The preset volume list box, Flashcopy information pane, R to – HP StorageWorks XP Remote Web Console Software User Manual
Page 48: The preset, Volume list box
48
ShadowImage for the XP128/XP1024/XP10000/XP12000
The Preset Volume List Box
The Preset Volume List box is located below the Volume List box, and lists the specified zSeries and S/390
operations (volume/pair information) that have not been performed in the
XP128/XP1024/XP10000/XP12000.
NOTE:
You can use the Preset Volume List box to hold multiple settings of the same operation (for
example, Add Pair) only. You cannot display different types of operations (for example, Split Pair and
Resync Pair) in the Preset Volume List box at the same time. You can also cancel the operations in the Preset
Volume List box.
Figure 21
Preset Volume List box displaying settings (operations)
The Preset Volume List box displays the following information of specified operations:
•
Source Vol: The CU:LDEV (control unit image:logical device ID) of the S-VOL.
•
Target Vol: The CU:LDEV (control unit image:logical device ID) of the T-VOL.
•
Copy Pace: The copying pace for all pairs being created: Slower, Medium, and Faster.
•
CLPR (S): The cache logical partition (CLPR) of the S-VOL.
•
CLPR (T): The cache logical partition (CLPR) of the T-VOL.
•
Code: The reason code is displayed if the preset operations (settings) cannot be applied successfully
with the Apply button.
To perform the specified operations, click Apply on the ShadowImage main window. When all the
operations are performed successfully, the Preset Volume List box will be cleared. However, if some
operations cannot be performed successfully, the failed operations will remain in the Preset Volume List
box, and the error icon (
) is displayed. You can also cancel one or all operations by using the following
pop-up menu commands:
•
The Delete command cancels the selected operation only.
NOTE:
To display the Delete command, select a volume or pair, and then right-click to display the
pop-up menu.
•
The Delete All command cancels all operations displayed in the Preset Volume List box.
NOTE:
To display the All Delete command, deselect any volume or pair, and then right-click to
display the pop-up menu.
•
The Detail command displays the Error window, which displays the error code and message for the
failed operation (see ”
FlashCopy Information Pane
The FlashCopy Information pane displays information about resources, such as total and remaining
number of relationships and differential tables that can be used for FlashCopy Mirror Version 2 operation,
or information about FlashCopy Mirror Version 2 relationships. Use this information to calculate the
number of FlashCopy Mirror Version 2 relationships that can be established. To open the FlashCopy