HP StorageWorks XP Remote Web Console Software User Manual
Page 112
4202, Dataset 6 is not withdrawn. In short, there are three relationships before executing the
FCWITHDR
command shown in
, and after executing the command, there are only two
relationships.
Figure 70 FCWITHDR Command Processing (SDEVN and TDEVN Specified, DDSW = NO) (for Case
3)
Case 4 (a, b): SDEVN and TDEVN Specified, DDSW = NO, XTNTLST Parameter Specified
Among the relationships established between the source device specified by SDEVN and the target
device specified by TDEVN, the relationships included in the extents specified by the XTNTLST
parameter are withdrawn. The relationships that are only partly included in the specified extents
are not withdrawn.
Even when the FCWITHDR command set as: SDEVN and TDEVN specified, DDSW = NO, and
XTNTLST parameter specified is executed, this command will do nothing and will end normally.
Either the copy source or target extent specified by the XTNTLST parameter does not cover an
extent to which any relationship is established.
is an example of the command description for Case 4. This example requests the
withdrawal of the relationships established within the copy source extent in the device numbered
4202 and the copy target extent in the device numbered 4203.
112
Performing Version 2 Operations