HP StorageWorks XP Remote Web Console Software - Manual (Page 44)

44 Flex Copy XP copy operations
NOTE: The SP-PEND status means the copy pair status is moving towards the Split status. Copy
processing is in progress in the background.
• Previous button: Returns to the previous page of the history list. This button is available only when the
number of records exceeds 1,024.
• Next button: Displays the next page of the history list. This button is available only when the number of
records exceeds 1,024. The maximum number of records that can be stored is 8,192.
• Refresh button: Updates displayed records.
• Close button: Closes the Flex Copy History pane.
Canceling copy pairs (Delete Pair)
Use the Delete Pair command for canceling copy pair operations.
CAUTION: You cannot cancel a copy pair if the pair is in PSUS (SP) status. Wait until copy processing
finishes or set the pair status to PSUE from RAID Manager XP, and then cancel the copy pair.
1. On the Flex Copy XP pane, select the CU number of the P-VOL for the copy pair you want cancel from
the CU tree. The selected CU’s volumes appear in the P-Vol column of the pair list. An # appears next
to the internal LU number where the external LU is mapped.
2. Select External Volumes or Internal Volumes (lower right in the pair list) according to the copy pair
you want to cancel. Copy pair statuses appear in the pair list corresponding to the selected option.
3. Right-click the row of the copy pair you want to cancel, and select Delete Pair. The selected row
appears in blue and italics in the pair list. The selected copy pair also appears in the Preset list.
To check a setting’s details, right-click the setting in the Preset list, and select Detail. To cancel the
setting, right-click the setting in the Preset list, and select Delete.
4. Click Apply. A confirmation message appears.
5. Click OK. The copy pair selected in the pair list is canceled.
12 RELEASE Release Copy processing was released.
13 STOP Stop Copy processing was stopped.
When Flex Copy XP is operated with
RAID Manager XP, this message
indicates the pairsplit-E status.
14-30 – (Reserve) Codes reserved for future use.
31 SP-PEND SKIP Debug information SP- PEND status was skipped.
Table 8 Reference codes, messages, and message descriptions (continued)
Code Message Attributes Description