HP StorageWorks XP Remote Web Console Software - Manual (Page 201)

• LDEV information table: Displays the following information about the CVS volume settings:
• No.: CVS volume's setting number.
• Emulation: CVS volume's emulation type (OPEN-V).
• Capacity: CVS volume's capacity displayed in the unit selected from the Capacity Unit list.
• available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs
for RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.
• Capacity Unit: Unit the CVS volume's capacity is displayed in.
• MB: Megabytes (MB). This unit is used for specifying the capacity of open-system volumes.
• Cyl: Cylinders (Cyl). This unit is used for specifying the capacity of mainframe volumes.
NOTE:
This unit can also be used for specifying the capacity of OPEN-V volumes.
• Block: Blocks. This unit is used for specifying the capacity of external LUs. For more information
about external LUs, see the HP StorageWorks External Storage XP user guide.
• Specify capacity and number: Capacity and number of CVs in the CVS volume you want to create.
• Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available
capacity range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB, 50
- 7168 Cyl, or 315 - 8513 blocks). The value can be incremented by 1 MB, cylinder, or block.
• Number: Number of volumes of that size. The available range is shown on the right (for ex-
ample, 1 - 489).
• Divide free space by number: Used to create CVS volumes by specifying the number of CVs in the
CVS volume to be created.
• Number: Number of CVs in the CVS volume. If you select this option, the available range is
shown on the right (for example, 1 - 47).
• Divide free space by capacity: Used to create CVS volumes by specifying the capacity of CVs in
the CVS volume to be created.
• Capacity: Capacity of the CVS volumes to be created. The available capacity range (minimum
- maximum) is shown below Capacity (for example, 46 - 6720 MB, 50 - 7168 Cyl, or 315 -
8513 blocks).
• Set remaining space as volume: Used to create a CVS volume using the remaining space in the
VDEV.
• Set: Displays the selected settings in the LDEV information table on the left.
• Delete: Deletes the settings for CVS volumes selected in the LDEV information table.
• Clear: Deletes all the settings in the LDEV information table.
• Next: Displays the Install CV pane (2).
• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.
Install CV pane (1) for other than OPEN-V
Figure 93 shows the Install CV pane (1) for emulation types other than OPEN-V.
XP LUN Configuration and Security Manager User Guide 201