beautypg.com

Requirements on the maximum number of pairs – HP StorageWorks XP Remote Web Console Software User Manual

Page 16

background image

16

ShadowImage for the XP128/XP1024/XP10000/XP12000

Requirements on the Maximum Number of Pairs

The number of pairs you can create depends on the emulation type and the capacity of the paired

volumes. For details, refer to the following table that shows the number of pairs that can be created with

volumes of each emulation type and capacity.
Use the following expression to calculate the total number of the differential tables per pair:

Total number of the differential tables per pair = ( (X) + (Y) ) x 15

÷

(Z)

(X): Number of the cylinders of the volume that is divided at arbitrary size.
(Y): Number of the control cylinders (see

Table 3

).

(Z): Number of slots that can be managed by a differential table.

(1,916 x 32)

Round up the number to the nearest whole number. For example, in case of a volume for which the

emulation type is 3390-3 and the number of cylinders of the divided volume is 3,390 ((X) in the preceding

expression), the calculation of the total number of the differential table is as follows:

(3,390 + 6) x 15

÷

(1,916 x 32) = 0.81836

When you round up 0.81836 to the nearest whole number, it becomes 1. Therefore, the total number of

the differential table for one pair is 1 when emulation type is 3390-3.
The following table shows the number of the control cylinders according to the emulation types.

Failures

When a failure of any kind prevents an SI390 copy operation from completing, the

pair is suspended. If an LDEV failure occurs, the pair is suspended. If a PDEV failure

occurs, SI390 pair status is not affected because of the RAID architecture.

Maintenance/Update

When the disk array maintenance is performed, or the microprogram is updated,

you may have to add SI390 pairs again.

Table 2

ShadowImage for z/OS requirements (continued)

Parameter Specification

Table 3

The Number of the Control Cylinders According to the Emulation Types

Emulation Type

Number of the Control Cylinders

3380-3

7

3380-3A

7

3380-3B

7

3380-3C

7

3380-F

22

3380-K

7

3380-KA

7

3380-KB

7

3380-KC

7

3390-3

6

3390-3A

6

3390-3B

6

3390-3C

6

3390-3R

6

3390-9

25

3390-9A

25