HP StorageWorks XP Remote Web Console Software User Manual
Page 109
Figure 63 Example: FCWITHDR Command Description (for Case 1)
FCWITHDR TDEVN(X'4203')
By executing the command described in
, the relationship established with the specified
target, Dataset 3, in the device numbered 4203, is withdrawn (see
). However, the
relationship established with Dataset 4 is not withdrawn because it is specified as the dataset
source. There are two relationships before executing the command, and only one relationship after
the command is executed.
Figure 64 FCWITHDR Command Processing (TDEVN Specified, DDSW = NO) (for Case 1)
Case 2: TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
The relationships included in the extents specified by the XTNTLST parameter are withdrawn. The
relationships that are only partly included in the specified extents are not withdrawn.
is an example of the command description for Case 2. This example requests the
withdrawal of all the relationships established with the copy target extents included in the specified
extents within the device numbered 4203.
Figure 65 Example 2A: FCWITHDR Command Description (TDEVN Specified, DDSW = NO, XTNTLST
Specified)
FCWITHDR TDEVN(X'4203') XTNTLST(X'00000000' X' 03000000E' X'20000000' X' 2300000E')
In this case, the specified extents in the device numbered 4203 are contained in Dataset 3 (see
). Therefore, by executing the FCWITHDR command described in
, the
Releasing a Version 2 Relationship 109