Deleting host bus adapters from host groups, Deleting old wwns from the wwn list – HP StorageWorks XP Remote Web Console Software User Manual
Page 60
Figure 40 Dialog Box that Displays the Host Bus Adapters to be Changed
Deleting Host Bus Adapters from Host Groups
To delete an HBA from a host group:
1.
Start LUN Manager and display the LUN Manager window (
).
2.
In the tree, select and right-click a host bus adapter ( ).
A pop-up menu appears.
3.
Select Delete WWN from the pop-up menu.
A message appears, asking whether you want to delete the host bus adapter (WWN).
4.
Click the YES button to close the message.
5.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
6.
Click the OK button to close the message.
The settings are applied to the storage system.
Deleting Old WWNs from the WWN List
If you disconnect a host that has been connected via a cable to your storage system, the WWN
for the host will remain in the WWN list of the LUN Manager window. To delete the WWN from
the WWN list, take the following steps:
1.
Start LUN Manager and display the LUN Manager window (
).
2.
In the WWN list, locate WWNs that are not registered in any host group. If the host group
column is blank, the WWN is not registered in any host group. Next, from these WWNs,
select the WWN that you want to delete, and then right-click the selection.
A pop-up menu appears.
3.
Select Erase WWN from the pop-up menu.
4.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
5.
Click the OK button to close the message.
The settings are applied to the storage system.
60
Performing LUN Manager Operations