HP StorageWorks XP Remote Web Console Software User Manual
Page 119
Continuous Access XP Journal user guide 119
In the following cases, this column is blank:
• When the volume in the local is not a primary or secondary data volume.
• CLPR: Number and name of the CLPR where the data volume belongs.
•
Used Volume: Size of used volumes and licensed capacity. For example, if 12.34 (15.00) (TB) is
displayed, the licensed capacity for Continuous Access XP Journal is 15.0 terabytes, and
12.34 terabytes of volumes are used.
•
Total Pairs: Current total number of data volume pairs.
•
Preset: Detailed information about operations that will occur when you click Apply.
• List: Displays changes made in the pane. When you change settings in the pane, the changes are
displayed in the Preset list before being applied to the arrays. If you are sure that information in the
Preset list is correct, click Apply to apply the settings you made.
NOTE:
When the Preset list displays the changes made, you can only perform the same type of
operation you have been doing and cannot perform most other operations. You can only view
detailed information about pairs even when the Preset list displays changes. For example, if you are
trying to delete pairs and the Preset list displays the pairs you want to delete, you cannot perform
any other operations, such as splitting or restoring pairs.
• Operation: Operation that will occur when you click Apply.
• Paircreate: Creates pairs
• Pairsplit-r: Splits pairs
• Pairresync: Restores pairs
• Pairsplit -S: Deletes pairs
• Change Pair Option: Changes pair options
• Blank: Nothing occurs when you click Apply.
• Preset: The number to the left of the slash (/) indicates the number of items displayed in the Preset
list. The number to the right of the slash indicates the maximum number of items that can be
displayed in the Preset list. For example, if Preset 010/1096 is displayed, you can add another
4,086 items to the Preset list.
•
Apply: Applies settings in the Preset list to the arrays.
•
Cancel: Cancels settings in the Preset list.
NOTE:
Information on the Pair Operation pane is updated when you do one of the following:
•
Select another tab, and reselect the Pair Operation tab.
•
Click Refresh (
) (top right of Command View XP or XP Remote Web Console pane).
•
Click Apply.
•
Select Modify mode when you are in View mode.
Filtering information in the list on the Pair Operation pane
Use the Display Filter pane to filter information in the list on the Pair Operation pane. The list displays only
volumes that satisfy certain conditions.
1.
In the Pair Operation pane (
), click Display Filter.
2.
In the Display Filter pane, specify information you want to display in the list.
3.
Click Set to close the Display Filter pane.
NOTE:
•
To restore the list to the default status (that is, the status before filtering), click Reset in the Display Filter
pane, and click Set in the same pane.