HP StorageWorks XP Remote Web Console Software - Manual (Page 72)

72 Volume Management for the XP128/XP1024
The status of each parity group is indicated by one of the following icons.
The status of each VDEV is indicated by one of the following icons.
Parity Group - LDEV table
This table shows information about volumes in a VDEV selected in the Parity Group - LDEV tree.
The status of each LDEV is indicated by one of the following icons.
The table contains the following information:
• No.: The number of a volume in the VDEV
• CU:LDEV: A CU number/LDEV number combination. Free indicates a free space. An LDEV number that
ends with a # indicates that the LDEV is an external LU (for example, 00:01#).
• Emulation: Emulation type of the volume
• Capacity: Capacity of the volume represented in the selected unit (MB, Cyl, or block)
• Paths: Number of LU paths that the volume has. This box is blank when the volume has no LU paths.
• Access Attribute: Access attribute of the volume
• Status: Status of the volume. You must click LDEV Status to display the volume status. Table 27 describes
the volume status displayed in the Status column.
Table 24 Parity group status icons
Icon Status
Parity group
Set of concatenated parity groups
Table 25 VDEV status icons
Icon Status
No pending VSC actions
VSC actions have been stored, but not yet implemented
on the subsystem
Table 26 LDEV status icons for VSC operations
Icon Status
Normal LDEV
LUSE volume
LDEV reserved for Auto LUN
VSC volume
VSC volume reserved for Auto LUN
Free space
Table 27 Volume status
Status Description
Normal Volume is in a normal status
Blocked Volume is in a blocked status. Hosts cannot access the blocked volume.
Warning Volume has a problem.