About this guide, Intended audience, Prerequisites – HP StorageWorks XP Remote Web Console Software User Manual
Page 9
Continuous Access XP Journal user guide
9
About this guide
This guide provides information about:
•
Understanding copy solutions
•
Understanding Continuous Access XP Journal
•
Understanding operation requirements and restrictions
•
Installing hardware
•
Enabling Continuous Access XP Journal options
•
Planning journal volumes
•
Configuring primary and secondary disk arrays
•
Combining Continuous Access XP Journal with other data management functions
•
Configuring disk arrays and logical paths
•
Using journal groups
•
Performing Continuous Access XP Journal pair operations
•
Monitoring remote copy operations
•
Viewing history of data volume pair operations
•
Performing optional operations
•
Performing disaster recovery operations
•
Troubleshooting Continuous Access XP Journal
•
Powering on and off disk arrays and network relay devices
•
Recovering pinned tracks
•
Using SIMs
Intended audience
This guide is intended for customers and HP-authorized service providers with knowledge of the following:
•
Disk array hardware and software
•
Data processing and RAID storage subsystems and their basic functions
NOTE:
The functions described in this manual may be limited, depending on your assigned level of user
access. Some users will have read-only access while others will have limited or full array access. For
additional information on users and user groups, please see the HP StorageWorks XP Remote Web
Console User Guide.
Prerequisites
Prerequisites for using this product include:
•
Installation of the HP StorageWorks disk array(s)
•
Installation of the license key for this product