HP StorageWorks XP Remote Web Console Software - Manual (Page 43)

Flex Copy XP user guide 43
• Time: Date and time (YYYY/MM/DD hour/min/sec) the Flex Copy XP pair or volume operation was
performed. If the acquired information is not appropriate, an asterisk (*) appears.
• P-Vol: CU:LDEV number of the P-VOLs used for the Flex Copy XP pair operation.
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. If the
acquired information is not appropriate, an asterisk (*) appears.
• S-Vol: CU:LDEV number of the S-VOLs used for the pair operation.
NOTE: If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. If the
acquired information is not appropriate, an asterisk (*) appears.
• Code: Flex Copy XP reference code.
• Message: Message informing you of the condition of the Flex Copy XP pair operation according to the
code ( Table 8 ).
Table 8 Reference codes, messages, and message descriptions
Code Message Attributes Description
0 PENDING START Starting copy processing Copy processing was started from the
PENDING status.
1 SP-PEND START Copy processing was started from the
SP-PEND status.
2 RESYNC[P->S] START Copy processing from the P-VOL to the
S-VOL was started from the RESYNC
status.
3 RESYNC[S->P] START Copy processing from the S-VOL to the
P-VOL was started from the RESYNC
status.
4 PENDING FINISH Normal termination of copy
processing
Copy processing started with the
PENDING status was terminated
normally.
5 SP-PEND FINISH Copy processing started with the
SP-PEND status was terminated
normally.
6 RESYNC[P->S] FINISH Copy processing from the P-VOL to the
S-VOL started with the RESYNC status
was terminated normally.
7 RESYNC[S->P] FINISH Copy processing from the S-VOL to the
P-VOL started with the RESYNC status
was terminated normally.
8 PENDING ERROR Abnormal termination of copy
processing
Copy processing started with the
PENDING status was terminated
abnormally.
9 SP-PEND ERROR Copy processing started with the
SP-PEND status was terminated
abnormally.
10 RESYNC[P->S] ERROR Copy processing from the P-VOL to the
S-VOL started with the RESYNC status
was terminated abnormally.
11 RESYNC[S->P] ERROR Copy processing from the S-VOL to the
P-VOL started with the RESYNC status
was terminated abnormally.