Calling hp technical support – HP StorageWorks XP Remote Web Console Software User Manual
Page 86
Table 16 Error Code and Error Contents When Operating XP RAID Manager (continued)
Solution
Error Contents
Error Code (SSB2)
Error Code (SSB1)
When increasing capacity,
make sure that the ratio of free
space in the pool to free space
in the V-VOL is not below the
V-VOL threshold. For details,
see the conditions for
increasing the V-VOL capacity
in
.
Because the ratio of the free
space capacity of the pool to
the free space capacity of the
V-VOL was less than the
V-VOL threshold, the
operation was rejected.
0xaf2d
0xb96b
Wait until formatting of the
specified volume is finished, or
see
with Other Products” (page 18)
and confirm whether the V-VOL
is used with the application
that the V-VOL capacity cannot
be increased.
Because the specified V-VOL
was used by another
application or was being
formatted, the operation was
rejected.
0xaf2e
0xb96b
Re-execute the operation after
the microcode is replaced.
Because the V-VOL capacity
was increased when the
microcode was replaced, the
operation was rejected.
0xaf2f
0xb96b
Calling HP Technical Support
If you need to call HP technical support, make sure to provide as much information about the
problem as possible, including:
•
The circumstances surrounding the error or failure
•
The exact content of any error messages displayed on the host systems
•
The exact content of any error messages displayed by Remote Web Console
•
The Remote Web Console configuration information (use the FD Dump Tool)
•
The service information messages (SIMs), including reference codes and severity levels,
displayed by Remote Web Console
For worldwide technical support information, see the HP support website:
86
Troubleshooting