HP StorageWorks XP Remote Web Console Software - Manual (Page 47)

ShadowImage for z/OS user guide 47
ShadowImage main window. You can also open the Display Filter window by using the Display Filter
command.
Figure 20 Display Filter window
The Display Filter window has the following features:
• The CLPR drop-down list allows you to display the specified cache logical partition (CLPR).
• The Volume Type box:
• The Internal Vol check box allows you to display the internal volumes.
• The External Vol check box allows you to display the external volumes.
NOTE: Both check boxes are selected by default.
• The Attribute box:
• Select the Reserved check box to display reserved or unreserved volumes. If you select the Reserved
check box, only reserved volumes are displayed in the Volume List box. If you clear the Reserved
check box, only unreserved volumes are displayed.
• Selecting the Non-Pair check box displays non-paired (simplex) volumes.
• Use the Pair Status box to filter the pairs displayed in the Volume List box by pair status: Pending,
Duplex, Split, Resync, Suspend, Resync-R, V-Split, SP-Pend, Deleting, and F-Copy.
NOTE: All check boxes are selected by default.
• The OK button applies the settings and closes the Display Filter window.
• The Cancel button resets the settings and closes the Display Filter window.
NOTE: The filter settings are only effective within the current SI390 operations. If you switch to
another option program (for example, TC390), or click a button on the toolbar, the settings will be
reset.