- Starting XP External Storage
- 4 Using the XP External Storage GUI
- 5 Performing XP External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconnecting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Performing Maintenance for External Subsystem
- Editing Mapping Policy
- Deleting the External Volume Mapping (Delete Volume Command)
- 6 Using Spreadsheets for XP External Storage Operations
- Introduction
- Before Using Spreadsheets
- Available Types and Operation Tags
- Saving Storage System Information
- Mapping External Volumes
- Disconnecting an Individual External Volume (DisconnectVolume Tag)
- Resuming an Individual External Volume (CheckPath-RestoreVolume Tag)
- Deleting the External Volume Mapping (DeleteVolume Tag)
- Changing Path Group
- Example of a Spreadsheet
- 7 Remote Command Devices
- 8 Troubleshooting
- 9 Support and Other Resources
- A Connecting External Storage Systems
- AMS/WMS Storage System
- System Parameters
- Relationship between the Serial Number and the AMS/WMS Model
- Relationship between the WWN of the Port and Controller (AMS/WMS)
- Path Status and Examples of the Recovery Procedure (AMS/WMS)
- P9500 Disk Array
- Path status and examples of recovery procedure
- Notes on Using the Power Savings Option (AMS/WMS)
- Thunder 9500V Storage System
- USP V/VM Storage System
- TagmaStore USP/NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- HP StorageWorks EVA Storage System
- Sun StorEdge 6120/6320
- Sun StorageTek FlexLine 380
- Sun StorageTek 2540
- Sun StorageTek V2X2
- EMC CLARiiON CX Series
- EMC Symmetrix Series
- IBM DS3000/DS4000/DS5000 Series
- System Parameter for Connecting IBM SVC Series
- Notes on Connecting IBM XIV Series
- Fujitsu FibreCAT CX Series
- Non-HP Storage Systems
- AMS/WMS Storage System
- B Required Volume Capacity for Each Emulation Type
- C Adjusting the Volume Capacities for Pairs
- D The ExPath Tool
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 151 |
| Size: | 2.80 MB |
Show table of contents
Document Outline
- XP24000/XP20000 Remote Web Console User Guide
- Contents
- 1 About Remote Web Console Operations
- Overview of Remote Web Console
- Remote Web Console Features
- User Access Levels
- Overview of Audit Logs
- Overview of Configuration File Loader Operations
- Overview of SSL-Encrypted Communications
- Encryption Function Enhancement (Solution to the Year 2010 Encryption Problem)
- Single Sign-on from HP Systems Insight Manager
- Important Terms and Concepts
- 2 Installation Requirements and Procedures
- 3 Using the Remote Web Console GUI
- Common Elements of the Remote Web Console Main Windows
- License Key Window
- Identity Window
- Port Status Window
- Alerts Window
- Account Window
- Login Message Window
- Syslog Window
- Audit Log Transfer Window
- Audit Log Setting Window
- Encryption Window
- E-mail Information Window
- Configuration File Loader Window
- Reports Display Dialog Boxes
- Tool Panel
- Control Panel
- 4 Performing Remote Web Console Operations
- Enabling and Disabling Remote Web Console Options
- Launching the Desired Option
- Managing the User Accounts
- Reporting SIMs by Email
- Setting the Environment Parameters
- Downloading the Configuration Files
- Restoring Backups of the Configuration Files
- Downloading Trace Files Using the FD Dump Tool
- Using Configuration File Loader
- Registering and Deleting the Certificates of HP Systems Insight Manager
- 5 Using the CFL Extension
- 6 Troubleshooting
- 7 Support and Other Resources
- A Audit Logs for Single Sign-On
- B Error Codes for Single Sign-On
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 43 |
| Size: | 508 KB |
Show table of contents
Document Outline
- XP24000/XP20000 LUN Expansion User Guide
- Contents
- 1 About LUSE Operations
- 2 Preparing for LUSE Operations
- 3 Using the LUSE GUI
- 4 Performing LUN Expansion (LUSE) Operations
- 5 Using Spreadsheets for LUSE Operations
- 6 Troubleshooting
- 7 Support and Other Resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 169 |
| Size: | 2.51 MB |
Show table of contents
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting VSP Subsystem
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- IBM V7000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 131 |
| Size: | 1.61 MB |