HP StorageWorks XP Remote Web Console Software User Manual
Page 132
Table 68 Information Displayed By the FLASHCPY QUERY RELATIONS Command (continued)
Meaning
Displayed content
Displayed item
The relationship is in the status that
cannot identify the type of Preserve
U
Mirror FlashCopy function (Preferred or
Required), because the M-VOL and
R-VOL of TCz are mixed.
Displays the starting CCHH of the extent
of the copy source.
CCHH number
START OF EXTENT(SOURCE)
Displays the starting CCHH of the extent
of the copy target.
CCHH number
START OF EXTENT(TARGET)
Displays the number of tracks in the
relationship.
Number of tracks
# CONTIG TRKS IN EXTENT
Displays the number of tracks that are
not finished copying in the relationship.
Number of tracks
# TRACKS YET TO BE COPIED
Displays the SSID (storage system ID)
of the storage system where the
relationship belongs.
Storage system ID
SSID
Displays the CU number of the volume
where the relationship exists.
CU number
LSS
Displays the CU number of the volume
where the relationship exists.
Device number
CCA
The contents displayed in the ADDRESSED VOLUME INFORMATION is the information on the
relationships in the volume to which the FLASHCPY QUERY RELATIONS command is issued. The
contents displayed in the PARTNER VOLUME INFO is the information on the volume that has the
relationships paired with the relationships in the volume to which the FLASHCPY QUERY
RELATIONS
command is issued.
You can judge whether the Restore function or the Reverse Restore function can executed by the
result of the FLASHCOPY QUERY RELATIONS command.
When the result meets the following requirement, the Restore function can be executed:
•
CRA=T
When the result meets all the following requirements, the Reverse Restore function can be executed.
•
BCE=T
•
BCP=F
•
CRA=T
•
#TRACKS YET TO BE COPIED=0
However, if the S-VOL or T-VOL is an external volume, the Reverse Restore function cannot be
executed.
Viewing Relationship Status of Version 2 Using the ANTRQST Macro Command
shows the parameters you can use with the ANTRQST Macro command.
Table 69 Parameters for the ICKDSF Command (in Version 2)
Description
Value
Parameter
Command
Specifies the number (device
address) of the device on
Device number
DEVN
REQUEST=FCQUERY
132
Performing Version 2 Operations