HP StorageWorks XP Remote Web Console Software - Manual (Page 87)

LUN Configuration and Security Manager XP user guide for the XP128/XP1024 87
2. Right-click any part of the Parity Group - LDEV tree and select Volume Initialize. The Volume Initialize
pane is displayed.
Figure 47 Volume Initialize pane
Use this pane to initialize custom volumes other than OPEN-V. The top area is the CV setting
information area and shows detailed information about the custom volumes to be initialized. The
bottom area is the LDEV number setting area and is used to set the CU and LDEV numbers for the
custom volume to be initialized.
3. In the CV setting information area at the top of the pane, select one or more custom volume numbers.
4. In the Select CU No. list, select a CU number. The LDEV number setting area is updated to reflect the
selected CU number.
5. In the LDEV number setting area, select an LDEV number by clicking the appropriate white box. For
example, to select an LDEV number of 16, click the +10/+6 box as shown in Figure 48 .