HP StorageWorks XP Remote Web Console Software - Manual (Page 90)

Establishing Version 2 Relationships by Volumes Using the ICKDSF Command
(page 90) lists the parameters you can use with the ICKDSF command when you establish Version
2 relationships by volumes.
Table 52 Parameters for the ICKDSF Command (Version 2/Volume Copying)
Description Value Parameter Command
Specifies the JCL statement
identifying the volume. If the JCL statement DDNAME or DNAME FLASHCPY ESTABLISH
OS of the host server is
MVS, this parameter or the
UNITADDRESS parameter is
required.
Specifies the SYSNAME in
the ASSGN system control SYSNAME SYSNAME
statement. If the OS of the
host server is VSE, this
parameter is required.
Specifies the device number
(device address) of the Source device number UNITADDRESS, UNITADDR,
or UNIT
S-VOL on which you want to
perform the FLASHCPY
ESTABLISH
command. If
the OS of the host server is
MVS, this parameter or the
DDNAME parameter is
required.
Specifies the CU number,
LDEV number, and device CU number
LDEV number
TARGETVOL or TGTVOL
number (device address) of
Target device number
the T-VOL on which you
want to perform the
FLASHCPY ESTABLISH
command. This parameter is
required.
Establishes the relationship
which covers the entire YES CHANGERECORDING,
CHANGERCD, or CHRCD
volume. The relationship will
be maintained even after the
background copying process
is completed, and if the
S-VOL and the T-VOL are
updated, the updated part
will be managed as the
differential data.
Even when the relationship
is maintained after the NO
background copying process
is completed, the T-VOL can
be written.
Default setting of this
parameter is NO.
Establishes the relationship
which covers the entire COPY MODE
volume, and execute the
background copying
process.
The default setting of this
parameter is COPY.
90 Performing Version 2 Operations