Deleting logical paths, Figure 42 delete path pane, Viewing the status of logical paths – HP StorageWorks XP Remote Web Console Software User Manual
Page 85: 42 delete path pane
Continuous Access XP Journal user guide
85
Deleting logical paths
Before deleting logical paths, ensure that the remaining number of logical paths will be greater than the
minimum number of paths setting (see ”
Changing options for logical paths and disk arrays
The delete path operation fails if the number of remaining paths is equal to or less than the minimum
number of paths.
The primary and secondary disk array administrators can perform the following procedure:
1.
Ensure that the Command View XP or XP Remote Web Console main pane is in Modify mode. For
more information, see the HP StorageWorks Command View XP User Guide for XP Disk Arrays or the
HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000.
2.
Ensure that the DKC Operation pane is displayed (”
Displaying the DKC Operation pane
3.
In the Switch Display box, select DKC.
4.
Do one of the following:
• In the tree, select a remote disk array.
• In the list, select and right-click a remote disk array, and select Edit Path(s). The list displays
information about logical paths.
5.
In the list, select the logical paths you want to delete.
6.
Right-click the list, and select Delete Path. A confirmation message appears.
7.
Click OK to close the message.
8.
In the DKC Operation pane, locate the upper-right list and the Preset list, and check the settings you
made.
• The right-most column of the upper-right list displays Delete to indicate logical paths to be deleted.
• The Preset list displays logical paths to be deleted.
• To cancel deleting logical paths, select and right-click the logical paths in the Preset list, and select
Cancel.
9.
Click Apply to delete the logical paths.
NOTE:
If an error occurs, the right-most column of the Preset list displays the error code. To view detailed
information about the error, right-click the error code, and select Error Detail. An error message appears
providing detailed information about the error.
Figure 42
Delete Path pane
Viewing the status of logical paths
The DKC Status pane displays the status of logical paths.