HP StorageWorks XP Remote Web Console Software - Manual (Page 57)

XP Performance Control user guide 57
Example
In the following command file, the interval between retries is five minutes and the maximum number of
retries is 10.
The login subcommand
Syntax
login
useridpassword
Description
The login subcommand uses a user ID and password to log the specified user in the SVP.
The svpip subcommand must execute before the login subcommand executes.
The login subcommand fails if monitoring data does not exist in the SVP.
Operands
userid
Specifies the user ID for the SVP.
If the user ID includes any non-alphanumeric character, the user ID must be enclosed by double
quotation marks (").
NOTE: Be sure to specify a user ID that should be used exclusively with the Export Tool. For
detailed information, see ” Requirements for using the Export Tool ” on page 45.
password
Specifies the password of the user.
If the password includes any non-alphanumeric character, the password ID must be enclosed by
double quotation marks (").
Example
This example logs the user expusr into the SVP whose IP address is 158.214.127.170. The password
is pswd.
The show subcommand
Syntax
show
Description
The show subcommand outputs the following information to the standard output (for example, to the
command prompt):
svpip 158.214.135.57
retry time=5 count=10
login expusr passwd
show
group Port
shortrange 200404010850:200404010910
outpath out
option compress
apply
svpip 158.214.127.170
login expuser pswd