HP StorageWorks XP Remote Web Console Software - Manual (Page 88)

88 Configuring arrays and logical paths
NOTE: If an error occurs, the right-most column of the Preset list displays the error code. To view
detailed information about the error, right-click the error code, and select Error Detail. An error
message appears providing detailed information about the error.
Figure 39 Add DKC pane
• DKC S/N: Remote array’s five-digit serial number.
• Controller ID: Remote array’s controller ID (that is, array family ID).
NOTE: The controller ID for an XP12000/XP10000 is 4.
• Path Gr. ID: Enter the path group ID. Path group IDs are used for identifying groups of logical paths.
One path group can contain up to eight logical paths.
Path group IDs are within the range of 0-FF (hexadecimal). If you select Default, the default path group
IDs is set.
NOTE: In the current version, you cannot enter path group IDs. Also, you cannot clear the Default
check box. The number of path group per one remote array is always 1.
• M-R Path: Logical paths from initiator ports on the local array to RCU target ports on the remote array.
• Port: Displays a list of initiator ports on the local array. Select an initiator port from this list.
• Pair-Port: Displays a list of all ports on the remote array. Select an RCU target port on the remote
array from this list.
NOTE: When specifying a port, use the keyboard to enter the port number. When entering the
port number, you can abbreviate the port number to two characters. For example, you can enter
1A instead of CL1-A. You can use uppercase and lowercase letters.
• Option: Displays the DKC Option pane (see ” Changing options for logical paths and arrays ” on
page 89).
• Cancel: Cancels settings made on the Add DKC pane, and closes the pane.