beautypg.com

Figure 87 – HP StorageWorks XP Remote Web Console Software User Manual

Page 167

background image

Continuous Access XP Journal user guide 167

Figure 87

Example of RAID Manager XP configuration definition file at secondary site (instance 17)

Setting the RAID XP Manager user environmental variable

In the following procedure, the environment variables

HORCMINST

and

HORCC_MRCF

are corrected

corresponding to a system configuration. This setup is performed on the four nodes (CL1 and CL2 of the

cluster to which the Continuous Access XP Journal P-VOL is connected, and CL1 and CL2 of the cluster in

which the S-VOL is used).

1.

At both sites, set up the environment variable of the RAID Manager XP instance:

sudo horc_setenv HORCMINST 16

(for instance number 16)

sudo horc_setenv HORCMINST 17

(for instance number 17)

2.

At both sites, set up the

HOMRCF

command environment variable of the RAID Manager XP as

Continuous Access XP Journal:

sudo horc_unsetenv HORCC_MRCF

3.

If you logged in to the target NAS package using SSH and set up as explained in

step 1

and

step 2

,

confirm the setup by logging out of the NAS package and then logging back in:

exit

ssh {-1|-2} nasroot@fixed-IP-address-of-the-NAS-package

HORCM_MON

#ip_address service poll(10ms) timeout(10ms)

123.456.80.51 20332 1000 3000

HORCM_CMD

#dev_name dev_name dev_name

#UnitID 0 (Serial# 62490)

/dev/sdf

HORCM_DEV

#dev_group dev_name port# TargetID LU# MU#

# /dev/sdt SER = 62486 LDEV = 10 [ FIBRE FCTBL = 3 ]

VG_TC VG_032 CL1-A-1 0 10

# /dev/sdu SER = 62486 LDEV = 64 [ FIBRE FCTBL = 3 ]

VG_TC VG_033 CL1-A-1 0 11

# /dev/sdv SER = 62486 LDEV = 12 [ FIBRE FCTBL = 3 ]

VG_TC VG_034 CL1-A-1 0 12

# /dev/sdw SER = 62486 LDEV = 66 [ FIBRE FCTBL = 3 ]

VG_TC VG_035 CL1-A-1 0 13

# /dev/sdan SER = 62486 LDEV = 30 [ FIBRE FCTBL = 3 ]

VG_SI VG_014 CL1-A-1 0 30

# /dev/sdao SER = 62486 LDEV = 84 [ FIBRE FCTBL = 3 ]

VG_SI VG_015 CL1-A-1 0 31

# /dev/sdap SER = 62486 LDEV = 41 [ FIBRE FCTBL = 3 ]

VG_SI VG_016 CL1-A-1 0 32

# /dev/sdaq SER = 62486 LDEV = 86 [ FIBRE FCTBL = 3 ]

VG_SI VG_017 CL1-A-1 0 33

HORCM_INST

#dev_group ip_address service

VG_TC 123.456.78.51 20331

VG_TC 123.456.78.115 20331

VG_SI 123.456.80.51 20331

VG_SI 123.456.80.115 20331