Figure 77 – HP StorageWorks XP Remote Web Console Software User Manual
Page 161
Continuous Access XP Journal user guide 161
For example, in
, 11, 12, and 13 are LUs constituting the file system sample. Their LDEV
numbers are 64, 12, and 66.
Figure 76
Command execution that lists LUs constituting the file system sample
The device file and device names of the LU entry (line) you want to control using RAID Manager XP are
changed to an appropriate name. In changing the device file and device names, observe the following:
•
The same device group and device names must be specified to volumes to be paired in the primary
and secondary sites. Specify the device group and device names accordingly.
•
The same device group name must be specified as LUs constituting one file system. If NAS Sync Image
manages the file system, the same device group name must be specified as LUs constituting a file
system and as LUs constituting differential-data storage devices.
Figure 77
Example 2: RAID Manager XP configuration definition file (for instance number 16)
Next, specify the IP address of the instance to be paired in the secondary site for the
HORCM_INST
section
(see
). Specify the IP addresses of the instances in both CL1 and CL2 for a failover
between NAS packages in the secondary site.
$ sudo horc_devlist | grep ':sample$'
11( 17) 64 OPEN-V(3.906GB) -- -- Normal Own File:sample
12( 18) 12 OPEN-V(3.906GB) -- -- Normal Own File:sample
13( 19) 66 OPEN-V(3.906GB) -- -- Normal Own File:sample
HORCM_MON
#ip_address service poll(10ms) timeout(10ms)
123.456.78.51 20331 1000 3000
HORCM_CMD
#dev_name dev_name dev_name
#UnitID 0 (Serial# 62486)
/dev/sdf
HORCM_DEV
#dev_group dev_name port# TargetID LU# MU#
# /dev/sdt SER = 62486 LDEV = 10 [ FIBRE FCTBL = 3 ]
VG VG_010 CL1-A-1 0 10
# /dev/sdu SER = 62486 LDEV = 64 [ FIBRE FCTBL = 3 ]
VG VG_011 CL1-A-1 0 11
# /dev/sdv SER = 62486 LDEV = 12 [ FIBRE FCTBL = 3 ]
VG VG_012 CL1-A-1 0 12
# /dev/sdw SER = 62486 LDEV = 66 [ FIBRE FCTBL = 3 ]
VG VG_013 CL1-A-1 0 13
HORCM_INST
#dev_group ip_address service
VG 127.0.0.1 52323
Table 30
Configuration definition file settings (HORCM_INST) and specified values in NAS Blade system
Section name
Item
Specified values in NAS Blade system
HORCM_INST
ip_address
Fixed IP address of eth1 or eth2 in the NAS package in Continuous Access
XP Journal’s secondary site
(But if you specify
eth1
in
HORCM_MON ip_address
, specify
eth1
. If
you specify
eth2
in
HORCM_MON ip_address
, specify
eth2
.)
service
20331 (instance number 16) or 20332 (instance number 17)