HP StorageWorks XP Remote Web Console Software - Manual (Page 81)

• Authentication: Specifies if authentication for the Fibre Channel switch is performed. If the Fibre
Channel switch is a target of user authentication, Enable appears. If the host is not a target of user
authentication, Disable appears.
Authentication information (Target) list
Fibre folder
Displays user information for host groups allowed to connect to the port or host group selected in the
tree.
• Group Name: Host group name.
• User Name: Host group's user name. When a user name is not defined for a host group, this
column is blank.
• Authentication: Specifies if authentication for the host is performed. If the host is a target of user
authentication, Enable appears. If the host is not a target of user authentication, Disable appears.
iSCSI folder
Displays user information for iSCSI targets allowed to connect to the port or iSCSI target selected in
the tree.
• Target Name: iSCSI target's iSCSI name.
• User Name: iSCSI target's user name. When a user name is not defined for an iSCSI target, this
column is blank.
• Authentication: Indicates whether authentication of the host is performed. If the host is a target of
user authentication, Enable appears. If the host is not a target of user authentication, Disable ap-
pears.
Authentication Information (Host) list
Fibre folder
Displays host user information for the port or host group selected in the tree.
In this list, you can register up to 64 user information items.
• Group Name: Host group name.
• User Name: Host's user names. When a user name is not defined for a host, this column is blank.
• Protocol: Protocol used in the user authentication.
iSCSI folder
Displays host user information for the port or iSCSI target selected in the tree.
In this list, you can register up to 64 user information items.
• Target Name: Host bus adapter's iSCSI name.
• User Name: Host's user name. When a user name is not defined for a host, this column is blank.
• Protocol: Protocol used in the user authentication.
Buttons
• Apply: Applies settings in the pane to the array.
XP LUN Configuration and Security Manager User Guide 81