Viewing a list of alternate paths – HP StorageWorks XP Remote Web Console Software User Manual
Page 80
c.
Right-click the copy destination port.
d.
Select Paste from the pop-up menu. If a message appears and asks if you want to continue
the operation, click OK.
NOTE:
You cannot paste paths to initiator ports.
To copy one or more (but not all) LU paths defied to a host group, take the following steps:
a.
Select the host group from the tree.
b.
From the LU Path list on the right, select one or more LUNs to which volumes are assigned.
If a volume is assigned to a LUN, the columns on the right of the LUN column are not
empty.
c.
Right-click the selection and then select Copy Paths from the pop-up menu.
The selected LUNs turn green.
d.
Double-click the copy destination port to display host groups below the port.
e.
Right-click the host group to which you want to paste paths. Next, select Paste Paths from
the pop-up menu. If a message appears and asks if you want to continue the operation,
click the OK button.
NOTE:
You cannot paste paths to host groups for initiator ports.
4.
Click Apply in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
5.
Click the OK button to close the message.
The settings are applied to the storage system.
Viewing a List of Alternate Paths
To view a list of alternate paths:
1.
Start LUN Manager and display the LUN Manager window (
).
2.
Do one of the following:
•
In the LU Path list, select a LUN, right-click the selected LUN, and then select Alternate
Paths from the pop-up menu. If nothing is displayed in the table cells to the right of the
LUN, no path is defined to the LU. Therefore, no alternative path is defined to the LU.
•
In the LDEV list, select a logical volume (that is, an LDEV), right-click the selected volume,
and then select Alternate Paths from the pop-up menu. If nothing is displayed in the Paths
column for a row in the LDEV list, no alternate paths are defined to that LDEV.
When you finish the operation, the Alternate Paths dialog box appears and displays a list of
alternate paths (
). In the Alternate Paths dialog box, each table row indicates an
alternate path.
80
Performing LUN Manager Operations