HP StorageWorks XP Remote Web Console Software User Manual
Page 25
25
• quick restore mode of the
pairresync -restore
command
• At-Time Split function
•
You cannot perform write operations on a P-VOL when the P-VOL is in PSUS status and the S-VOL is in
COPY status. However, if you execute the
pairdisplay
command from RAID Manager XP, the
M
column displays
W
(read/write enabled) for the P-VOL.
•
You cannot perform write operations on a P-VOL when the P-VOL is in PSUS status and the S-VOL is in
SSUS status. However, if you execute the
pairdisplay
command from RAID Manager XP, the
M
column displays
W
(read/write enabled) for the P-VOL.
•
If you execute the
raidscan
command for volumes configuring the Flex Copy XP pair, and if paths for
these volumes are not set, the status of the P-VOL and S-VOL appears as
SMPL
. When using RAID
Manager XP for the Flex Copy XP pair operation, you must set paths for the volumes.
•
When creating a pair using an external LU that is mapped as an internal LU, the local array
automatically decides whether to use Flex Copy XP or Business Copy XP depending on the mapped
volumes’ attributes. Since Flex Copy XP and Business Copy XP differ in the connection configuration for
the server and array, you must be careful with the attributes for the volume that creates the copy pair.
When creating a Flex Copy XP pair, a server connected to the external array can read from and write
to the external LU. However, if the server is also connected to the local array, the server cannot read
from and write to the internal LU mapped to the external LU.
shows the connection
configuration of the server and arrays when creating the Flex Copy XP pair.
Figure 14
Connection configuration when using Flex Copy XP
When creating a Business Copy XP pair, a server connected to the local array can read from and
write to the internal LU mapped to the external LU. However, if the server is also connected to the