HP StorageWorks XP Remote Web Console Software - Manual (Page 69)

Continuous Access XP Journal user guide 69
3. Use the primary volume at the primary site to resume the business tasks.
Figure 32 Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC
cascading configurations)
Transferring business tasks from Continuous Access XP secondary sites to primary sites (in 3DC
multi-target configurations)
If you remove failures from the primary site and other locations and the system changes to a 3DC
multi-target configuration (see” Recovering from primary site failures ” on page 66 and ” Changing to 3DC
multi-target configurations after recovering from primary site failures ” on page 67), you can transfer the
business tasks back to the primary site.
To transfer the business tasks back to the primary site:
1. Use RAID Manager to delete the current Continuous Access XP Journal pair, which extends between the
Continuous Access XP secondary site and Continuous Access XP Journal secondary site.
2. Stop the business tasks at the Continuous Access XP Synchronous secondary site.
3. Use RAID Manager to execute the
horctakeover
command on the Continuous Access XP
Synchronous pair.
4. Use the primary volume at the primary site to resume the business tasks.
5. Use RAID Manager to create a Continuous Access XP Journal pair. Ensure that the Continuous Access
XP Journal primary data volume is a volume at the primary site, and the Continuous Access XP Journal