HP StorageWorks XP Remote Web Console Software - Manual (Page 117)

Continuous Access XP Journal user guide 117
• Port-G-ID-LUN: Logical volumes in the local array. The icons are:
To the right of the icon appears information about an LU path, which is a path from hosts to the
logical volume.
Figure 51 Information in Port-G-ID-LUN column on the Pair Operation pane
NOTE: If a logical volume is an external LU, # appears after the LDEV number. For more
information about external LUs, see the HP StorageWorks External Storage XP user guide.
• Status: Status of volume pairs.
• JNLG-MirrorID: Journal group number and mirror ID. The number on the left of the hyphen (-) is a
journal group number. The number on the right of the hyphen is a mirror ID.
This column is blank if the volume in the local array is not a primary or secondary data volume.
• S/N(CTRLID): Remote array’s serial number and controller ID. The controller ID is enclosed by
parentheses.
Volume is not paired with any other volume.
Volume is not a primary or secondary data volume.
Volume is a primary data volume.
Volume is a secondary data volume.
1 Port that receives read and write requests from hosts. In Figure 51 , read and write requests are sent to the
logical volume via the CL3-E port.
2 Group number of the host group or iSCSI target. A host group or iSCSI target is a group of hosts that issue
read and write requests.
3 LUN (logical unit number).
4 Logical volume ID. The number on the left of the colon is a CU number. The number on the right of the colon
is an LDEV number.
SMPL The volume is not currently assigned to a pair. When the initial copy is started by a paircreate
operation, the volume status changes to COPY.
COPY An initial copy operation is in progress. Data in the primary data volume is not synchronized
with data in the secondary data volume. When the initial copy is complete, the status
changes to PAIR.
PAIR The volume is paired with another volume. The two volumes are fully synchronized. All
updates from the host to the primary data volume are duplicated at the secondary data
volume.
PSUS You split the pair (pairsplit-r) or deleted the pair from the secondary array (pairsplit-S). The
primary and secondary data volumes are not synchronized.
PSUE The pair was split by the primary or secondary array due to an error or failure. The primary
and secondary data volumes are not synchronized.
Suspending The primary and secondary data volumes are not synchronized. This pair is in transition from
the PAIR or COPY status to the PSUS/PSUE status.
Deleting The primary and secondary data volumes are not synchronized. This pair is in transition from
the PAIR, COPY, or PSUS/PSUE status to the SMPL status.